Changes between Version 1 and Version 2 of TracModPython


Ignore:
Timestamp:
Nov 5, 2016, 8:48:59 AM (3 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracModPython

    v1 v2  
    1 = Trac and mod_python =
    21[[TracGuideToc]]
    32
     3= Trac and mod_python
     4
     5Mod_python is an [https://httpd.apache.org/ Apache] module that embeds the Python interpreter within the server, so that web-based applications in Python will run many times faster than traditional CGI and will have the ability to retain database connections.
    46Trac supports [http://www.modpython.org/ mod_python], which speeds up Trac's response times considerably, especially compared to [TracCgi CGI], and permits use of many Apache features not possible with [wiki:TracStandalone tracd]/mod_proxy.
    57
    6 These instructions are for Apache 2; if you are still using Apache 1.3, you may have some luck with [wiki:TracModPython2.7 TracModPython2.7].
    7 
    8 == Simple configuration ==
     8[[PageOutline(2-3,Overview,inline)]]
     9
     10== Simple configuration: single project #Simpleconfiguration
    911
    1012If you just installed mod_python, you may have to add a line to load the module in the Apache configuration:
    11 {{{
     13{{{#!apache
    1214LoadModule python_module modules/mod_python.so
    1315}}}
    1416
    15  ''Note: The exact path to the module depends on how the HTTPD installation is laid out.''
    16 On Debian using apt-get
    17 {{{
     17'''Note''': The exact path to the module depends on how the HTTPD installation is laid out.
     18
     19On Debian using apt-get:
     20{{{#!sh
    1821apt-get install libapache2-mod-python libapache2-mod-python-doc
    1922}}}
    20 (Still on Debian) after you have installed mod_python, you must enable the modules in apache2 (equivalent of the above Load Module directive):
    21 {{{
    22 a2enmod mod_python
    23 }}}
     23
     24Still on Debian, after you have installed mod_python, you must enable the modules in apache2, equivalent to the above Load Module directive:
     25{{{#!sh
     26a2enmod python
     27}}}
     28
    2429On Fedora use, using yum:
    25 {{{
     30{{{#!sh
    2631yum install mod_python
    2732}}}
    28 You can test your mod_python installation by adding the following to your httpd.conf.  You should remove this when you are done testing for security reasons. Note: mod_python.testhandler is only available in mod_python 3.2+.
    29 {{{
    30 #!xml
     33
     34You can test your mod_python installation by adding the following to your httpd.conf. You should remove this when you are done testing for security reasons. Note: mod_python.testhandler is only available in mod_python 3.2+.
     35{{{#!apache
    3136<Location /mpinfo>
    32    SetHandler mod_python
    33    PythonInterpreter main_interpreter
    34    PythonHandler mod_python.testhandler
    35 </Location>
    36 }}}
    37 
    38 A simple setup of Trac on mod_python looks like this:
    39 {{{
    40 #!xml
    41 <Location /projects/myproject>
    42    SetHandler mod_python
    43    PythonInterpreter main_interpreter
    44    PythonHandler trac.web.modpython_frontend
    45    PythonOption TracEnv /var/trac/myproject
    46    PythonOption TracUriRoot /projects/myproject
    47 </Location>
    48 }}}
    49 
    50 The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration without it; if the URLs produced by Trac look wrong, if Trac does not seem to recognize URLs correctly, or you get an odd "No handler matched request to..." error, add the '''`TracUriRoot`''' option.  You will notice that the `Location` and '''`TracUriRoot`''' have the same path.
    51 
    52 The options available are
    53 {{{
    54     # For a single project
    55     PythonOption TracEnv /var/trac/myproject
    56     # For multiple projects
    57     PythonOption TracEnvParentDir /var/trac/myprojects
    58     # For the index of multiple projects
    59     PythonOption TracEnvIndexTemplate /srv/www/htdocs/trac/project_list_tepmlate.html
    60     # A space delimitted list, with a "," between key and value pairs.
    61     PythonOption TracTemplateVars key1,val1 key2,val2
    62     # Useful to get the date in the wanted order
    63     PythonOption TracLocale en_GB.UTF8
    64     # See description above       
    65     PythonOption TracUriRoot /projects/myproject
    66     # Override default python egg cache location
    67     PythonOption PYTHON_EGG_CACHE /var/trac/myprojects/egg-cache
    68 }}}
    69 
    70 === Configuring Authentication ===
    71 
    72 Creating password files and configuring authentication works similar to the process for [wiki:TracCgi#AddingAuthentication CGI]:
    73 {{{
    74 #!xml
    75 <Location /projects/myproject/login>
    76   AuthType Basic
    77   AuthName "myproject"
    78   AuthUserFile /var/trac/myproject/.htpasswd
    79   Require valid-user
    80 </Location>
    81 }}}
    82 
    83 Configuration for mod_ldap authentication in Apache is a bit tricky (httpd 2.2.x and OpenLDAP: slapd 2.3.19)
    84 
    85 1. You need to load the following modules in Apache httpd.conf
    86 {{{
    87 LoadModule ldap_module modules/mod_ldap.so
    88 LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    89 }}}
    90 
    91 2. Your httpd.conf also needs to look something like:
    92 
    93 {{{
    94 #!xml
    95 <Location /trac/>
    9637  SetHandler mod_python
    9738  PythonInterpreter main_interpreter
    98   PythonHandler trac.web.modpython_frontend
    99   PythonOption TracEnv /home/trac/
    100   PythonOption TracUriRoot /trac/
    101   Order deny,allow
    102   Deny from all
    103   Allow from 192.168.11.0/24
    104   AuthType Basic
    105   AuthName "Trac"
    106   AuthBasicProvider "ldap"
    107   AuthLDAPURL "ldap://127.0.0.1/dc=example,dc=co,dc=ke?uid?sub?(objectClass=inetOrgPerson)"
    108   authzldapauthoritative Off
    109   require valid-user
    110 </Location>
    111 }}}
    112 
    113 Or the LDAP interface to a Microsoft Active Directory:
    114 
    115 {{{
    116 #!xml
    117 <Location /trac/>
     39  PythonHandler mod_python.testhandler
     40  # For Apache 2.2
     41  <IfModule !mod_authz_core.c>
     42    Order allow,deny
     43    Allow from all
     44  </IfModule>
     45  # For Apache 2.4
     46  <IfModule mod_authz_core.c>
     47    Require all granted
     48  </IfModule>
     49</Location>
     50}}}
     51
     52A simple setup of Trac on mod_python looks like this:
     53{{{#!apache
     54<Location /projects/myproject>
    11855  SetHandler mod_python
    11956  PythonInterpreter main_interpreter
    120   PythonHandler trac.web.modpython_frontend
    121   PythonOption TracEnv /home/trac/
    122   PythonOption TracUriRoot /trac/
    123   Order deny,allow
    124   Deny from all
    125   Allow from 192.168.11.0/24
    126   AuthType Basic
    127   AuthName "Trac"
    128   AuthBasicProvider "ldap"
    129   AuthLDAPURL "ldap://adserver.company.com:3268/DC=company,DC=com?sAMAccountName?sub?(objectClass=user)"
    130   AuthLDAPBindDN       ldap-auth-user@company.com
    131   AuthLDAPBindPassword "the_password"
    132   authzldapauthoritative Off
    133   # require valid-user
    134   require ldap-group CN=Trac Users,CN=Users,DC=company,DC=com
    135 </Location>
    136 }}}
    137 
    138 Note 1: This is the case where the LDAP search will get around the multiple OUs, conecting to Global Catalog Server portion of AD (Notice the port is 3268, not the normal LDAP 389). The GCS is basically a "flattened" tree which allows searching for a user without knowing to which OU they belong.
    139 
    140 Note 2: Active Directory requires an authenticating user/password to access records (AuthLDAPBindDN and AuthLDAPBindPassword).
    141 
    142 Note 3: The directive "require ldap-group ..."  specifies an AD group whose members are allowed access.
    143 
    144 
    145 
    146 === Setting the !PythonPath ===
    147 
    148 If the Trac installation isn't installed in your Python path, you'll have to tell Apache where to find the Trac mod_python handler  using the `PythonPath` directive:
    149 {{{
    150 #!xml
     57  PythonHandler trac.web.modpython_frontend
     58  PythonOption TracEnv /var/trac/myproject
     59  PythonOption TracUriRoot /projects/myproject
     60  # For Apache 2.2
     61  <IfModule !mod_authz_core.c>
     62    Order allow,deny
     63    Allow from all
     64  </IfModule>
     65  # For Apache 2.4
     66  <IfModule mod_authz_core.c>
     67    Require all granted
     68  </IfModule>
     69</Location>
     70}}}
     71
     72The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration without it; if the URLs produced by Trac look wrong, if Trac does not seem to recognize URLs correctly, or you get an odd "No handler matched request to..." error, add the '''`TracUriRoot`''' option. You will notice that the `Location` and '''`TracUriRoot`''' have the same path.
     73
     74The options available are:
     75{{{#!apache
     76# For a single project
     77PythonOption TracEnv /var/trac/myproject
     78
     79# For multiple projects
     80PythonOption TracEnvParentDir /var/trac/myprojects
     81
     82# For the index of multiple projects
     83PythonOption TracEnvIndexTemplate /srv/www/htdocs/trac/project_list_template.html
     84
     85# A space delimitted list, with a "," between key and value pairs.
     86PythonOption TracTemplateVars key1,val1 key2,val2
     87
     88# Useful to get the date in the wanted order
     89PythonOption TracLocale en_GB.UTF8
     90
     91# See description above       
     92PythonOption TracUriRoot /projects/myproject
     93}}}
     94
     95=== Python Egg Cache
     96
     97Compressed Python eggs like Genshi are normally extracted into a directory named `.python-eggs` in the users home directory. Since Apache's home usually is not writeable, an alternate egg cache directory can be specified like this:
     98{{{#!apache
     99PythonOption PYTHON_EGG_CACHE /var/trac/myprojects/egg-cache
     100}}}
     101
     102Or you can uncompress the Genshi egg to resolve problems extracting from it.
     103
     104=== Configuring Authentication
     105
     106See corresponding section in the [wiki:TracModWSGI#ConfiguringAuthentication] page.
     107
     108== Advanced Configuration
     109
     110=== Setting the Python Egg Cache
     111
     112If the Egg Cache isn't writeable by your Web server, you'll either have to change the permissions, or point Python to a location where Apache can write. This can manifest itself as a `500 internal server error` and/or a complaint in the syslog.
     113
     114{{{#!apache
    151115<Location /projects/myproject>
    152116  ...
     117  PythonOption PYTHON_EGG_CACHE /tmp
     118  ...
     119</Location>
     120}}}
     121
     122=== Setting the !PythonPath
     123
     124If the Trac installation isn't installed in your Python path, you will have to tell Apache where to find the Trac mod_python handler  using the `PythonPath` directive:
     125{{{#!apache
     126<Location /projects/myproject>
     127  ...
    153128  PythonPath "sys.path + ['/path/to/trac']"
    154129  ...
     
    158133Be careful about using the !PythonPath directive, and ''not'' `SetEnv PYTHONPATH`, as the latter won't work.
    159134
    160 == Setting up multiple projects ==
     135=== Setting up multiple projects
    161136
    162137The Trac mod_python handler supports a configuration option similar to Subversion's `SvnParentPath`, called `TracEnvParentDir`:
    163 {{{
    164 #!xml
     138{{{#!apache
    165139<Location /projects>
    166140  SetHandler mod_python
     
    175149
    176150If you don't want to have the subdirectory listing as your projects home page you can use a
    177 {{{
    178 #!xml
     151{{{#!apache
    179152<LocationMatch "/.+/">
    180153}}}
     
    183156
    184157You can also use the same authentication realm for all of the projects using a `<LocationMatch>` directive:
    185 {{{
    186 #!xml
     158{{{#!apache
    187159<LocationMatch "/projects/[^/]+/login">
    188160  AuthType Basic
     
    193165}}}
    194166
    195 == Virtual Host Configuration ==
    196 
    197 Below is the sample configuration required to set up your trac as a virtual server (i.e. when you access it at the URLs like
    198 !http://trac.mycompany.com):
    199 
    200 {{{
    201 #!xml
    202 <VirtualHost * >
     167=== Virtual Host Configuration
     168
     169Below is the sample configuration required to set up your Trac as a virtual server, ie when you access it at the URLs like
     170`http://trac.mycompany.com`:
     171
     172{{{#!apache
     173<VirtualHost *>
    203174    DocumentRoot /var/www/myproject
    204175    ServerName trac.mycompany.com
     
    219190}}}
    220191
    221 if you have issues with login try using `<LocationMatch>` instead of `<Location>`
    222 
    223 For a virtual host that supports multiple projects replace "`TracEnv`" /var/trac/myproject with "`TracEnvParentDir`" /var/trac/
    224 
    225 Note: !DocumentRoot should not point to your Trac project env. As Asmodai wrote on #trac: "suppose there's a webserer bug that allows disclosure of !DocumentRoot they could then leech the entire Trac environment".
    226 
    227 == Troubleshooting ==
    228 
    229 In general, if you get server error pages, you can either check the Apache error log, or enable the `PythonDebug` option:
    230 {{{
    231 #!xml
     192This does not seem to work in all cases. What you can do if it does not:
     193 * Try using `<LocationMatch>` instead of `<Location>`.
     194 * `<Location />` may, in your server setup, refer to the complete host instead of simple the root of the server. This means that everything (including the login directory referenced below) will be sent to Python and authentication does not work, ie you get the infamous Authentication information missing error. If this is the case, try using a sub-directory for Trac instead of the root, ie /web/ and /web/login instead of / and /login.
     195 * Depending on apache's `NameVirtualHost` configuration, you may need to use `<VirtualHost *:80>` instead of `<VirtualHost *>`.
     196
     197For a virtual host that supports multiple projects replace `TracEnv /var/trac/myproject` with `TracEnvParentDir /var/trac`.
     198
     199'''Note''': !DocumentRoot should not point to your Trac project env. As Asmodai wrote on #trac: "suppose there's a webserver bug that allows disclosure of !DocumentRoot they could then leech the entire Trac environment".
     200
     201== Troubleshooting
     202
     203If you get server error pages, you can either check the Apache error log, or enable the `PythonDebug` option:
     204{{{#!apache
    232205<Location /projects/myproject>
    233206  ...
     
    238211For multiple projects, try restarting the server as well.
    239212
     213=== Login Not Working
     214
     215If you've used `<Location />` directive, it will override any other directives, as well as `<Location /login>`.
     216The workaround is to use negation expression as follows (for multi project setups):
     217{{{#!apache
     218#this one for other pages
     219<Location ~ "/*(?!login)">
     220   SetHandler mod_python
     221   PythonHandler trac.web.modpython_frontend
     222   PythonOption TracEnvParentDir /projects
     223   PythonOption TracUriRoot /
     224</Location>
     225
     226#this one for login page
     227<Location ~ "/[^/]+/login">
     228   SetHandler mod_python
     229   PythonHandler trac.web.modpython_frontend
     230   PythonOption TracEnvParentDir /projects
     231   PythonOption TracUriRoot /
     232
     233   #remove these if you don't want to force SSL
     234   RewriteEngine On
     235   RewriteCond %{HTTPS} off
     236   RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
     237
     238   AuthType Basic
     239   AuthName "Trac"
     240   AuthUserFile /projects/.htpasswd
     241   Require valid-user
     242</Location>
     243}}}
     244
    240245=== Expat-related segmentation faults === #expat
    241246
    242247This problem will most certainly hit you on Unix when using Python 2.4.
    243 In Python 2.4, some version of Expat (an XML parser library written in C) is used,
    244 and if Apache is using another version, this results in segmentation faults.
    245 As Trac 0.11 is using Genshi, which will indirectly use Expat, that problem
    246 can now hit you even if everything was working fine before with Trac 0.10.
    247 
    248 See Graham Dumpleton's detailed [http://www.dscpl.com.au/wiki/ModPython/Articles/ExpatCausingApacheCrash explanation and workarounds] for the issue.
    249 
    250 === Form submission problems ===
     248In Python 2.4, some version of [http://expat.sourceforge.net/ Expat] (an XML parser library written in C) is used and if Apache is using another version, this results in segmentation faults.
     249As Trac 0.11 is using Genshi, which will indirectly use Expat, that problem can now hit you even if everything was working fine before with Trac 0.10. This problem has not been reported for Python 2.5+, so best to upgrade.
     250
     251=== Form submission problems
    251252
    252253If you're experiencing problems submitting some of the forms in Trac (a common problem is that you get redirected to the start page after submission), check whether your {{{DocumentRoot}}} contains a folder or file with the same path that you mapped the mod_python handler to. For some reason, mod_python gets confused when it is mapped to a location that also matches a static resource.
    253254
    254 === Problem with virtual host configuration ===
    255 
    256 If the <Location /> directive is used, setting the `DocumentRoot` may result in a ''403 (Forbidden)'' error. Either remove the `DocumentRoot` directive, or make sure that accessing the directory it points is allowed (in a corresponding `<Directory>` block).
    257 
    258 Using <Location /> together with `SetHandler` resulted in having everything handled by mod_python, which leads to not being able download any CSS or images/icons. I used <Location /trac> `SetHandler None` </Location> to circumvent the problem, though I do not know if this is the most elegant solution.
    259 
    260 === Using .htaccess ===
     255=== Problem with virtual host configuration
     256
     257If the <Location /> directive is used, setting the `DocumentRoot` may result in a ''403 (Forbidden)'' error. Either remove the `DocumentRoot` directive, or make sure that accessing the directory it points is allowed, in a corresponding `<Directory>` block.
     258
     259Using <Location /> together with `SetHandler` resulted in having everything handled by mod_python, which leads to not being able to download any CSS or images/icons. Use <Location /trac> `SetHandler None` </Location> to circumvent the problem, though this may not be the most elegant solution.
     260
     261=== Problem with zipped egg
     262
     263It's possible that your version of mod_python will not import modules from zipped eggs. If you encounter an `ImportError: No module named trac` in your Apache logs but you think everything is where it should be, this might be your problem. Look in your site-packages directory; if the Trac module appears as a ''file'' rather than a ''directory'', then this might be your problem. To rectify this, try installing Trac using the `--always-unzip` option:
     264
     265{{{#!sh
     266easy_install --always-unzip Trac-0.12b1.zip
     267}}}
     268
     269=== Using .htaccess
    261270
    262271Although it may seem trivial to rewrite the above configuration as a directory in your document root with a `.htaccess` file, this does not work. Apache will append a "/" to any Trac URLs, which interferes with its correct operation.
    263272
    264 It may be possible to work around this with mod_rewrite, but I failed to get this working. In all, it is more hassle than it is worth. Stick to the provided instructions. :)
    265 
    266 === Win32 Issues ===
    267 If you run trac with mod_python < 3.2 on Windows, uploading attachments will '''not''' work. This problem is resolved in mod_python 3.1.4 or later, so please upgrade mod_python to fix this.
    268 
    269 
    270 === OS X issues ===
    271 
    272 When using mod_python on OS X you will not be able to restart Apache using `apachectl restart`. This is apparently fixed in mod_python 3.2, but there's also a patch available for earlier versions [http://www.dscpl.com.au/projects/vampire/patches.html here].
    273 
    274 === SELinux issues ===
    275 
    276 If Trac reports something like: ''Cannot get shared lock on db.lock''
    277 The security context on the repository may need to be set:
    278 
    279 {{{
     273It may be possible to work around this with mod_rewrite, but I failed to get this working. In all, it is more hassle than it is worth.
     274
     275This also works out-of-box, with following trivial config:
     276{{{#!apache
     277SetHandler mod_python
     278PythonInterpreter main_interpreter
     279PythonHandler trac.web.modpython_frontend
     280PythonOption TracEnv /system/path/to/this/directory
     281PythonOption TracUriRoot /path/on/apache
     282
     283AuthType Basic
     284AuthName "ProjectName"
     285AuthUserFile /path/to/.htpasswd
     286Require valid-user
     287}}}
     288
     289The `TracUriRoot` is obviously the path you need to enter to the browser to get to Trac, eg `domain.tld/projects/trac`.
     290
     291=== Additional .htaccess help
     292
     293If you are using the .htaccess method you may have additional problems if your Trac directory is inheriting .htaccess directives from another. This may also help to add to your .htaccess file:
     294
     295{{{#!apache
     296<IfModule mod_rewrite.c>
     297  RewriteEngine Off
     298</IfModule>
     299}}}
     300
     301=== Platform specific issues
     302==== Win32 Issues
     303
     304If you run Trac with mod_python < 3.2 on Windows, uploading attachments will '''not''' work. This problem is resolved in mod_python 3.1.4 or later, so please upgrade mod_python to fix this.
     305
     306==== OS X issues
     307
     308When using mod_python on OS X you will not be able to restart Apache using `apachectl restart`. This is apparently fixed in mod_python 3.2, so please upgrade mod_python to fix this.
     309
     310==== SELinux issues
     311
     312If Trac reports something like: `Cannot get shared lock on db.lock`, then the security context on the repository may need to be set:
     313
     314{{{#!sh
    280315chcon -R -h -t httpd_sys_content_t PATH_TO_REPOSITORY
    281316}}}
    282317
    283 See also [[http://subversion.tigris.org/faq.html#reposperms]]
    284 
    285 === FreeBSD issues ===
    286 Pay attention to the version of the installed mod_python and sqlite packages. Ports have both the new and old ones, but earlier versions of pysqlite and mod_python won't integrate as the former requires threaded support in python, and the latter requires a threadless install.
    287 
    288 If you compiled and installed apache2, apache wouldn´t support threads (cause it doesn´t work very well on FreeBSD). You could force thread support when running ./configure for apache, using --enable-threads, but this isn´t recommendable.
    289 The best option [[http://modpython.org/pipermail/mod_python/2006-September/021983.html seems to be]] adding to /usr/local/apache2/bin/ennvars the line
    290 
    291 {{{
     318See also [http://subversion.apache.org/faq.html#reposperms How do I set repository permissions correctly?]
     319
     320==== FreeBSD issues
     321
     322The FreeBSD ports have both the new and old versions of mod_python and SQLite, but earlier versions of pysqlite and mod_python won't integrate:
     323 * pysqlite requires threaded support in Python
     324 * mod_python requires a threadless install.
     325
     326Apache2 does not automatically support threads on FreeBSD. You could force thread support when running `./configure` for Apache, using `--enable-threads`, but this isn´t recommended.
     327The best option [http://modpython.org/pipermail/mod_python/2006-September/021983.html seems to be] adding to /usr/local/apache2/bin/ennvars the line:
     328
     329{{{#!sh
    292330export LD_PRELOAD=/usr/lib/libc_r.so
    293331}}}
    294332
    295 === Subversion issues ===
    296 
    297 If you get the following Trac Error `Unsupported version control system "svn"` only under mod_python, though it works well on the command-line and even with TracStandalone, chances are that you forgot to add the path to the Python bindings with the [TracModPython#ConfiguringPythonPath PythonPath] directive. (The better way is to add a link to the bindings in the Python `site-packages` directory, or create a `.pth` file in that directory.)
    298 
    299 If this is not the case, it's possible that you're using Subversion libraries that are binary incompatible with the apache ones (an incompatibility of the `apr` libraries is usually the cause). In that case, you also won't be able to use the svn modules for Apache (`mod_dav_svn`).
    300 
    301 You also need a recent version of `mod_python` in order to avoid a runtime error ({{{argument number 2: a 'apr_pool_t *' is expected}}}) due to the default usage of multiple sub-interpreters. 3.2.8 ''should'' work, though it's probably better to use the workaround described in #3371, in order to force the use of the main interpreter:
    302 {{{
     333==== Fedora 7 Issues
     334
     335Make sure you install the 'python-sqlite2' package as it seems to be required for TracModPython, but not for tracd.
     336
     337=== Subversion issues
     338
     339If you get the following Trac error `Unsupported version control system "svn"` only under mod_python, though it works well on the command-line and even with TracStandalone, chances are that you forgot to add the path to the Python bindings with the [TracModPython#ConfiguringPythonPath PythonPath] directive. A better way is to add a link to the bindings in the Python `site-packages` directory, or create a `.pth` file in that directory.
     340
     341If this is not the case, it's possible that you are using Subversion libraries that are binary incompatible with the Apache ones and an incompatibility of the `apr` libraries is usually the cause. In that case, you also won't be able to use the svn modules for Apache (`mod_dav_svn`).
     342
     343You also need a recent version of `mod_python` in order to avoid a runtime error ({{{argument number 2: a 'apr_pool_t *' is expected}}}) due to the default usage of multiple sub-interpreters. Version 3.2.8 ''should'' work, though it's probably better to use the workaround described in [trac:#3371 #3371], in order to force the use of the main interpreter:
     344{{{#!apache
    303345PythonInterpreter main_interpreter
    304346}}}
    305 This is anyway the recommended workaround for other well-known issues seen when using the Python bindings for Subversion within mod_python (#2611, #3455). See in particular Graham Dumpleton's comment in [comment:ticket:3455:9 #3455] explaining the issue.
    306 
    307 === Page layout issues ===
    308 
    309 If the formatting of the Trac pages look weird chances are that the style sheets governing the page layout are not handled properly by the web server. Try adding the following lines to your apache configuration:
    310 {{{
    311 #!xml
     347
     348This is also the recommended workaround for other issues seen when using the Python bindings for Subversion within mod_python ([trac:#2611 #2611], [trac:#3455 #3455]). See in particular Graham Dumpleton's comment in [trac:comment:9:ticket:3455 #3455] explaining the issue.
     349
     350=== Page layout issues
     351
     352If the formatting of the Trac pages look weird, chances are that the style sheets governing the page layout are not handled properly by the web server. Try adding the following lines to your Apache configuration:
     353{{{#!apache
    312354Alias /myproject/css "/usr/share/trac/htdocs/css"
    313355<Location /myproject/css>
     
    316358}}}
    317359
    318 Note: For the above configuration to have any effect it must be put after the configuration of your project root location, i.e. {{{<Location /myproject />}}}.
    319 
    320 === HTTPS issues ===
    321 
    322 If you want to run Trac fully under https you might find that it tries to redirect to plain http. In this case just add the following line to your apache configuration:
    323 {{{
    324 #!xml
    325 <VirtualHost * >
     360'''Note''': For the above configuration to have any effect it must be put after the configuration of your project root location, ie {{{<Location /myproject />}}}.
     361
     362**Note:** Do not enable python optimizations using the directive `PythonOptimize On`. When optimizations are enabled the page header/footer and documentation for macros and plugins will be hidden. An error will be raised in Trac 1.0.11 and later when optimizations are enabled.
     363
     364=== HTTPS issues
     365
     366If you want to run Trac fully under https you might find that it tries to redirect to plain http. In this case just add the following line to your Apache configuration:
     367{{{#!apache
     368<VirtualHost *>
    326369    DocumentRoot /var/www/myproject
    327370    ServerName trac.mycompany.com
     
    331374}}}
    332375
    333 === Fedora 7 Issues ===
    334 Make sure you install the 'python-sqlite2' package as it seems to be required for TracModPython but not for tracd
    335 
    336 
    337 === Segmentation fault with php5-mhash or other php5 modules ===
    338 You may encounter segfaults (reported on debian etch) if php5-mhash module is installed. Try to remove it to see if this solves the problem. See debian bug report [[http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=411487]]
    339 
    340 Some people also have troubles when using php5 compiled with its own 3rd party libraries instead of system libraries. Check here [[http://www.djangoproject.com/documentation/modpython/#if-you-get-a-segmentation-fault]]
     376=== Segmentation fault with php5-mhash or other php5 modules
     377
     378You may encounter segfaults (reported on Debian etch) if php5-mhash module is installed. Try to remove it to see if this solves the problem. See [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=411487 Debian bug report].
     379
     380Some people also have troubles when using PHP5 compiled with its own third party libraries instead of system libraries. Check [http://www.djangoproject.com/documentation/modpython/#if-you-get-a-segmentation-fault Django segmentation fault].
    341381
    342382----
    343 See also TracGuide, TracInstall, TracCgi, TracFastCgi
     383See also: TracGuide, TracInstall, [wiki:TracModWSGI ModWSGI], [wiki:TracFastCgi FastCGI], [trac:TracNginxRecipe]