rfc2616-symrefs.txt   draft-ietf-httpbis-p1-messaging-00.txt 
Network Working Group R. Fielding Network Working Group R. Fielding, Ed.
Internet-Draft UC Irvine Internet-Draft Day Software
Obsoletes: 2068 (if approved) J. Gettys Obsoletes: 2068, 2616 J. Gettys
Intended status: Standards Track Compaq/W3C (if approved) One Laptop per Child
Expires: December 3, 1999 J. Mogul Intended status: Standards Track J. Mogul
Compaq Expires: June 22, 2008 HP
H. Frystyk H. Frystyk
W3C/MIT Microsoft
L. Masinter L. Masinter
Xerox Adobe Systems
P. Leach P. Leach
Microsoft Microsoft
T. Berners-Lee T. Berners-Lee
W3C/MIT W3C/MIT
Hypertext Transfer Protocol -- HTTP/1.1 December 20, 2007
rfc2616-symrefs
HTTP/1.1, part 1: URIs, Connections, and Message Parsing
draft-ietf-httpbis-p1-messaging-00
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 43 skipping to change at page 1, line 45
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on December 3, 1999. This Internet-Draft will expire on June 22, 2008.
Copyright Notice Copyright Notice
Copyright (C) The IETF Trust (1999). Copyright (C) The IETF Trust (2007).
Abstract Abstract
The Hypertext Transfer Protocol (HTTP) is an application-level The Hypertext Transfer Protocol (HTTP) is an application-level
protocol for distributed, collaborative, hypermedia information protocol for distributed, collaborative, hypermedia information
systems. It is a generic, stateless, protocol which can be used for systems. HTTP has been in use by the World Wide Web global
many tasks beyond its use for hypertext, such as name servers and information initiative since 1990. This document is Part 1 of the
distributed object management systems, through extension of its seven-part specification that defines the protocol referred to as
request methods, error codes and headers [RFC2324]. A feature of "HTTP/1.1" and, taken together, obsoletes RFC 2616. Part 1 provides
HTTP is the typing and negotiation of data representation, allowing an overview of HTTP and its associated terminology, defines the
systems to be built independently of the data being transferred. "http" and "https" Uniform Resource Identifier (URI) schemes, defines
the generic message syntax and parsing requirements for HTTP message
HTTP has been in use by the World-Wide Web global information frames, and describes general security concerns for implementations.
initiative since 1990. This specification defines the protocol
referred to as "HTTP/1.1", and is an update to RFC 2068 [RFC2068].
Editorial Note (To be removed by RFC Editor) Editorial Note (To be removed by RFC Editor)
This version of the HTTP specification contains only XML processing This version of the HTTP specification contains only minimal
changes from [RFC2616] in internet-draft form for use in creating editorial changes from [RFC2616] (abstract, introductory paragraph,
diffs. and authors' addresses). All other changes are due to partitioning
the original into seven mostly independent parts. The intent is for
readers of future drafts to able to use draft 00 as the basis for
comparison when the WG makes later changes to the specification text.
This draft will shortly be followed by draft 01 (containing the first
round of changes that have already been agreed to on the mailing
list). There is no point in reviewing this draft other than to
verify that the partitioning has been done correctly. Roy T.
Fielding, Yves Lafon, and Julian Reschke will be the editors after
draft 00 is submitted.
Discussion of this draft should take place on the HTTPBIS working
group mailing list (ietf-http-wg@w3.org). The current issues list is
at <http://www3.tools.ietf.org/wg/httpbis/trac/report/11> and related
documents (including fancy diffs) can be found at
<http://www3.tools.ietf.org/wg/httpbis/>.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2. Requirements . . . . . . . . . . . . . . . . . . . . . . 9 1.2. Requirements . . . . . . . . . . . . . . . . . . . . . . . 6
1.3. Terminology . . . . . . . . . . . . . . . . . . . . . . 10 1.3. Terminology . . . . . . . . . . . . . . . . . . . . . . . 6
1.4. Overall Operation . . . . . . . . . . . . . . . . . . . 14 1.4. Overall Operation . . . . . . . . . . . . . . . . . . . . 9
2. Notational Conventions and Generic Grammar . . . . . . . . . 16 2. Notational Conventions and Generic Grammar . . . . . . . . . . 11
2.1. Augmented BNF . . . . . . . . . . . . . . . . . . . . . 16 2.1. Augmented BNF . . . . . . . . . . . . . . . . . . . . . . 11
2.2. Basic Rules . . . . . . . . . . . . . . . . . . . . . . 18 2.2. Basic Rules . . . . . . . . . . . . . . . . . . . . . . . 13
3. Protocol Parameters . . . . . . . . . . . . . . . . . . . . . 20 3. Protocol Parameters . . . . . . . . . . . . . . . . . . . . . 15
3.1. HTTP Version . . . . . . . . . . . . . . . . . . . . . . 20 3.1. HTTP Version . . . . . . . . . . . . . . . . . . . . . . . 15
3.2. Uniform Resource Identifiers . . . . . . . . . . . . . . 21 3.2. Uniform Resource Identifiers . . . . . . . . . . . . . . . 16
3.2.1. General Syntax . . . . . . . . . . . . . . . . . . . 21 3.2.1. General Syntax . . . . . . . . . . . . . . . . . . . . 16
3.2.2. http URL . . . . . . . . . . . . . . . . . . . . . . 22 3.2.2. http URL . . . . . . . . . . . . . . . . . . . . . . . 17
3.2.3. URI Comparison . . . . . . . . . . . . . . . . . . . 22 3.2.3. URI Comparison . . . . . . . . . . . . . . . . . . . . 17
3.3. Date/Time Formats . . . . . . . . . . . . . . . . . . . 23 3.3. Date/Time Formats . . . . . . . . . . . . . . . . . . . . 18
3.3.1. Full Date . . . . . . . . . . . . . . . . . . . . . 23 3.3.1. Full Date . . . . . . . . . . . . . . . . . . . . . . 18
3.3.2. Delta Seconds . . . . . . . . . . . . . . . . . . . 24 3.4. Transfer Codings . . . . . . . . . . . . . . . . . . . . . 19
3.4. Character Sets . . . . . . . . . . . . . . . . . . . . . 24 3.4.1. Chunked Transfer Coding . . . . . . . . . . . . . . . 20
3.4.1. Missing Charset . . . . . . . . . . . . . . . . . . 25 4. HTTP Message . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.5. Content Codings . . . . . . . . . . . . . . . . . . . . 25 4.1. Message Types . . . . . . . . . . . . . . . . . . . . . . 22
3.6. Transfer Codings . . . . . . . . . . . . . . . . . . . . 27 4.2. Message Headers . . . . . . . . . . . . . . . . . . . . . 23
3.6.1. Chunked Transfer Coding . . . . . . . . . . . . . . 28 4.3. Message Body . . . . . . . . . . . . . . . . . . . . . . . 24
3.7. Media Types . . . . . . . . . . . . . . . . . . . . . . 29 4.4. Message Length . . . . . . . . . . . . . . . . . . . . . . 25
3.7.1. Canonicalization and Text Defaults . . . . . . . . . 30 4.5. General Header Fields . . . . . . . . . . . . . . . . . . 26
3.7.2. Multipart Types . . . . . . . . . . . . . . . . . . 30 5. Request . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.8. Product Tokens . . . . . . . . . . . . . . . . . . . . . 31 5.1. Request-Line . . . . . . . . . . . . . . . . . . . . . . . 27
3.9. Quality Values . . . . . . . . . . . . . . . . . . . . . 32 5.1.1. Method . . . . . . . . . . . . . . . . . . . . . . . . 27
3.10. Language Tags . . . . . . . . . . . . . . . . . . . . . 32 5.1.2. Request-URI . . . . . . . . . . . . . . . . . . . . . 27
3.11. Entity Tags . . . . . . . . . . . . . . . . . . . . . . 33 5.2. The Resource Identified by a Request . . . . . . . . . . . 28
3.12. Range Units . . . . . . . . . . . . . . . . . . . . . . 33 6. Response . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4. HTTP Message . . . . . . . . . . . . . . . . . . . . . . . . 34 6.1. Status-Line . . . . . . . . . . . . . . . . . . . . . . . 29
4.1. Message Types . . . . . . . . . . . . . . . . . . . . . 34 6.1.1. Status Code and Reason Phrase . . . . . . . . . . . . 30
4.2. Message Headers . . . . . . . . . . . . . . . . . . . . 34 7. Connections . . . . . . . . . . . . . . . . . . . . . . . . . 30
4.3. Message Body . . . . . . . . . . . . . . . . . . . . . . 35 7.1. Persistent Connections . . . . . . . . . . . . . . . . . . 30
4.4. Message Length . . . . . . . . . . . . . . . . . . . . . 36 7.1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . 30
4.5. General Header Fields . . . . . . . . . . . . . . . . . 37 7.1.2. Overall Operation . . . . . . . . . . . . . . . . . . 31
5. Request . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 7.1.3. Proxy Servers . . . . . . . . . . . . . . . . . . . . 33
5.1. Request-Line . . . . . . . . . . . . . . . . . . . . . . 38 7.1.4. Practical Considerations . . . . . . . . . . . . . . . 33
5.1.1. Method . . . . . . . . . . . . . . . . . . . . . . . 38 7.2. Message Transmission Requirements . . . . . . . . . . . . 34
5.1.2. Request-URI . . . . . . . . . . . . . . . . . . . . 39 7.2.1. Persistent Connections and Flow Control . . . . . . . 34
5.2. The Resource Identified by a Request . . . . . . . . . . 40 7.2.2. Monitoring Connections for Error Status Messages . . . 34
5.3. Request Header Fields . . . . . . . . . . . . . . . . . 41 7.2.3. Use of the 100 (Continue) Status . . . . . . . . . . . 34
6. Response . . . . . . . . . . . . . . . . . . . . . . . . . . 42 7.2.4. Client Behavior if Server Prematurely Closes
6.1. Status-Line . . . . . . . . . . . . . . . . . . . . . . 42 Connection . . . . . . . . . . . . . . . . . . . . . . 36
6.1.1. Status Code and Reason Phrase . . . . . . . . . . . 43 8. Header Field Definitions . . . . . . . . . . . . . . . . . . . 37
6.2. Response Header Fields . . . . . . . . . . . . . . . . . 45 8.1. Connection . . . . . . . . . . . . . . . . . . . . . . . . 37
7. Entity . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 8.2. Content-Length . . . . . . . . . . . . . . . . . . . . . . 38
7.1. Entity Header Fields . . . . . . . . . . . . . . . . . . 46 8.3. Date . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.2. Entity Body . . . . . . . . . . . . . . . . . . . . . . 46 8.3.1. Clockless Origin Server Operation . . . . . . . . . . 40
7.2.1. Type . . . . . . . . . . . . . . . . . . . . . . . . 46 8.4. Host . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
7.2.2. Entity Length . . . . . . . . . . . . . . . . . . . 47 8.5. TE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
8. Connections . . . . . . . . . . . . . . . . . . . . . . . . . 47 8.6. Trailer . . . . . . . . . . . . . . . . . . . . . . . . . 42
8.1. Persistent Connections . . . . . . . . . . . . . . . . . 47 8.7. Transfer-Encoding . . . . . . . . . . . . . . . . . . . . 43
8.1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . 47 8.8. Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . 43
8.1.2. Overall Operation . . . . . . . . . . . . . . . . . 48 8.9. Via . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
8.1.3. Proxy Servers . . . . . . . . . . . . . . . . . . . 49 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 46
8.1.4. Practical Considerations . . . . . . . . . . . . . . 50 10. Security Considerations . . . . . . . . . . . . . . . . . . . 46
8.2. Message Transmission Requirements . . . . . . . . . . . 51 10.1. Personal Information . . . . . . . . . . . . . . . . . . . 46
8.2.1. Persistent Connections and Flow Control . . . . . . 51 10.2. Abuse of Server Log Information . . . . . . . . . . . . . 46
8.2.2. Monitoring Connections for Error Status Messages . . 51 10.3. Attacks Based On File and Path Names . . . . . . . . . . . 46
8.2.3. Use of the 100 (Continue) Status . . . . . . . . . . 51 10.4. DNS Spoofing . . . . . . . . . . . . . . . . . . . . . . . 47
8.2.4. Client Behavior if Server Prematurely Closes 10.5. Proxies and Caching . . . . . . . . . . . . . . . . . . . 47
Connection . . . . . . . . . . . . . . . . . . . . . 53 10.6. Denial of Service Attacks on Proxies . . . . . . . . . . . 48
9. Method Definitions . . . . . . . . . . . . . . . . . . . . . 54 11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 48
9.1. Safe and Idempotent Methods . . . . . . . . . . . . . . 54 12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 50
9.1.1. Safe Methods . . . . . . . . . . . . . . . . . . . . 54 Appendix A. Internet Media Type message/http and
9.1.2. Idempotent Methods . . . . . . . . . . . . . . . . . 54 application/http . . . . . . . . . . . . . . . . . . 53
9.2. OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . 55 Appendix B. Tolerant Applications . . . . . . . . . . . . . . . . 54
9.3. GET . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Appendix C. Conversion of Date Formats . . . . . . . . . . . . . 55
9.4. HEAD . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Appendix D. Compatibility with Previous Versions . . . . . . . . 55
9.5. POST . . . . . . . . . . . . . . . . . . . . . . . . . . 57 D.1. Changes from HTTP/1.0 . . . . . . . . . . . . . . . . . . 56
9.6. PUT . . . . . . . . . . . . . . . . . . . . . . . . . . 58 D.1.1. Changes to Simplify Multi-homed Web Servers and
9.7. DELETE . . . . . . . . . . . . . . . . . . . . . . . . . 59 Conserve IP Addresses . . . . . . . . . . . . . . . . 56
9.8. TRACE . . . . . . . . . . . . . . . . . . . . . . . . . 59 D.2. Compatibility with HTTP/1.0 Persistent Connections . . . . 56
9.9. CONNECT . . . . . . . . . . . . . . . . . . . . . . . . 60 D.3. Changes from RFC 2068 . . . . . . . . . . . . . . . . . . 57
10. Status Code Definitions . . . . . . . . . . . . . . . . . . . 60 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10.1. Informational 1xx . . . . . . . . . . . . . . . . . . . 60 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 61
10.1.1. 100 Continue . . . . . . . . . . . . . . . . . . . . 61 Intellectual Property and Copyright Statements . . . . . . . . . . 63
10.1.2. 101 Switching Protocols . . . . . . . . . . . . . . 61
10.2. Successful 2xx . . . . . . . . . . . . . . . . . . . . . 61
10.2.1. 200 OK . . . . . . . . . . . . . . . . . . . . . . . 61
10.2.2. 201 Created . . . . . . . . . . . . . . . . . . . . 62
10.2.3. 202 Accepted . . . . . . . . . . . . . . . . . . . . 62
10.2.4. 203 Non-Authoritative Information . . . . . . . . . 62
10.2.5. 204 No Content . . . . . . . . . . . . . . . . . . . 63
10.2.6. 205 Reset Content . . . . . . . . . . . . . . . . . 63
10.2.7. 206 Partial Content . . . . . . . . . . . . . . . . 63
10.3. Redirection 3xx . . . . . . . . . . . . . . . . . . . . 64
10.3.1. 300 Multiple Choices . . . . . . . . . . . . . . . . 64
10.3.2. 301 Moved Permanently . . . . . . . . . . . . . . . 65
10.3.3. 302 Found . . . . . . . . . . . . . . . . . . . . . 65
10.3.4. 303 See Other . . . . . . . . . . . . . . . . . . . 66
10.3.5. 304 Not Modified . . . . . . . . . . . . . . . . . . 66
10.3.6. 305 Use Proxy . . . . . . . . . . . . . . . . . . . 67
10.3.7. 306 (Unused) . . . . . . . . . . . . . . . . . . . . 67
10.3.8. 307 Temporary Redirect . . . . . . . . . . . . . . . 67
10.4. Client Error 4xx . . . . . . . . . . . . . . . . . . . . 68
10.4.1. 400 Bad Request . . . . . . . . . . . . . . . . . . 68
10.4.2. 401 Unauthorized . . . . . . . . . . . . . . . . . . 68
10.4.3. 402 Payment Required . . . . . . . . . . . . . . . . 69
10.4.4. 403 Forbidden . . . . . . . . . . . . . . . . . . . 69
10.4.5. 404 Not Found . . . . . . . . . . . . . . . . . . . 69
10.4.6. 405 Method Not Allowed . . . . . . . . . . . . . . . 69
10.4.7. 406 Not Acceptable . . . . . . . . . . . . . . . . . 69
10.4.8. 407 Proxy Authentication Required . . . . . . . . . 70
10.4.9. 408 Request Timeout . . . . . . . . . . . . . . . . 70
10.4.10. 409 Conflict . . . . . . . . . . . . . . . . . . . . 70
10.4.11. 410 Gone . . . . . . . . . . . . . . . . . . . . . . 71
10.4.12. 411 Length Required . . . . . . . . . . . . . . . . 71
10.4.13. 412 Precondition Failed . . . . . . . . . . . . . . 71
10.4.14. 413 Request Entity Too Large . . . . . . . . . . . . 71
10.4.15. 414 Request-URI Too Long . . . . . . . . . . . . . . 72
10.4.16. 415 Unsupported Media Type . . . . . . . . . . . . . 72
10.4.17. 416 Requested Range Not Satisfiable . . . . . . . . 72
10.4.18. 417 Expectation Failed . . . . . . . . . . . . . . . 72
10.5. Server Error 5xx . . . . . . . . . . . . . . . . . . . . 72
10.5.1. 500 Internal Server Error . . . . . . . . . . . . . 73
10.5.2. 501 Not Implemented . . . . . . . . . . . . . . . . 73
10.5.3. 502 Bad Gateway . . . . . . . . . . . . . . . . . . 73
10.5.4. 503 Service Unavailable . . . . . . . . . . . . . . 73
10.5.5. 504 Gateway Timeout . . . . . . . . . . . . . . . . 73
10.5.6. 505 HTTP Version Not Supported . . . . . . . . . . . 74
11. Access Authentication . . . . . . . . . . . . . . . . . . . . 74
12. Content Negotiation . . . . . . . . . . . . . . . . . . . . . 74
12.1. Server-driven Negotiation . . . . . . . . . . . . . . . 75
12.2. Agent-driven Negotiation . . . . . . . . . . . . . . . . 76
12.3. Transparent Negotiation . . . . . . . . . . . . . . . . 76
13. Caching in HTTP . . . . . . . . . . . . . . . . . . . . . . . 77
13.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
13.1.1. Cache Correctness . . . . . . . . . . . . . . . . . 78
13.1.2. Warnings . . . . . . . . . . . . . . . . . . . . . . 79
13.1.3. Cache-control Mechanisms . . . . . . . . . . . . . . 80
13.1.4. Explicit User Agent Warnings . . . . . . . . . . . . 80
13.1.5. Exceptions to the Rules and Warnings . . . . . . . . 81
13.1.6. Client-controlled Behavior . . . . . . . . . . . . . 81
13.2. Expiration Model . . . . . . . . . . . . . . . . . . . . 82
13.2.1. Server-Specified Expiration . . . . . . . . . . . . 82
13.2.2. Heuristic Expiration . . . . . . . . . . . . . . . . 83
13.2.3. Age Calculations . . . . . . . . . . . . . . . . . . 83
13.2.4. Expiration Calculations . . . . . . . . . . . . . . 85
13.2.5. Disambiguating Expiration Values . . . . . . . . . . 86
13.2.6. Disambiguating Multiple Responses . . . . . . . . . 87
13.3. Validation Model . . . . . . . . . . . . . . . . . . . . 87
13.3.1. Last-Modified Dates . . . . . . . . . . . . . . . . 88
13.3.2. Entity Tag Cache Validators . . . . . . . . . . . . 88
13.3.3. Weak and Strong Validators . . . . . . . . . . . . . 89
13.3.4. Rules for When to Use Entity Tags and
Last-Modified Dates . . . . . . . . . . . . . . . . 91
13.3.5. Non-validating Conditionals . . . . . . . . . . . . 93
13.4. Response Cacheability . . . . . . . . . . . . . . . . . 93
13.5. Constructing Responses From Caches . . . . . . . . . . . 94
13.5.1. End-to-end and Hop-by-hop Headers . . . . . . . . . 94
13.5.2. Non-modifiable Headers . . . . . . . . . . . . . . . 95
13.5.3. Combining Headers . . . . . . . . . . . . . . . . . 96
13.5.4. Combining Byte Ranges . . . . . . . . . . . . . . . 97
13.6. Caching Negotiated Responses . . . . . . . . . . . . . . 98
13.7. Shared and Non-Shared Caches . . . . . . . . . . . . . . 99
13.8. Errors or Incomplete Response Cache Behavior . . . . . . 99
13.9. Side Effects of GET and HEAD . . . . . . . . . . . . . . 100
13.10. Invalidation After Updates or Deletions . . . . . . . . 100
13.11. Write-Through Mandatory . . . . . . . . . . . . . . . . 101
13.12. Cache Replacement . . . . . . . . . . . . . . . . . . . 101
13.13. History Lists . . . . . . . . . . . . . . . . . . . . . 102
14. Header Field Definitions . . . . . . . . . . . . . . . . . . 102
14.1. Accept . . . . . . . . . . . . . . . . . . . . . . . . . 102
14.2. Accept-Charset . . . . . . . . . . . . . . . . . . . . . 104
14.3. Accept-Encoding . . . . . . . . . . . . . . . . . . . . 105
14.4. Accept-Language . . . . . . . . . . . . . . . . . . . . 106
14.5. Accept-Ranges . . . . . . . . . . . . . . . . . . . . . 108
14.6. Age . . . . . . . . . . . . . . . . . . . . . . . . . . 108
14.7. Allow . . . . . . . . . . . . . . . . . . . . . . . . . 109
14.8. Authorization . . . . . . . . . . . . . . . . . . . . . 109
14.9. Cache-Control . . . . . . . . . . . . . . . . . . . . . 110
14.9.1. What is Cacheable . . . . . . . . . . . . . . . . . 112
14.9.2. What May be Stored by Caches . . . . . . . . . . . . 113
14.9.3. Modifications of the Basic Expiration Mechanism . . 113
14.9.4. Cache Revalidation and Reload Controls . . . . . . . 115
14.9.5. No-Transform Directive . . . . . . . . . . . . . . . 118
14.9.6. Cache Control Extensions . . . . . . . . . . . . . . 119
14.10. Connection . . . . . . . . . . . . . . . . . . . . . . . 119
14.11. Content-Encoding . . . . . . . . . . . . . . . . . . . . 120
14.12. Content-Language . . . . . . . . . . . . . . . . . . . . 121
14.13. Content-Length . . . . . . . . . . . . . . . . . . . . . 122
14.14. Content-Location . . . . . . . . . . . . . . . . . . . . 123
14.15. Content-MD5 . . . . . . . . . . . . . . . . . . . . . . 123
14.16. Content-Range . . . . . . . . . . . . . . . . . . . . . 125
14.17. Content-Type . . . . . . . . . . . . . . . . . . . . . . 127
14.18. Date . . . . . . . . . . . . . . . . . . . . . . . . . . 127
14.18.1. Clockless Origin Server Operation . . . . . . . . . 128
14.19. ETag . . . . . . . . . . . . . . . . . . . . . . . . . . 128
14.20. Expect . . . . . . . . . . . . . . . . . . . . . . . . . 129
14.21. Expires . . . . . . . . . . . . . . . . . . . . . . . . 130
14.22. From . . . . . . . . . . . . . . . . . . . . . . . . . . 131
14.23. Host . . . . . . . . . . . . . . . . . . . . . . . . . . 131
14.24. If-Match . . . . . . . . . . . . . . . . . . . . . . . . 132
14.25. If-Modified-Since . . . . . . . . . . . . . . . . . . . 133
14.26. If-None-Match . . . . . . . . . . . . . . . . . . . . . 135
14.27. If-Range . . . . . . . . . . . . . . . . . . . . . . . . 136
14.28. If-Unmodified-Since . . . . . . . . . . . . . . . . . . 137
14.29. Last-Modified . . . . . . . . . . . . . . . . . . . . . 137
14.30. Location . . . . . . . . . . . . . . . . . . . . . . . . 138
14.31. Max-Forwards . . . . . . . . . . . . . . . . . . . . . . 138
14.32. Pragma . . . . . . . . . . . . . . . . . . . . . . . . . 139
14.33. Proxy-Authenticate . . . . . . . . . . . . . . . . . . . 140
14.34. Proxy-Authorization . . . . . . . . . . . . . . . . . . 140
14.35. Range . . . . . . . . . . . . . . . . . . . . . . . . . 140
14.35.1. Byte Ranges . . . . . . . . . . . . . . . . . . . . 140
14.35.2. Range Retrieval Requests . . . . . . . . . . . . . . 142
14.36. Referer . . . . . . . . . . . . . . . . . . . . . . . . 143
14.37. Retry-After . . . . . . . . . . . . . . . . . . . . . . 143
14.38. Server . . . . . . . . . . . . . . . . . . . . . . . . . 144
14.39. TE . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
14.40. Trailer . . . . . . . . . . . . . . . . . . . . . . . . 145
14.41. Transfer-Encoding . . . . . . . . . . . . . . . . . . . 146
14.42. Upgrade . . . . . . . . . . . . . . . . . . . . . . . . 146
14.43. User-Agent . . . . . . . . . . . . . . . . . . . . . . . 148
14.44. Vary . . . . . . . . . . . . . . . . . . . . . . . . . . 148
14.45. Via . . . . . . . . . . . . . . . . . . . . . . . . . . 149
14.46. Warning . . . . . . . . . . . . . . . . . . . . . . . . 150
14.47. WWW-Authenticate . . . . . . . . . . . . . . . . . . . . 153
15. Security Considerations . . . . . . . . . . . . . . . . . . . 153
15.1. Personal Information . . . . . . . . . . . . . . . . . . 153
15.1.1. Abuse of Server Log Information . . . . . . . . . . 154
15.1.2. Transfer of Sensitive Information . . . . . . . . . 154
15.1.3. Encoding Sensitive Information in URI's . . . . . . 155
15.1.4. Privacy Issues Connected to Accept Headers . . . . . 155
15.2. Attacks Based On File and Path Names . . . . . . . . . . 156
15.3. DNS Spoofing . . . . . . . . . . . . . . . . . . . . . . 156
15.4. Location Headers and Spoofing . . . . . . . . . . . . . 157
15.5. Content-Disposition Issues . . . . . . . . . . . . . . . 157
15.6. Authentication Credentials and Idle Clients . . . . . . 157
15.7. Proxies and Caching . . . . . . . . . . . . . . . . . . 158
15.7.1. Denial of Service Attacks on Proxies . . . . . . . . 159
16. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 159
17. References . . . . . . . . . . . . . . . . . . . . . . . . . 161
Appendix A. Appendices . . . . . . . . . . . . . . . . . . . . . 165
A.1. Internet Media Type message/http and application/http . 165
A.2. Internet Media Type multipart/byteranges . . . . . . . . 166
A.3. Tolerant Applications . . . . . . . . . . . . . . . . . 167
A.4. Differences Between HTTP Entities and RFC 2045
Entities . . . . . . . . . . . . . . . . . . . . . . . . 168
A.4.1. MIME-Version . . . . . . . . . . . . . . . . . . . . 169
A.4.2. Conversion to Canonical Form . . . . . . . . . . . . 169
A.4.3. Conversion of Date Formats . . . . . . . . . . . . . 169
A.4.4. Introduction of Content-Encoding . . . . . . . . . . 170
A.4.5. No Content-Transfer-Encoding . . . . . . . . . . . . 170
A.4.6. Introduction of Transfer-Encoding . . . . . . . . . 170
A.4.7. MHTML and Line Length Limitations . . . . . . . . . 171
A.5. Additional Features . . . . . . . . . . . . . . . . . . 171
A.5.1. Content-Disposition . . . . . . . . . . . . . . . . 171
A.6. Compatibility with Previous Versions . . . . . . . . . . 172
A.6.1. Changes from HTTP/1.0 . . . . . . . . . . . . . . . 173
A.6.2. Compatibility with HTTP/1.0 Persistent Connections . 174
A.6.3. Changes from RFC 2068 . . . . . . . . . . . . . . . 174
Appendix B. Index . . . . . . . . . . . . . . . . . . . . . . . 177
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 188
Intellectual Property and Copyright Statements . . . . . . . . . 190
1. Introduction 1. Introduction
This document will define aspects of HTTP related to overall network
operation, message framing, interaction with transport protocols, and
URI schemes. Right now it only includes the extracted relevant
sections of [RFC2616].
1.1. Purpose 1.1. Purpose
The Hypertext Transfer Protocol (HTTP) is an application-level The Hypertext Transfer Protocol (HTTP) is an application-level
protocol for distributed, collaborative, hypermedia information protocol for distributed, collaborative, hypermedia information
systems. HTTP has been in use by the World-Wide Web global systems. HTTP has been in use by the World-Wide Web global
information initiative since 1990. The first version of HTTP, information initiative since 1990. The first version of HTTP,
referred to as HTTP/0.9, was a simple protocol for raw data transfer referred to as HTTP/0.9, was a simple protocol for raw data transfer
across the Internet. HTTP/1.0, as defined by RFC 1945 [RFC1945], across the Internet. HTTP/1.0, as defined by RFC 1945 [RFC1945],
improved the protocol by allowing messages to be in the format of improved the protocol by allowing messages to be in the format of
MIME-like messages, containing metainformation about the data MIME-like messages, containing metainformation about the data
skipping to change at page 10, line 46 skipping to change at page 7, line 4
An HTTP response message, as defined in Section 6. An HTTP response message, as defined in Section 6.
resource resource
A network data object or service that can be identified by a URI, A network data object or service that can be identified by a URI,
as defined in Section 3.2. Resources may be available in multiple as defined in Section 3.2. Resources may be available in multiple
representations (e.g. multiple languages, data formats, size, and representations (e.g. multiple languages, data formats, size, and
resolutions) or vary in other ways. resolutions) or vary in other ways.
entity entity
The information transferred as the payload of a request or The information transferred as the payload of a request or
response. An entity consists of metainformation in the form of response. An entity consists of metainformation in the form of
entity-header fields and content in the form of an entity-body, as entity-header fields and content in the form of an entity-body, as
described in Section 7. described in Section 3 of [Part3].
representation representation
An entity included with a response that is subject to content An entity included with a response that is subject to content
negotiation, as described in Section 12. There may exist multiple negotiation, as described in Section 4 of [Part3]. There may
representations associated with a particular response status. exist multiple representations associated with a particular
response status.
content negotiation content negotiation
The mechanism for selecting the appropriate representation when The mechanism for selecting the appropriate representation when
servicing a request, as described in Section 12. The servicing a request, as described in Section 4 of [Part3]. The
representation of entities in any response can be negotiated representation of entities in any response can be negotiated
(including error responses). (including error responses).
variant variant
A resource may have one, or more than one, representation(s) A resource may have one, or more than one, representation(s)
associated with it at any given instant. Each of these associated with it at any given instant. Each of these
representations is termed a `varriant'. Use of the term `variant' representations is termed a `varriant'. Use of the term `variant'
does not necessarily imply that the resource is subject to content does not necessarily imply that the resource is subject to content
negotiation. negotiation.
skipping to change at page 12, line 43 skipping to change at page 9, line 4
cache cache
A program's local store of response messages and the subsystem A program's local store of response messages and the subsystem
that controls its message storage, retrieval, and deletion. A that controls its message storage, retrieval, and deletion. A
cache stores cacheable responses in order to reduce the response cache stores cacheable responses in order to reduce the response
time and network bandwidth consumption on future, equivalent time and network bandwidth consumption on future, equivalent
requests. Any client or server may include a cache, though a requests. Any client or server may include a cache, though a
cache cannot be used by a server that is acting as a tunnel. cache cannot be used by a server that is acting as a tunnel.
cacheable cacheable
A response is cacheable if a cache is allowed to store a copy of A response is cacheable if a cache is allowed to store a copy of
the response message for use in answering subsequent requests. the response message for use in answering subsequent requests.
The rules for determining the cacheability of HTTP responses are The rules for determining the cacheability of HTTP responses are
defined in Section 13. Even if a resource is cacheable, there may defined in Section 2 of [Part6]. Even if a resource is cacheable,
be additional constraints on whether a cache can use the cached there may be additional constraints on whether a cache can use the
copy for a particular request. cached copy for a particular request.
first-hand
A response is first-hand if it comes directly and without
unnecessary delay from the origin server, perhaps via one or more
proxies. A response is also first-hand if its validity has just
been checked directly with the origin server.
explicit expiration time
The time at which the origin server intends that an entity should
no longer be returned by a cache without further validation.
heuristic expiration time
An expiration time assigned by a cache when no explicit expiration
time is available.
age
The age of a response is the time since it was sent by, or
successfully validated with, the origin server.
freshness lifetime
The length of time between the generation of a response and its
expiration time.
fresh
A response is fresh if its age has not yet exceeded its freshness
lifetime.
stale
A response is stale if its age has passed its freshness lifetime.
semantically transparent
A cache behaves in a "semantically transparent" manner, with
respect to a particular response, when its use affects neither the
requesting client nor the origin server, except to improve
performance. When a cache is semantically transparent, the client
receives exactly the same response (except for hop-by-hop headers)
that it would have received had its request been handled directly
by the origin server.
validator
A protocol element (e.g., an entity tag or a Last-Modified time)
that is used to find out whether a cache entry is an equivalent
copy of an entity.
upstream/downstream upstream/downstream
Upstream and downstream describe the flow of a message: all Upstream and downstream describe the flow of a message: all
messages flow from upstream to downstream. messages flow from upstream to downstream.
inbound/outbound inbound/outbound
Inbound and outbound refer to the request and response paths for Inbound and outbound refer to the request and response paths for
messages: "inbound" means "traveling toward the origin server", messages: "inbound" means "traveling toward the origin server",
skipping to change at page 14, line 27 skipping to change at page 9, line 32
1.4. Overall Operation 1.4. Overall Operation
The HTTP protocol is a request/response protocol. A client sends a The HTTP protocol is a request/response protocol. A client sends a
request to the server in the form of a request method, URI, and request to the server in the form of a request method, URI, and
protocol version, followed by a MIME-like message containing request protocol version, followed by a MIME-like message containing request
modifiers, client information, and possible body content over a modifiers, client information, and possible body content over a
connection with a server. The server responds with a status line, connection with a server. The server responds with a status line,
including the message's protocol version and a success or error code, including the message's protocol version and a success or error code,
followed by a MIME-like message containing server information, entity followed by a MIME-like message containing server information, entity
metainformation, and possible entity-body content. The relationship metainformation, and possible entity-body content. The relationship
between HTTP and MIME is described in Appendix A.4. between HTTP and MIME is described in Appendix A of [Part3].
Most HTTP communication is initiated by a user agent and consists of Most HTTP communication is initiated by a user agent and consists of
a request to be applied to a resource on some origin server. In the a request to be applied to a resource on some origin server. In the
simplest case, this may be accomplished via a single connection (v) simplest case, this may be accomplished via a single connection (v)
between the user agent (UA) and the origin server (O). between the user agent (UA) and the origin server (O).
request chain ------------------------> request chain ------------------------>
UA -------------------v------------------- O UA -------------------v------------------- O
<----------------------- response chain <----------------------- response chain
skipping to change at page 15, line 36 skipping to change at page 10, line 40
cached copy of an earlier response from O (via C) for a request which cached copy of an earlier response from O (via C) for a request which
has not been cached by UA or A. has not been cached by UA or A.
request chain ----------> request chain ---------->
UA -----v----- A -----v----- B - - - - - - C - - - - - - O UA -----v----- A -----v----- B - - - - - - C - - - - - - O
<--------- response chain <--------- response chain
Not all responses are usefully cacheable, and some requests may Not all responses are usefully cacheable, and some requests may
contain modifiers which place special requirements on cache behavior. contain modifiers which place special requirements on cache behavior.
HTTP requirements for cache behavior and cacheable responses are HTTP requirements for cache behavior and cacheable responses are
defined in Section 13. defined in Section 2 of [Part6].
In fact, there are a wide variety of architectures and configurations In fact, there are a wide variety of architectures and configurations
of caches and proxies currently being experimented with or deployed of caches and proxies currently being experimented with or deployed
across the World Wide Web. These systems include national hierarchies across the World Wide Web. These systems include national hierarchies
of proxy caches to save transoceanic bandwidth, systems that of proxy caches to save transoceanic bandwidth, systems that
broadcast or multicast cache entries, organizations that distribute broadcast or multicast cache entries, organizations that distribute
subsets of cached data via CD-ROM, and so on. HTTP systems are used subsets of cached data via CD-ROM, and so on. HTTP systems are used
in corporate intranets over high-bandwidth links, and for access via in corporate intranets over high-bandwidth links, and for access via
PDAs with low-power radio links and intermittent connectivity. The PDAs with low-power radio links and intermittent connectivity. The
goal of HTTP/1.1 is to support the wide diversity of configurations goal of HTTP/1.1 is to support the wide diversity of configurations
skipping to change at page 16, line 15 skipping to change at page 11, line 20
does not preclude HTTP from being implemented on top of any other does not preclude HTTP from being implemented on top of any other
protocol on the Internet, or on other networks. HTTP only presumes a protocol on the Internet, or on other networks. HTTP only presumes a
reliable transport; any protocol that provides such guarantees can be reliable transport; any protocol that provides such guarantees can be
used; the mapping of the HTTP/1.1 request and response structures used; the mapping of the HTTP/1.1 request and response structures
onto the transport data units of the protocol in question is outside onto the transport data units of the protocol in question is outside
the scope of this specification. the scope of this specification.
In HTTP/1.0, most implementations used a new connection for each In HTTP/1.0, most implementations used a new connection for each
request/response exchange. In HTTP/1.1, a connection may be used for request/response exchange. In HTTP/1.1, a connection may be used for
one or more request/response exchanges, although connections may be one or more request/response exchanges, although connections may be
closed for a variety of reasons (see Section 8.1). closed for a variety of reasons (see Section 7.1).
2. Notational Conventions and Generic Grammar 2. Notational Conventions and Generic Grammar
2.1. Augmented BNF 2.1. Augmented BNF
All of the mechanisms specified in this document are described in All of the mechanisms specified in this document are described in
both prose and an augmented Backus-Naur Form (BNF) similar to that both prose and an augmented Backus-Naur Form (BNF) similar to that
used by RFC 822 [RFC822]. Implementors will need to be familiar with used by RFC 822 [RFC822]. Implementors will need to be familiar with
the notation in order to understand this specification. The the notation in order to understand this specification. The
augmented BNF includes the following constructs: augmented BNF includes the following constructs:
skipping to change at page 18, line 41 skipping to change at page 13, line 47
DIGIT = <any US-ASCII digit "0".."9"> DIGIT = <any US-ASCII digit "0".."9">
CTL = <any US-ASCII control character CTL = <any US-ASCII control character
(octets 0 - 31) and DEL (127)> (octets 0 - 31) and DEL (127)>
CR = <US-ASCII CR, carriage return (13)> CR = <US-ASCII CR, carriage return (13)>
LF = <US-ASCII LF, linefeed (10)> LF = <US-ASCII LF, linefeed (10)>
SP = <US-ASCII SP, space (32)> SP = <US-ASCII SP, space (32)>
HT = <US-ASCII HT, horizontal-tab (9)> HT = <US-ASCII HT, horizontal-tab (9)>
<"> = <US-ASCII double-quote mark (34)> <"> = <US-ASCII double-quote mark (34)>
HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all
protocol elements except the entity-body (see Appendix A.3 for protocol elements except the entity-body (see Appendix B for tolerant
tolerant applications). The end-of-line marker within an entity-body applications). The end-of-line marker within an entity-body is
is defined by its associated media type, as described in Section 3.7. defined by its associated media type, as described in [Part3].
CRLF = CR LF CRLF = CR LF
HTTP/1.1 header field values can be folded onto multiple lines if the HTTP/1.1 header field values can be folded onto multiple lines if the
continuation line begins with a space or horizontal tab. All linear continuation line begins with a space or horizontal tab. All linear
white space, including folding, has the same semantics as SP. A white space, including folding, has the same semantics as SP. A
recipient MAY replace any linear white space with a single SP before recipient MAY replace any linear white space with a single SP before
interpreting the field value or forwarding the message downstream. interpreting the field value or forwarding the message downstream.
LWS = [CRLF] 1*( SP | HT ) LWS = [CRLF] 1*( SP | HT )
The TEXT rule is only used for descriptive field contents and values The TEXT rule is only used for descriptive field contents and values
that are not intended to be interpreted by the message parser. Words that are not intended to be interpreted by the message parser. Words
skipping to change at page 19, line 28 skipping to change at page 14, line 33
replaced with a single SP before interpretation of the TEXT value. replaced with a single SP before interpretation of the TEXT value.
Hexadecimal numeric characters are used in several protocol elements. Hexadecimal numeric characters are used in several protocol elements.
HEX = "A" | "B" | "C" | "D" | "E" | "F" HEX = "A" | "B" | "C" | "D" | "E" | "F"
| "a" | "b" | "c" | "d" | "e" | "f" | DIGIT | "a" | "b" | "c" | "d" | "e" | "f" | DIGIT
Many HTTP/1.1 header field values consist of words separated by LWS Many HTTP/1.1 header field values consist of words separated by LWS
or special characters. These special characters MUST be in a quoted or special characters. These special characters MUST be in a quoted
string to be used within a parameter value (as defined in string to be used within a parameter value (as defined in
Section 3.6). Section 3.4).
token = 1*<any CHAR except CTLs or separators> token = 1*<any CHAR except CTLs or separators>
separators = "(" | ")" | "<" | ">" | "@" separators = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <"> | "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "=" | "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT | "{" | "}" | SP | HT
Comments can be included in some HTTP header fields by surrounding Comments can be included in some HTTP header fields by surrounding
the comment text with parentheses. Comments are only allowed in the comment text with parentheses. Comments are only allowed in
fields containing "comment" as part of their field value definition. fields containing "comment" as part of their field value definition.
skipping to change at page 21, line 44 skipping to change at page 16, line 50
(which replaces RFCs 1738 [RFC1738] and RFC 1808 [RFC1808]). This (which replaces RFCs 1738 [RFC1738] and RFC 1808 [RFC1808]). This
specification adopts the definitions of "URI-reference", specification adopts the definitions of "URI-reference",
"absoluteURI", "relativeURI", "port", "host","abs_path", "rel_path", "absoluteURI", "relativeURI", "port", "host","abs_path", "rel_path",
and "authority" from that specification. and "authority" from that specification.
The HTTP protocol does not place any a priori limit on the length of The HTTP protocol does not place any a priori limit on the length of
a URI. Servers MUST be able to handle the URI of any resource they a URI. Servers MUST be able to handle the URI of any resource they
serve, and SHOULD be able to handle URIs of unbounded length if they serve, and SHOULD be able to handle URIs of unbounded length if they
provide GET-based forms that could generate such URIs. A server provide GET-based forms that could generate such URIs. A server
SHOULD return 414 (Request-URI Too Long) status if a URI is longer SHOULD return 414 (Request-URI Too Long) status if a URI is longer
than the server can handle (see Section 10.4.15). than the server can handle (see Section 9.4.15 of [Part2]).
Note: Servers ought to be cautious about depending on URI lengths Note: Servers ought to be cautious about depending on URI lengths
above 255 bytes, because some older client or proxy above 255 bytes, because some older client or proxy
implementations might not properly support these lengths. implementations might not properly support these lengths.
3.2.2. http URL 3.2.2. http URL
The "http" scheme is used to locate network resources via the HTTP The "http" scheme is used to locate network resources via the HTTP
protocol. This section defines the scheme-specific syntax and protocol. This section defines the scheme-specific syntax and
semantics for http URLs. semantics for http URLs.
skipping to change at page 23, line 23 skipping to change at page 18, line 23
Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036 Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036
Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format
The first format is preferred as an Internet standard and represents The first format is preferred as an Internet standard and represents
a fixed-length subset of that defined by RFC 1123 [RFC1123] (an a fixed-length subset of that defined by RFC 1123 [RFC1123] (an
update to RFC 822 [RFC822]). The second format is in common use, but update to RFC 822 [RFC822]). The second format is in common use, but
is based on the obsolete RFC 850 [RFC1036] date format and lacks a is based on the obsolete RFC 850 [RFC1036] date format and lacks a
four-digit year. HTTP/1.1 clients and servers that parse the date four-digit year. HTTP/1.1 clients and servers that parse the date
value MUST accept all three formats (for compatibility with value MUST accept all three formats (for compatibility with
HTTP/1.0), though they MUST only generate the RFC 1123 format for HTTP/1.0), though they MUST only generate the RFC 1123 format for
representing HTTP-date values in header fields. See Appendix A.3 for representing HTTP-date values in header fields. See Appendix B for
further information. further information.
Note: Recipients of date values are encouraged to be robust in Note: Recipients of date values are encouraged to be robust in
accepting date values that may have been sent by non-HTTP accepting date values that may have been sent by non-HTTP
applications, as is sometimes the case when retrieving or posting applications, as is sometimes the case when retrieving or posting
messages via proxies/gateways to SMTP or NNTP. messages via proxies/gateways to SMTP or NNTP.
All HTTP date/time stamps MUST be represented in Greenwich Mean Time All HTTP date/time stamps MUST be represented in Greenwich Mean Time
(GMT), without exception. For the purposes of HTTP, GMT is exactly (GMT), without exception. For the purposes of HTTP, GMT is exactly
equal to UTC (Coordinated Universal Time). This is indicated in the equal to UTC (Coordinated Universal Time). This is indicated in the
skipping to change at page 24, line 30 skipping to change at page 19, line 30
| "Thursday" | "Friday" | "Saturday" | "Sunday" | "Thursday" | "Friday" | "Saturday" | "Sunday"
month = "Jan" | "Feb" | "Mar" | "Apr" month = "Jan" | "Feb" | "Mar" | "Apr"
| "May" | "Jun" | "Jul" | "Aug" | "May" | "Jun" | "Jul" | "Aug"
| "Sep" | "Oct" | "Nov" | "Dec" | "Sep" | "Oct" | "Nov" | "Dec"
Note: HTTP requirements for the date/time stamp format apply only to Note: HTTP requirements for the date/time stamp format apply only to
their usage within the protocol stream. Clients and servers are not their usage within the protocol stream. Clients and servers are not
required to use these formats for user presentation, request logging, required to use these formats for user presentation, request logging,
etc. etc.
3.3.2. Delta Seconds 3.4. Transfer Codings
Some HTTP header fields allow a time value to be specified as an
integer number of seconds, represented in decimal, after the time
that the message was received.
delta-seconds = 1*DIGIT
3.4. Character Sets
HTTP uses the same definition of the term "character set" as that
described for MIME:
The term "character set" is used in this document to refer to a
method used with one or more tables to convert a sequence of octets
into a sequence of characters. Note that unconditional conversion in
the other direction is not required, in that not all characters may
be available in a given character set and a character set may provide
more than one sequence of octets to represent a particular character.
This definition is intended to allow various kinds of character
encoding, from simple single-table mappings such as US-ASCII to
complex table switching methods such as those that use ISO-2022's
techniques. However, the definition associated with a MIME character
set name MUST fully specify the mapping to be performed from octets
to characters. In particular, use of external profiling information
to determine the exact mapping is not permitted.
Note: This use of the term "character set" is more commonly
referred to as a "character encoding." However, since HTTP and
MIME share the same registry, it is important that the terminology
also be shared.
HTTP character sets are identified by case-insensitive tokens. The
complete set of tokens is defined by the IANA Character Set registry
[RFC1700].
charset = token
Although HTTP allows an arbitrary token to be used as a charset
value, any token that has a predefined value within the IANA
Character Set registry [RFC1700] MUST represent the character set
defined by that registry. Applications SHOULD limit their use of
character sets to those defined by the IANA registry.
Implementors should be aware of IETF character set requirements
[RFC2279] [RFC2277].
3.4.1. Missing Charset
Some HTTP/1.0 software has interpreted a Content-Type header without
charset parameter incorrectly to mean "recipient should guess."
Senders wishing to defeat this behavior MAY include a charset
parameter even when the charset is ISO-8859-1 and SHOULD do so when
it is known that it will not confuse the recipient.
Unfortunately, some older HTTP/1.0 clients did not deal properly with
an explicit charset parameter. HTTP/1.1 recipients MUST respect the
charset label provided by the sender; and those user agents that have
a provision to "guess" a charset MUST use the charset from the
content-type field if they support that charset, rather than the
recipient's preference, when initially displaying a document. See
Section 3.7.1.
3.5. Content Codings
Content coding values indicate an encoding transformation that has
been or can be applied to an entity. Content codings are primarily
used to allow a document to be compressed or otherwise usefully
transformed without losing the identity of its underlying media type
and without loss of information. Frequently, the entity is stored in
coded form, transmitted directly, and only decoded by the recipient.
content-coding = token
All content-coding values are case-insensitive. HTTP/1.1 uses
content-coding values in the Accept-Encoding (Section 14.3) and
Content-Encoding (Section 14.11) header fields. Although the value
describes the content-coding, what is more important is that it
indicates what decoding mechanism will be required to remove the
encoding.
The Internet Assigned Numbers Authority (IANA) acts as a registry for
content-coding value tokens. Initially, the registry contains the
following tokens:
gzip
An encoding format produced by the file compression program "gzip"
(GNU zip) as described in RFC 1952 [RFC1952]. This format is a
Lempel-Ziv coding (LZ77) with a 32 bit CRC.
compress
The encoding format produced by the common UNIX file compression
program "compress". This format is an adaptive Lempel-Ziv-Welch
coding (LZW).
Use of program names for the identification of encoding formats is
not desirable and is discouraged for future encodings. Their use
here is representative of historical practice, not good design.
For compatibility with previous implementations of HTTP,
applications SHOULD consider "x-gzip" and "x-compress" to be
equivalent to "gzip" and "compress" respectively.
deflate
The "zlib" format defined in RFC 1950 [RFC1950] in combination
with the "deflate" compression mechanism described in RFC 1951
[RFC1951].
identity
The default (identity) encoding; the use of no transformation
whatsoever. This content-coding is used only in the Accept-
Encoding header, and SHOULD NOT be used in the Content-Encoding
header.
New content-coding value tokens SHOULD be registered; to allow
interoperability between clients and servers, specifications of the
content coding algorithms needed to implement a new value SHOULD be
publicly available and adequate for independent implementation, and
conform to the purpose of content coding defined in this section.
3.6. Transfer Codings
Transfer-coding values are used to indicate an encoding Transfer-coding values are used to indicate an encoding
transformation that has been, can be, or may need to be applied to an transformation that has been, can be, or may need to be applied to an
entity-body in order to ensure "safe transport" through the network. entity-body in order to ensure "safe transport" through the network.
This differs from a content coding in that the transfer-coding is a This differs from a content coding in that the transfer-coding is a
property of the message, not of the original entity. property of the message, not of the original entity.
transfer-coding = "chunked" | transfer-extension transfer-coding = "chunked" | transfer-extension
transfer-extension = token *( ";" parameter ) transfer-extension = token *( ";" parameter )
Parameters are in the form of attribute/value pairs. Parameters are in the form of attribute/value pairs.
parameter = attribute "=" value parameter = attribute "=" value
attribute = token attribute = token
value = token | quoted-string value = token | quoted-string
All transfer-coding values are case-insensitive. HTTP/1.1 uses All transfer-coding values are case-insensitive. HTTP/1.1 uses
transfer-coding values in the TE header field (Section 14.39) and in transfer-coding values in the TE header field (Section 8.5) and in
the Transfer-Encoding header field (Section 14.41). the Transfer-Encoding header field (Section 8.7).
Whenever a transfer-coding is applied to a message-body, the set of Whenever a transfer-coding is applied to a message-body, the set of
transfer-codings MUST include "chunked", unless the message is transfer-codings MUST include "chunked", unless the message is
terminated by closing the connection. When the "chunked" transfer- terminated by closing the connection. When the "chunked" transfer-
coding is used, it MUST be the last transfer-coding applied to the coding is used, it MUST be the last transfer-coding applied to the
message-body. The "chunked" transfer-coding MUST NOT be applied more message-body. The "chunked" transfer-coding MUST NOT be applied more
than once to a message-body. These rules allow the recipient to than once to a message-body. These rules allow the recipient to
determine the transfer-length of the message (Section 4.4). determine the transfer-length of the message (Section 4.4).
Transfer-codings are analogous to the Content-Transfer-Encoding Transfer-codings are analogous to the Content-Transfer-Encoding
values of MIME [RFC2045], which were designed to enable safe values of MIME [RFC2045], which were designed to enable safe
transport of binary data over a 7-bit transport service. However, transport of binary data over a 7-bit transport service. However,
safe transport has a different focus for an 8bit-clean transfer safe transport has a different focus for an 8bit-clean transfer
protocol. In HTTP, the only unsafe characteristic of message-bodies protocol. In HTTP, the only unsafe characteristic of message-bodies
is the difficulty in determining the exact body length is the difficulty in determining the exact body length (Section 4.4),
(Section 7.2.2), or the desire to encrypt data over a shared or the desire to encrypt data over a shared transport.
transport.
The Internet Assigned Numbers Authority (IANA) acts as a registry for The Internet Assigned Numbers Authority (IANA) acts as a registry for
transfer-coding value tokens. Initially, the registry contains the transfer-coding value tokens. Initially, the registry contains the
following tokens: "chunked" (Section 3.6.1), "identity" (section following tokens: "chunked" (Section 3.4.1), "identity" (section
3.6.2), "gzip" (Section 3.5), "compress" (Section 3.5), and "deflate" 3.6.2), "gzip" ([Part3]), "compress" ([Part3]), and "deflate"
(Section 3.5). ([Part3]).
New transfer-coding value tokens SHOULD be registered in the same way New transfer-coding value tokens SHOULD be registered in the same way
as new content-coding value tokens (Section 3.5). as new content-coding value tokens ([Part3]).
A server which receives an entity-body with a transfer-coding it does A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0 connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client. client.
3.6.1. Chunked Transfer Coding 3.4.1. Chunked Transfer Coding
The chunked encoding modifies the body of a message in order to The chunked encoding modifies the body of a message in order to
transfer it as a series of chunks, each with its own size indicator, transfer it as a series of chunks, each with its own size indicator,
followed by an OPTIONAL trailer containing entity-header fields. followed by an OPTIONAL trailer containing entity-header fields.
This allows dynamically produced content to be transferred along with This allows dynamically produced content to be transferred along with
the information necessary for the recipient to verify that it has the information necessary for the recipient to verify that it has
received the full message. received the full message.
Chunked-Body = *chunk Chunked-Body = *chunk
last-chunk last-chunk
skipping to change at page 28, line 43 skipping to change at page 21, line 28
chunk-data = chunk-size(OCTET) chunk-data = chunk-size(OCTET)
trailer = *(entity-header CRLF) trailer = *(entity-header CRLF)
The chunk-size field is a string of hex digits indicating the size of The chunk-size field is a string of hex digits indicating the size of
the chunk. The chunked encoding is ended by any chunk whose size is the chunk. The chunked encoding is ended by any chunk whose size is
zero, followed by the trailer, which is terminated by an empty line. zero, followed by the trailer, which is terminated by an empty line.
The trailer allows the sender to include additional HTTP header The trailer allows the sender to include additional HTTP header
fields at the end of the message. The Trailer header field can be fields at the end of the message. The Trailer header field can be
used to indicate which header fields are included in a trailer (see used to indicate which header fields are included in a trailer (see
Section 14.40). Section 8.6).
A server using chunked transfer-coding in a response MUST NOT use the A server using chunked transfer-coding in a response MUST NOT use the
trailer for any header fields unless at least one of the following is trailer for any header fields unless at least one of the following is
true: true:
1. the request included a TE header field that indicates "trailers" 1. the request included a TE header field that indicates "trailers"
is acceptable in the transfer-coding of the response, as is acceptable in the transfer-coding of the response, as
described in Section 14.39; or, described in Section 8.5; or,
2. the server is the origin server for the response, the trailer 2. the server is the origin server for the response, the trailer
fields consist entirely of optional metadata, and the recipient fields consist entirely of optional metadata, and the recipient
could use the message (in a manner acceptable to the origin could use the message (in a manner acceptable to the origin
server) without receiving this metadata. In other words, the server) without receiving this metadata. In other words, the
origin server is willing to accept the possibility that the origin server is willing to accept the possibility that the
trailer fields might be silently discarded along the path to the trailer fields might be silently discarded along the path to the
client. client.
This requirement prevents an interoperability failure when the This requirement prevents an interoperability failure when the
message is being received by an HTTP/1.1 (or later) proxy and message is being received by an HTTP/1.1 (or later) proxy and
forwarded to an HTTP/1.0 recipient. It avoids a situation where forwarded to an HTTP/1.0 recipient. It avoids a situation where
compliance with the protocol would have necessitated a possibly compliance with the protocol would have necessitated a possibly
infinite buffer on the proxy. infinite buffer on the proxy.
An example process for decoding a Chunked-Body is presented in A process for decoding the "chunked" transfer-coding can be
Appendix A.4.6. represented in pseudo-code as:
length := 0
read chunk-size, chunk-extension (if any) and CRLF
while (chunk-size > 0) {
read chunk-data and CRLF
append chunk-data to entity-body
length := length + chunk-size
read chunk-size and CRLF
}
read entity-header
while (entity-header not empty) {
append entity-header to existing header fields
read entity-header
}
Content-Length := length
Remove "chunked" from Transfer-Encoding
All HTTP/1.1 applications MUST be able to receive and decode the All HTTP/1.1 applications MUST be able to receive and decode the
"chunked" transfer-coding, and MUST ignore chunk-extension extensions "chunked" transfer-coding, and MUST ignore chunk-extension extensions
they do not understand. they do not understand.
3.7. Media Types
HTTP uses Internet Media Types [RFC1590] in the Content-Type
(Section 14.17) and Accept (Section 14.1) header fields in order to
provide open and extensible data typing and type negotiation.
media-type = type "/" subtype *( ";" parameter )
type = token
subtype = token
Parameters MAY follow the type/subtype in the form of attribute/value
pairs (as defined in Section 3.6).
The type, subtype, and parameter attribute names are case-
insensitive. Parameter values might or might not be case-sensitive,
depending on the semantics of the parameter name. Linear white space
(LWS) MUST NOT be used between the type and subtype, nor between an
attribute and its value. The presence or absence of a parameter
might be significant to the processing of a media-type, depending on
its definition within the media type registry.
Note that some older HTTP applications do not recognize media type
parameters. When sending data to older HTTP applications,
implementations SHOULD only use media type parameters when they are
required by that type/subtype definition.
Media-type values are registered with the Internet Assigned Number
Authority (IANA [RFC1700]). The media type registration process is
outlined in RFC 1590 [RFC1590]. Use of non-registered media types is
discouraged.
3.7.1. Canonicalization and Text Defaults
Internet media types are registered with a canonical form. An
entity-body transferred via HTTP messages MUST be represented in the
appropriate canonical form prior to its transmission except for
"text" types, as defined in the next paragraph.
When in canonical form, media subtypes of the "text" type use CRLF as
the text line break. HTTP relaxes this requirement and allows the
transport of text media with plain CR or LF alone representing a line
break when it is done consistently for an entire entity-body. HTTP
applications MUST accept CRLF, bare CR, and bare LF as being
representative of a line break in text media received via HTTP. In
addition, if the text is represented in a character set that does not
use octets 13 and 10 for CR and LF respectively, as is the case for
some multi-byte character sets, HTTP allows the use of whatever octet
sequences are defined by that character set to represent the
equivalent of CR and LF for line breaks. This flexibility regarding
line breaks applies only to text media in the entity-body; a bare CR
or LF MUST NOT be substituted for CRLF within any of the HTTP control
structures (such as header fields and multipart boundaries).
If an entity-body is encoded with a content-coding, the underlying
data MUST be in a form defined above prior to being encoded.
The "charset" parameter is used with some media types to define the
character set (Section 3.4) of the data. When no explicit charset
parameter is provided by the sender, media subtypes of the "text"
type are defined to have a default charset value of "ISO-8859-1" when
received via HTTP. Data in character sets other than "ISO-8859-1" or
its subsets MUST be labeled with an appropriate charset value. See
Section 3.4.1 for compatibility problems.
3.7.2. Multipart Types
MIME provides for a number of "multipart" types -- encapsulations of
one or more entities within a single message-body. All multipart
types share a common syntax, as defined in section 5.1.1 of RFC 2046
[RFC2046], and MUST include a boundary parameter as part of the media
type value. The message body is itself a protocol element and MUST
therefore use only CRLF to represent line breaks between body-parts.
Unlike in RFC 2046, the epilogue of any multipart message MUST be
empty; HTTP applications MUST NOT transmit the epilogue (even if the
original multipart contains an epilogue). These restrictions exist
in order to preserve the self-delimiting nature of a multipart
message-body, wherein the "end" of the message-body is indicated by
the ending multipart boundary.
In general, HTTP treats a multipart message-body no differently than
any other media type: strictly as payload. The one exception is the
"multipart/byteranges" type (Appendix A.2) when it appears in a 206
(Partial Content) response, which will be interpreted by some HTTP
caching mechanisms as described in sections 13.5.4 and 14.16. In all
other cases, an HTTP user agent SHOULD follow the same or similar
behavior as a MIME user agent would upon receipt of a multipart type.
The MIME header fields within each body-part of a multipart message-
body do not have any significance to HTTP beyond that defined by
their MIME semantics.
In general, an HTTP user agent SHOULD follow the same or similar
behavior as a MIME user agent would upon receipt of a multipart type.
If an application receives an unrecognized multipart subtype, the
application MUST treat it as being equivalent to "multipart/mixed".
Note: The "multipart/form-data" type has been specifically defined
for carrying form data suitable for processing via the POST
request method, as described in RFC 1867 [RFC1867].
3.8. Product Tokens
Product tokens are used to allow communicating applications to
identify themselves by software name and version. Most fields using
product tokens also allow sub-products which form a significant part
of the application to be listed, separated by white space. By
convention, the products are listed in order of their significance
for identifying the application.
product = token ["/" product-version]
product-version = token
Examples:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
Server: Apache/0.8.4
Product tokens SHOULD be short and to the point. They MUST NOT be
used for advertising or other non-essential information. Although
any token character MAY appear in a product-version, this token
SHOULD only be used for a version identifier (i.e., successive
versions of the same product SHOULD only differ in the product-
version portion of the product value).
3.9. Quality Values
HTTP content negotiation (Section 12) uses short "floating point"
numbers to indicate the relative importance ("weight") of various
negotiable parameters. A weight is normalized to a real number in
the range 0 through 1, where 0 is the minimum and 1 the maximum
value. If a parameter has a quality value of 0, then content with
this parameter is `not acceptable' for the client. HTTP/1.1
applications MUST NOT generate more than three digits after the
decimal point. User configuration of these values SHOULD also be
limited in this fashion.
qvalue = ( "0" [ "." 0*3DIGIT ] )
| ( "1" [ "." 0*3("0") ] )
"Quality values" is a misnomer, since these values merely represent
relative degradation in desired quality.
3.10. Language Tags
A language tag identifies a natural language spoken, written, or
otherwise conveyed by human beings for communication of information
to other human beings. Computer languages are explicitly excluded.
HTTP uses language tags within the Accept-Language and Content-
Language fields.
The syntax and registry of HTTP language tags is the same as that
defined by RFC 1766 [RFC1766]. In summary, a language tag is
composed of 1 or more parts: A primary language tag and a possibly
empty series of subtags:
language-tag = primary-tag *( "-" subtag )
primary-tag = 1*8ALPHA
subtag = 1*8ALPHA
White space is not allowed within the tag and all tags are case-
insensitive. The name space of language tags is administered by the
IANA. Example tags include:
en, en-US, en-cockney, i-cherokee, x-pig-latin
where any two-letter primary-tag is an ISO-639 language abbreviation
and any two-letter initial subtag is an ISO-3166 country code. (The
last three tags above are not registered tags; all but the last are
examples of tags which could be registered in future.)
3.11. Entity Tags
Entity tags are used for comparing two or more entities from the same
requested resource. HTTP/1.1 uses entity tags in the ETag
(Section 14.19), If-Match (Section 14.24), If-None-Match
(Section 14.26), and If-Range (Section 14.27) header fields. The
definition of how they are used and compared as cache validators is
in Section 13.3.3. An entity tag consists of an opaque quoted
string, possibly prefixed by a weakness indicator.
entity-tag = [ weak ] opaque-tag
weak = "W/"
opaque-tag = quoted-string
A "strong entity tag" MAY be shared by two entities of a resource
only if they are equivalent by octet equality.
A "weak entity tag," indicated by the "W/" prefix, MAY be shared by
two entities of a resource only if the entities are equivalent and
could be substituted for each other with no significant change in
semantics. A weak entity tag can only be used for weak comparison.
An entity tag MUST be unique across all versions of all entities
associated with a particular resource. A given entity tag value MAY
be used for entities obtained by requests on different URIs. The use
of the same entity tag value in conjunction with entities obtained by
requests on different URIs does not imply the equivalence of those
entities.
3.12. Range Units
HTTP/1.1 allows a client to request that only part (a range of) the
response entity be included within the response. HTTP/1.1 uses range
units in the Range (Section 14.35) and Content-Range (Section 14.16)
header fields. An entity can be broken down into subranges according
to various structural units.
range-unit = bytes-unit | other-range-unit
bytes-unit = "bytes"
other-range-unit = token
The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1
implementations MAY ignore ranges specified using other units.
HTTP/1.1 has been designed to allow implementations of applications
that do not depend on knowledge of ranges.
4. HTTP Message 4. HTTP Message
4.1. Message Types 4.1. Message Types
HTTP messages consist of requests from client to server and responses HTTP messages consist of requests from client to server and responses
from server to client. from server to client.
HTTP-message = Request | Response ; HTTP/1.1 messages HTTP-message = Request | Response ; HTTP/1.1 messages
Request (Section 5) and Response (Section 6) messages use the generic Request (Section 5) and Response (Section 6) messages use the generic
skipping to change at page 34, line 40 skipping to change at page 23, line 14
message and receives a CRLF first, it should ignore the CRLF. message and receives a CRLF first, it should ignore the CRLF.
Certain buggy HTTP/1.0 client implementations generate extra CRLF's Certain buggy HTTP/1.0 client implementations generate extra CRLF's
after a POST request. To restate what is explicitly forbidden by the after a POST request. To restate what is explicitly forbidden by the
BNF, an HTTP/1.1 client MUST NOT preface or follow a request with an BNF, an HTTP/1.1 client MUST NOT preface or follow a request with an
extra CRLF. extra CRLF.
4.2. Message Headers 4.2. Message Headers
HTTP header fields, which include general-header (Section 4.5), HTTP header fields, which include general-header (Section 4.5),
request-header (Section 5.3), response-header (Section 6.2), and request-header (Section 4 of [Part2]), response-header (Section 6 of
entity-header (Section 7.1) fields, follow the same generic format as [Part2]), and entity-header (Section 3.1 of [Part3]) fields, follow
that given in Section 3.1 of RFC 822 [RFC822]. Each header field the same generic format as that given in Section 3.1 of RFC 822
consists of a name followed by a colon (":") and the field value. [RFC822]. Each header field consists of a name followed by a colon
Field names are case-insensitive. The field value MAY be preceded by (":") and the field value. Field names are case-insensitive. The
any amount of LWS, though a single SP is preferred. Header fields field value MAY be preceded by any amount of LWS, though a single SP
can be extended over multiple lines by preceding each extra line with is preferred. Header fields can be extended over multiple lines by
at least one SP or HT. Applications ought to follow "common form", preceding each extra line with at least one SP or HT. Applications
where one is known or indicated, when generating HTTP constructs, ought to follow "common form", where one is known or indicated, when
since there might exist some implementations that fail to accept generating HTTP constructs, since there might exist some
anything beyond the common forms. implementations that fail to accept anything beyond the common forms.
message-header = field-name ":" [ field-value ] message-header = field-name ":" [ field-value ]
field-name = token field-name = token
field-value = *( field-content | LWS ) field-value = *( field-content | LWS )
field-content = <the OCTETs making up the field-value field-content = <the OCTETs making up the field-value
and consisting of either *TEXT or combinations and consisting of either *TEXT or combinations
of token, separators, and quoted-string> of token, separators, and quoted-string>
The field-content does not include any leading or trailing LWS: The field-content does not include any leading or trailing LWS:
linear white space occurring before the first non-whitespace linear white space occurring before the first non-whitespace
skipping to change at page 35, line 43 skipping to change at page 24, line 16
field-name are received is therefore significant to the field-name are received is therefore significant to the
interpretation of the combined field value, and thus a proxy MUST NOT interpretation of the combined field value, and thus a proxy MUST NOT
change the order of these field values when a message is forwarded. change the order of these field values when a message is forwarded.
4.3. Message Body 4.3. Message Body
The message-body (if any) of an HTTP message is used to carry the The message-body (if any) of an HTTP message is used to carry the
entity-body associated with the request or response. The message- entity-body associated with the request or response. The message-
body differs from the entity-body only when a transfer-coding has body differs from the entity-body only when a transfer-coding has
been applied, as indicated by the Transfer-Encoding header field been applied, as indicated by the Transfer-Encoding header field
(Section 14.41). (Section 8.7).
message-body = entity-body message-body = entity-body
| <entity-body encoded as per Transfer-Encoding> | <entity-body encoded as per Transfer-Encoding>
Transfer-Encoding MUST be used to indicate any transfer-codings Transfer-Encoding MUST be used to indicate any transfer-codings
applied by an application to ensure safe and proper transfer of the applied by an application to ensure safe and proper transfer of the
message. Transfer-Encoding is a property of the message, not of the message. Transfer-Encoding is a property of the message, not of the
entity, and thus MAY be added or removed by any application along the entity, and thus MAY be added or removed by any application along the
request/response chain. (However, Section 3.6 places restrictions on request/response chain. (However, Section 3.4 places restrictions on
when certain transfer-codings may be used.) when certain transfer-codings may be used.)
The rules for when a message-body is allowed in a message differ for The rules for when a message-body is allowed in a message differ for
requests and responses. requests and responses.
The presence of a message-body in a request is signaled by the The presence of a message-body in a request is signaled by the
inclusion of a Content-Length or Transfer-Encoding header field in inclusion of a Content-Length or Transfer-Encoding header field in
the request's message-headers. A message-body MUST NOT be included the request's message-headers. A message-body MUST NOT be included
in a request if the specification of the request method in a request if the specification of the request method (Section 3 of
(Section 5.1.1) does not allow sending an entity-body in requests. A [Part2]) does not allow sending an entity-body in requests. A server
server SHOULD read and forward a message-body on any request; if the SHOULD read and forward a message-body on any request; if the request
request method does not include defined semantics for an entity-body, method does not include defined semantics for an entity-body, then
then the message-body SHOULD be ignored when handling the request. the message-body SHOULD be ignored when handling the request.
For response messages, whether or not a message-body is included with For response messages, whether or not a message-body is included with
a message is dependent on both the request method and the response a message is dependent on both the request method and the response
status code (Section 6.1.1). All responses to the HEAD request status code (Section 6.1.1). All responses to the HEAD request
method MUST NOT include a message-body, even though the presence of method MUST NOT include a message-body, even though the presence of
entity-header fields might lead one to believe they do. All 1xx entity-header fields might lead one to believe they do. All 1xx
(informational), 204 (no content), and 304 (not modified) responses (informational), 204 (no content), and 304 (not modified) responses
MUST NOT include a message-body. All other responses do include a MUST NOT include a message-body. All other responses do include a
message-body, although it MAY be of zero length. message-body, although it MAY be of zero length.
skipping to change at page 36, line 41 skipping to change at page 25, line 19
been applied. When a message-body is included with a message, the been applied. When a message-body is included with a message, the
transfer-length of that body is determined by one of the following transfer-length of that body is determined by one of the following
(in order of precedence): (in order of precedence):
1. Any response message which "MUST NOT" include a message-body 1. Any response message which "MUST NOT" include a message-body
(such as the 1xx, 204, and 304 responses and any response to a (such as the 1xx, 204, and 304 responses and any response to a
HEAD request) is always terminated by the first empty line after HEAD request) is always terminated by the first empty line after
the header fields, regardless of the entity-header fields present the header fields, regardless of the entity-header fields present
in the message. in the message.
2. If a Transfer-Encoding header field (Section 14.41) is present 2. If a Transfer-Encoding header field (Section 8.7) is present and
and has any value other than "identity", then the transfer-length has any value other than "identity", then the transfer-length is
is defined by use of the "chunked" transfer-coding (Section 3.6), defined by use of the "chunked" transfer-coding (Section 3.4),
unless the message is terminated by closing the connection. unless the message is terminated by closing the connection.
3. If a Content-Length header field (Section 14.13) is present, its 3. If a Content-Length header field (Section 8.2) is present, its
decimal value in OCTETs represents both the entity-length and the decimal value in OCTETs represents both the entity-length and the
transfer-length. The Content-Length header field MUST NOT be transfer-length. The Content-Length header field MUST NOT be
sent if these two lengths are different (i.e., if a Transfer- sent if these two lengths are different (i.e., if a Transfer-
Encoding header field is present). If a message is received with Encoding header field is present). If a message is received with
both a Transfer-Encoding header field and a Content-Length header both a Transfer-Encoding header field and a Content-Length header
field, the latter MUST be ignored. field, the latter MUST be ignored.
4. If the message uses the media type "multipart/byteranges", and 4. If the message uses the media type "multipart/byteranges", and
the ransfer-length is not otherwise specified, then this self- the ransfer-length is not otherwise specified, then this self-
elimiting media type defines the transfer-length. This media elimiting media type defines the transfer-length. This media
skipping to change at page 37, line 33 skipping to change at page 26, line 10
For compatibility with HTTP/1.0 applications, HTTP/1.1 requests For compatibility with HTTP/1.0 applications, HTTP/1.1 requests
containing a message-body MUST include a valid Content-Length header containing a message-body MUST include a valid Content-Length header
field unless the server is known to be HTTP/1.1 compliant. If a field unless the server is known to be HTTP/1.1 compliant. If a
request contains a message-body and a Content-Length is not given, request contains a message-body and a Content-Length is not given,
the server SHOULD respond with 400 (bad request) if it cannot the server SHOULD respond with 400 (bad request) if it cannot
determine the length of the message, or with 411 (length required) if determine the length of the message, or with 411 (length required) if
it wishes to insist on receiving a valid Content-Length. it wishes to insist on receiving a valid Content-Length.
All HTTP/1.1 applications that receive entities MUST accept the All HTTP/1.1 applications that receive entities MUST accept the
"chunked" transfer-coding (Section 3.6), thus allowing this mechanism "chunked" transfer-coding (Section 3.4), thus allowing this mechanism
to be used for messages when the message length cannot be determined to be used for messages when the message length cannot be determined
in advance. in advance.
Messages MUST NOT include both a Content-Length header field and a Messages MUST NOT include both a Content-Length header field and a
non-identity transfer-coding. If the message does include a non- non-identity transfer-coding. If the message does include a non-
identity transfer-coding, the Content-Length MUST be ignored. identity transfer-coding, the Content-Length MUST be ignored.
When a Content-Length is given in a message where a message-body is When a Content-Length is given in a message where a message-body is
allowed, its field value MUST exactly match the number of OCTETs in allowed, its field value MUST exactly match the number of OCTETs in
the message-body. HTTP/1.1 user agents MUST notify the user when an the message-body. HTTP/1.1 user agents MUST notify the user when an
invalid length is received and detected. invalid length is received and detected.
4.5. General Header Fields 4.5. General Header Fields
There are a few header fields which have general applicability for There are a few header fields which have general applicability for
both request and response messages, but which do not apply to the both request and response messages, but which do not apply to the
entity being transferred. These header fields apply only to the entity being transferred. These header fields apply only to the
message being transmitted. message being transmitted.
general-header = Cache-Control ; Section 14.9 general-header = Cache-Control ; [Part6], Section 3.2
| Connection ; Section 14.10 | Connection ; Section 8.1
| Date ; Section 14.18 | Date ; Section 8.3
| Pragma ; Section 14.32 | Pragma ; [Part6], Section 3.4
| Trailer ; Section 14.40 | Trailer ; Section 8.6
| Transfer-Encoding ; Section 14.41 | Transfer-Encoding ; Section 8.7
| Upgrade ; Section 14.42 | Upgrade ; Section 8.8
| Via ; Section 14.45 | Via ; Section 8.9
| Warning ; Section 14.46 | Warning ; [Part6], Section 3.6
General-header field names can be extended reliably only in General-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or combination with a change in the protocol version. However, new or
experimental header fields may be given the semantics of general experimental header fields may be given the semantics of general
header fields if all parties in the communication recognize them to header fields if all parties in the communication recognize them to
be general-header fields. Unrecognized header fields are treated as be general-header fields. Unrecognized header fields are treated as
entity-header fields. entity-header fields.
5. Request 5. Request
A request message from a client to a server includes, within the A request message from a client to a server includes, within the
first line of that message, the method to be applied to the resource, first line of that message, the method to be applied to the resource,
the identifier of the resource, and the protocol version in use. the identifier of the resource, and the protocol version in use.
Request = Request-Line ; Section 5.1 Request = Request-Line ; Section 5.1
*(( general-header ; Section 4.5 *(( general-header ; Section 4.5
| request-header ; Section 5.3 | request-header ; [Part2], Section 4
| entity-header ) CRLF) ; Section 7.1 | entity-header ) CRLF) ; [Part3], Section 3.1
CRLF CRLF
[ message-body ] ; Section 4.3 [ message-body ] ; Section 4.3
5.1. Request-Line 5.1. Request-Line
The Request-Line begins with a method token, followed by the Request- The Request-Line begins with a method token, followed by the Request-
URI and the protocol version, and ending with CRLF. The elements are URI and the protocol version, and ending with CRLF. The elements are
separated by SP characters. No CR or LF is allowed except in the separated by SP characters. No CR or LF is allowed except in the
final CRLF sequence. final CRLF sequence.
Request-Line = Method SP Request-URI SP HTTP-Version CRLF Request-Line = Method SP Request-URI SP HTTP-Version CRLF
5.1.1. Method 5.1.1. Method
The Method token indicates the method to be performed on the resource The Method token indicates the method to be performed on the resource
identified by the Request-URI. The method is case-sensitive. identified by the Request-URI. The method is case-sensitive.
Method = "OPTIONS" ; Section 9.2 Method = token
| "GET" ; Section 9.3
| "HEAD" ; Section 9.4
| "POST" ; Section 9.5
| "PUT" ; Section 9.6
| "DELETE" ; Section 9.7
| "TRACE" ; Section 9.8
| "CONNECT" ; Section 9.9
| extension-method
extension-method = token
The list of methods allowed by a resource can be specified in an
Allow header field (Section 14.7). The return code of the response
always notifies the client whether a method is currently allowed on a
resource, since the set of allowed methods can change dynamically.
An origin server SHOULD return the status code 405 (Method Not
Allowed) if the method is known by the origin server but not allowed
for the requested resource, and 501 (Not Implemented) if the method
is unrecognized or not implemented by the origin server. The methods
GET and HEAD MUST be supported by all general-purpose servers. All
other methods are OPTIONAL; however, if the above methods are
implemented, they MUST be implemented with the same semantics as
those specified in Section 9.
5.1.2. Request-URI 5.1.2. Request-URI
The Request-URI is a Uniform Resource Identifier (Section 3.2) and The Request-URI is a Uniform Resource Identifier (Section 3.2) and
identifies the resource upon which to apply the request. identifies the resource upon which to apply the request.
Request-URI = "*" | absoluteURI | abs_path | authority Request-URI = "*" | absoluteURI | abs_path | authority
The four options for Request-URI are dependent on the nature of the The four options for Request-URI are dependent on the nature of the
request. The asterisk "*" means that the request does not apply to a request. The asterisk "*" means that the request does not apply to a
skipping to change at page 40, line 12 skipping to change at page 28, line 12
any aliases, local variations, and the numeric IP address. An any aliases, local variations, and the numeric IP address. An
example Request-Line would be: example Request-Line would be:
GET http://www.w3.org/pub/WWW/TheProject.html HTTP/1.1 GET http://www.w3.org/pub/WWW/TheProject.html HTTP/1.1
To allow for transition to absoluteURIs in all requests in future To allow for transition to absoluteURIs in all requests in future
versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI
form in requests, even though HTTP/1.1 clients will only generate form in requests, even though HTTP/1.1 clients will only generate
them in requests to proxies. them in requests to proxies.
The authority form is only used by the CONNECT method (Section 9.9). The authority form is only used by the CONNECT method (Section 8.9 of
[Part2]).
The most common form of Request-URI is that used to identify a The most common form of Request-URI is that used to identify a
resource on an origin server or gateway. In this case the absolute resource on an origin server or gateway. In this case the absolute
path of the URI MUST be transmitted (see Section 3.2.1, abs_path) as path of the URI MUST be transmitted (see Section 3.2.1, abs_path) as
the Request-URI, and the network location of the URI (authority) MUST the Request-URI, and the network location of the URI (authority) MUST
be transmitted in a Host header field. For example, a client wishing be transmitted in a Host header field. For example, a client wishing
to retrieve the resource above directly from the origin server would to retrieve the resource above directly from the origin server would
create a TCP connection to port 80 of the host "www.w3.org" and send create a TCP connection to port 80 of the host "www.w3.org" and send
the lines: the lines:
skipping to change at page 41, line 5 skipping to change at page 29, line 6
rewrite the Request-URI. rewrite the Request-URI.
5.2. The Resource Identified by a Request 5.2. The Resource Identified by a Request
The exact resource identified by an Internet request is determined by The exact resource identified by an Internet request is determined by
examining both the Request-URI and the Host header field. examining both the Request-URI and the Host header field.
An origin server that does not allow resources to differ by the An origin server that does not allow resources to differ by the
requested host MAY ignore the Host header field value when requested host MAY ignore the Host header field value when
determining the resource identified by an HTTP/1.1 request. (But see determining the resource identified by an HTTP/1.1 request. (But see
Appendix A.6.1.1 for other requirements on Host support in HTTP/1.1.) Appendix D.1.1 for other requirements on Host support in HTTP/1.1.)
An origin server that does differentiate resources based on the host An origin server that does differentiate resources based on the host
requested (sometimes referred to as virtual hosts or vanity host requested (sometimes referred to as virtual hosts or vanity host
names) MUST use the following rules for determining the requested names) MUST use the following rules for determining the requested
resource on an HTTP/1.1 request: resource on an HTTP/1.1 request:
1. If Request-URI is an absoluteURI, the host is part of the 1. If Request-URI is an absoluteURI, the host is part of the
Request-URI. Any Host header field value in the request MUST be Request-URI. Any Host header field value in the request MUST be
ignored. ignored.
skipping to change at page 41, line 29 skipping to change at page 29, line 30
3. If the host as determined by rule 1 or 2 is not a valid host on 3. If the host as determined by rule 1 or 2 is not a valid host on
the server, the response MUST be a 400 (Bad Request) error the server, the response MUST be a 400 (Bad Request) error
message. message.
Recipients of an HTTP/1.0 request that lacks a Host header field MAY Recipients of an HTTP/1.0 request that lacks a Host header field MAY
attempt to use heuristics (e.g., examination of the URI path for attempt to use heuristics (e.g., examination of the URI path for
something unique to a particular host) in order to determine what something unique to a particular host) in order to determine what
exact resource is being requested. exact resource is being requested.
5.3. Request Header Fields
The request-header fields allow the client to pass additional
information about the request, and about the client itself, to the
server. These fields act as request modifiers, with semantics
equivalent to the parameters on a programming language method
invocation.
request-header = Accept ; Section 14.1
| Accept-Charset ; Section 14.2
| Accept-Encoding ; Section 14.3
| Accept-Language ; Section 14.4
| Authorization ; Section 14.8
| Expect ; Section 14.20
| From ; Section 14.22
| Host ; Section 14.23
| If-Match ; Section 14.24
| If-Modified-Since ; Section 14.25
| If-None-Match ; Section 14.26
| If-Range ; Section 14.27
| If-Unmodified-Since ; Section 14.28
| Max-Forwards ; Section 14.31
| Proxy-Authorization ; Section 14.34
| Range ; Section 14.35
| Referer ; Section 14.36
| TE ; Section 14.39
| User-Agent ; Section 14.43
Request-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or
experimental header fields MAY be given the semantics of request-
header fields if all parties in the communication recognize them to
be request-header fields. Unrecognized header fields are treated as
entity-header fields.
6. Response 6. Response
After receiving and interpreting a request message, a server responds After receiving and interpreting a request message, a server responds
with an HTTP response message. with an HTTP response message.
Response = Status-Line ; Section 6.1 Response = Status-Line ; Section 6.1
*(( general-header ; Section 4.5 *(( general-header ; Section 4.5
| response-header ; Section 6.2 | response-header ; [Part2], Section 6
| entity-header ) CRLF) ; Section 7.1 | entity-header ) CRLF) ; [Part3], Section 3.1
CRLF CRLF
[ message-body ] ; Section 7.2 [ message-body ] ; Section 4.3
6.1. Status-Line 6.1. Status-Line
The first line of a Response message is the Status-Line, consisting The first line of a Response message is the Status-Line, consisting
of the protocol version followed by a numeric status code and its of the protocol version followed by a numeric status code and its
associated textual phrase, with each element separated by SP associated textual phrase, with each element separated by SP
characters. No CR or LF is allowed except in the final CRLF characters. No CR or LF is allowed except in the final CRLF
sequence. sequence.
Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF
6.1.1. Status Code and Reason Phrase 6.1.1. Status Code and Reason Phrase
The Status-Code element is a 3-digit integer result code of the The Status-Code element is a 3-digit integer result code of the
attempt to understand and satisfy the request. These codes are fully attempt to understand and satisfy the request. These codes are fully
defined in Section 10. The Reason-Phrase is intended to give a short defined in Section 9 of [Part2]. The Reason-Phrase is intended to
textual description of the Status-Code. The Status-Code is intended give a short textual description of the Status-Code. The Status-Code
for use by automata and the Reason-Phrase is intended for the human is intended for use by automata and the Reason-Phrase is intended for
user. The client is not required to examine or display the Reason- the human user. The client is not required to examine or display the
Phrase. Reason-Phrase.
The first digit of the Status-Code defines the class of response. The first digit of the Status-Code defines the class of response.
The last two digits do not have any categorization role. There are 5 The last two digits do not have any categorization role. There are 5
values for the first digit: values for the first digit:
o 1xx: Informational - Request received, continuing process o 1xx: Informational - Request received, continuing process
o 2xx: Success - The action was successfully received, understood, o 2xx: Success - The action was successfully received, understood,
and accepted and accepted
o 3xx: Redirection - Further action must be taken in order to o 3xx: Redirection - Further action must be taken in order to
complete the request complete the request
o 4xx: Client Error - The request contains bad syntax or cannot be o 4xx: Client Error - The request contains bad syntax or cannot be
fulfilled fulfilled
o 5xx: Server Error - The server failed to fulfill an apparently o 5xx: Server Error - The server failed to fulfill an apparently
valid request valid request
The individual values of the numeric status codes defined for Status-Code = 3DIGIT
HTTP/1.1, and an example set of corresponding Reason-Phrase's, are
presented below. The reason phrases listed here are only
recommendations -- they MAY be replaced by local equivalents without
affecting the protocol.
Status-Code =
"100" ; Section 10.1.1: Continue
| "101" ; Section 10.1.2: Switching Protocols
| "200" ; Section 10.2.1: OK
| "201" ; Section 10.2.2: Created
| "202" ; Section 10.2.3: Accepted
| "203" ; Section 10.2.4: Non-Authoritative Information
| "204" ; Section 10.2.5: No Content
| "205" ; Section 10.2.6: Reset Content
| "206" ; Section 10.2.7: Partial Content
| "300" ; Section 10.3.1: Multiple Choices
| "301" ; Section 10.3.2: Moved Permanently
| "302" ; Section 10.3.3: Found
| "303" ; Section 10.3.4: See Other
| "304" ; Section 10.3.5: Not Modified
| "305" ; Section 10.3.6: Use Proxy
| "307" ; Section 10.3.8: Temporary Redirect
| "400" ; Section 10.4.1: Bad Request
| "401" ; Section 10.4.2: Unauthorized
| "402" ; Section 10.4.3: Payment Required
| "403" ; Section 10.4.4: Forbidden
| "404" ; Section 10.4.5: Not Found
| "405" ; Section 10.4.6: Method Not Allowed
| "406" ; Section 10.4.7: Not Acceptable
| "407" ; Section 10.4.8: Proxy Authentication Required
| "408" ; Section 10.4.9: Request Time-out
| "409" ; Section 10.4.10: Conflict
| "410" ; Section 10.4.11: Gone
| "411" ; Section 10.4.12: Length Required
| "412" ; Section 10.4.13: Precondition Failed
| "413" ; Section 10.4.14: Request Entity Too Large
| "414" ; Section 10.4.15: Request-URI Too Large
| "415" ; Section 10.4.16: Unsupported Media Type
| "416" ; Section 10.4.17: Requested range not satisfiable
| "417" ; Section 10.4.18: Expectation Failed
| "500" ; Section 10.5.1: Internal Server Error
| "501" ; Section 10.5.2: Not Implemented
| "502" ; Section 10.5.3: Bad Gateway
| "503" ; Section 10.5.4: Service Unavailable
| "504" ; Section 10.5.5: Gateway Time-out
| "505" ; Section 10.5.6: HTTP Version not supported
| extension-code
extension-code = 3DIGIT
Reason-Phrase = *<TEXT, excluding CR, LF> Reason-Phrase = *<TEXT, excluding CR, LF>
HTTP status codes are extensible. HTTP applications are not required 7. Connections
to understand the meaning of all registered status codes, though such
understanding is obviously desirable. However, applications MUST
understand the class of any status code, as indicated by the first
digit, and treat any unrecognized response as being equivalent to the
x00 status code of that class, with the exception that an
unrecognized response MUST NOT be cached. For example, if an
unrecognized status code of 431 is received by the client, it can
safely assume that there was something wrong with its request and
treat the response as if it had received a 400 status code. In such
cases, user agents SHOULD present to the user the entity returned
with the response, since that entity is likely to include human-
readable information which will explain the unusual status.
6.2. Response Header Fields
The response-header fields allow the server to pass additional
information about the response which cannot be placed in the Status-
Line. These header fields give information about the server and
about further access to the resource identified by the Request-URI.
response-header = Accept-Ranges ; Section 14.5
| Age ; Section 14.6
| ETag ; Section 14.19
| Location ; Section 14.30
| Proxy-Authenticate ; Section 14.33
| Retry-After ; Section 14.37
| Server ; Section 14.38
| Vary ; Section 14.44
| WWW-Authenticate ; Section 14.47
Response-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or
experimental header fields MAY be given the semantics of response-
header fields if all parties in the communication recognize them to
be response-header fields. Unrecognized header fields are treated as
entity-header fields.
7. Entity
Request and Response messages MAY transfer an entity if not otherwise
restricted by the request method or response status code. An entity
consists of entity-header fields and an entity-body, although some
responses will only include the entity-headers.
In this section, both sender and recipient refer to either the client
or the server, depending on who sends and who receives the entity.
7.1. Entity Header Fields
Entity-header fields define metainformation about the entity-body or,
if no body is present, about the resource identified by the request.
Some of this metainformation is OPTIONAL; some might be REQUIRED by
portions of this specification.
entity-header = Allow ; Section 14.7
| Content-Encoding ; Section 14.11
| Content-Language ; Section 14.12
| Content-Length ; Section 14.13
| Content-Location ; Section 14.14
| Content-MD5 ; Section 14.15
| Content-Range ; Section 14.16
| Content-Type ; Section 14.17
| Expires ; Section 14.21
| Last-Modified ; Section 14.29
| extension-header
extension-header = message-header
The extension-header mechanism allows additional entity-header fields
to be defined without changing the protocol, but these fields cannot
be assumed to be recognizable by the recipient. Unrecognized header
fields SHOULD be ignored by the recipient and MUST be forwarded by
transparent proxies.
7.2. Entity Body
The entity-body (if any) sent with an HTTP request or response is in
a format and encoding defined by the entity-header fields.
entity-body = *OCTET
An entity-body is only present in a message when a message-body is
present, as described in Section 4.3. The entity-body is obtained
from the message-body by decoding any Transfer-Encoding that might
have been applied to ensure safe and proper transfer of the message.
7.2.1. Type
When an entity-body is included with a message, the data type of that
body is determined via the header fields Content-Type and Content-
Encoding. These define a two-layer, ordered encoding model:
entity-body := Content-Encoding( Content-Type( data ) )
Content-Type specifies the media type of the underlying data.
Content-Encoding may be used to indicate any additional content
codings applied to the data, usually for the purpose of data
compression, that are a property of the requested resource. There is
no default encoding.
Any HTTP/1.1 message containing an entity-body SHOULD include a
Content-Type header field defining the media type of that body. If
and only if the media type is not given by a Content-Type field, the
recipient MAY attempt to guess the media type via inspection of its
content and/or the name extension(s) of the URI used to identify the
resource. If the media type remains unknown, the recipient SHOULD
treat it as type "application/octet-stream".
7.2.2. Entity Length
The entity-length of a message is the length of the message-body
before any transfer-codings have been applied. Section 4.4 defines
how the transfer-length of a message-body is determined.
8. Connections
8.1. Persistent Connections 7.1. Persistent Connections
8.1.1. Purpose 7.1.1. Purpose
Prior to persistent connections, a separate TCP connection was Prior to persistent connections, a separate TCP connection was
established to fetch each URL, increasing the load on HTTP servers established to fetch each URL, increasing the load on HTTP servers
and causing congestion on the Internet. The use of inline images and and causing congestion on the Internet. The use of inline images and
other associated data often require a client to make multiple other associated data often require a client to make multiple
requests of the same server in a short amount of time. Analysis of requests of the same server in a short amount of time. Analysis of
these performance problems and results from a prototype these performance problems and results from a prototype
implementation are available [Pad1995] [Spe]. Implementation implementation are available [Pad1995] [Spe]. Implementation
experience and measurements of actual HTTP/1.1 (RFC 2068) experience and measurements of actual HTTP/1.1 (RFC 2068)
implementations show good results [Nie1997]. Alternatives have also implementations show good results [Nie1997]. Alternatives have also
skipping to change at page 48, line 20 skipping to change at page 31, line 33
spent in TCP's connection opening handshake. spent in TCP's connection opening handshake.
o HTTP can evolve more gracefully, since errors can be reported o HTTP can evolve more gracefully, since errors can be reported
without the penalty of closing the TCP connection. Clients using without the penalty of closing the TCP connection. Clients using
future versions of HTTP might optimistically try a new feature, future versions of HTTP might optimistically try a new feature,
but if communicating with an older server, retry with old but if communicating with an older server, retry with old
semantics after an error is reported. semantics after an error is reported.
HTTP implementations SHOULD implement persistent connections. HTTP implementations SHOULD implement persistent connections.
8.1.2. Overall Operation 7.1.2. Overall Operation
A significant difference between HTTP/1.1 and earlier versions of A significant difference between HTTP/1.1 and earlier versions of
HTTP is that persistent connections are the default behavior of any HTTP is that persistent connections are the default behavior of any
HTTP connection. That is, unless otherwise indicated, the client HTTP connection. That is, unless otherwise indicated, the client
SHOULD assume that the server will maintain a persistent connection, SHOULD assume that the server will maintain a persistent connection,
even after error responses from the server. even after error responses from the server.
Persistent connections provide a mechanism by which a client and a Persistent connections provide a mechanism by which a client and a
server can signal the close of a TCP connection. This signaling server can signal the close of a TCP connection. This signaling
takes place using the Connection header field (Section 14.10). Once takes place using the Connection header field (Section 8.1). Once a
a close has been signaled, the client MUST NOT send any more requests close has been signaled, the client MUST NOT send any more requests
on that connection. on that connection.
8.1.2.1. Negotiation 7.1.2.1. Negotiation
An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to
maintain a persistent connection unless a Connection header including maintain a persistent connection unless a Connection header including
the connection-token "close" was sent in the request. If the server the connection-token "close" was sent in the request. If the server
chooses to close the connection immediately after sending the chooses to close the connection immediately after sending the
response, it SHOULD send a Connection header including the response, it SHOULD send a Connection header including the
connection-token close. connection-token close.
An HTTP/1.1 client MAY expect a connection to remain open, but would An HTTP/1.1 client MAY expect a connection to remain open, but would
decide to keep it open based on whether the response from a server decide to keep it open based on whether the response from a server
skipping to change at page 49, line 7 skipping to change at page 32, line 21
case the client does not want to maintain a connection for more than case the client does not want to maintain a connection for more than
that request, it SHOULD send a Connection header including the that request, it SHOULD send a Connection header including the
connection-token close. connection-token close.
If either the client or the server sends the close token in the If either the client or the server sends the close token in the
Connection header, that request becomes the last one for the Connection header, that request becomes the last one for the
connection. connection.
Clients and servers SHOULD NOT assume that a persistent connection is Clients and servers SHOULD NOT assume that a persistent connection is
maintained for HTTP versions less than 1.1 unless it is explicitly maintained for HTTP versions less than 1.1 unless it is explicitly
signaled. See Appendix A.6.2 for more information on backward signaled. See Appendix D.2 for more information on backward
compatibility with HTTP/1.0 clients. compatibility with HTTP/1.0 clients.
In order to remain persistent, all messages on the connection MUST In order to remain persistent, all messages on the connection MUST
have a self-defined message length (i.e., one not defined by closure have a self-defined message length (i.e., one not defined by closure
of the connection), as described in Section 4.4. of the connection), as described in Section 4.4.
8.1.2.2. Pipelining 7.1.2.2. Pipelining
A client that supports persistent connections MAY "pipeline" its A client that supports persistent connections MAY "pipeline" its
requests (i.e., send multiple requests without waiting for each requests (i.e., send multiple requests without waiting for each
response). A server MUST send its responses to those requests in the response). A server MUST send its responses to those requests in the
same order that the requests were received. same order that the requests were received.
Clients which assume persistent connections and pipeline immediately Clients which assume persistent connections and pipeline immediately
after connection establishment SHOULD be prepared to retry their after connection establishment SHOULD be prepared to retry their
connection if the first pipelined attempt fails. If a client does connection if the first pipelined attempt fails. If a client does
such a retry, it MUST NOT pipeline before it knows the connection is such a retry, it MUST NOT pipeline before it knows the connection is
persistent. Clients MUST also be prepared to resend their requests persistent. Clients MUST also be prepared to resend their requests
if the server closes the connection before sending all of the if the server closes the connection before sending all of the
corresponding responses. corresponding responses.
Clients SHOULD NOT pipeline requests using non-idempotent methods or Clients SHOULD NOT pipeline requests using non-idempotent methods or
non-idempotent sequences of methods (see Section 9.1.2). Otherwise, non-idempotent sequences of methods (see Section 8.1.2 of [Part2]).
a premature termination of the transport connection could lead to Otherwise, a premature termination of the transport connection could
indeterminate results. A client wishing to send a non-idempotent lead to indeterminate results. A client wishing to send a non-
request SHOULD wait to send that request until it has received the idempotent request SHOULD wait to send that request until it has
response status for the previous request. received the response status for the previous request.
8.1.3. Proxy Servers 7.1.3. Proxy Servers
It is especially important that proxies correctly implement the It is especially important that proxies correctly implement the
properties of the Connection header field as specified in properties of the Connection header field as specified in
Section 14.10. Section 8.1.
The proxy server MUST signal persistent connections separately with The proxy server MUST signal persistent connections separately with
its clients and the origin servers (or other proxy servers) that it its clients and the origin servers (or other proxy servers) that it
connects to. Each persistent connection applies to only one connects to. Each persistent connection applies to only one
transport link. transport link.
A proxy server MUST NOT establish a HTTP/1.1 persistent connection A proxy server MUST NOT establish a HTTP/1.1 persistent connection
with an HTTP/1.0 client (but see RFC 2068 [RFC2068] for information with an HTTP/1.0 client (but see RFC 2068 [RFC2068] for information
and discussion of the problems with the Keep-Alive header implemented and discussion of the problems with the Keep-Alive header implemented
by many HTTP/1.0 clients). by many HTTP/1.0 clients).
8.1.4. Practical Considerations 7.1.4. Practical Considerations
Servers will usually have some time-out value beyond which they will Servers will usually have some time-out value beyond which they will
no longer maintain an inactive connection. Proxy servers might make no longer maintain an inactive connection. Proxy servers might make
this a higher value since it is likely that the client will be making this a higher value since it is likely that the client will be making
more connections through the same server. The use of persistent more connections through the same server. The use of persistent
connections places no requirements on the length (or existence) of connections places no requirements on the length (or existence) of
this time-out for either the client or the server. this time-out for either the client or the server.
When a client or server wishes to time-out it SHOULD issue a graceful When a client or server wishes to time-out it SHOULD issue a graceful
close on the transport connection. Clients and servers SHOULD both close on the transport connection. Clients and servers SHOULD both
skipping to change at page 50, line 32 skipping to change at page 33, line 48
time. For example, a client might have started to send a new request time. For example, a client might have started to send a new request
at the same time that the server has decided to close the "idle" at the same time that the server has decided to close the "idle"
connection. From the server's point of view, the connection is being connection. From the server's point of view, the connection is being
closed while it was idle, but from the client's point of view, a closed while it was idle, but from the client's point of view, a
request is in progress. request is in progress.
This means that clients, servers, and proxies MUST be able to recover This means that clients, servers, and proxies MUST be able to recover
from asynchronous close events. Client software SHOULD reopen the from asynchronous close events. Client software SHOULD reopen the
transport connection and retransmit the aborted sequence of requests transport connection and retransmit the aborted sequence of requests
without user interaction so long as the request sequence is without user interaction so long as the request sequence is
idempotent (see Section 9.1.2). Non-idempotent methods or sequences idempotent (see Section 8.1.2 of [Part2]). Non-idempotent methods or
MUST NOT be automatically retried, although user agents MAY offer a sequences MUST NOT be automatically retried, although user agents MAY
human operator the choice of retrying the request(s). Confirmation offer a human operator the choice of retrying the request(s).
by user-agent software with semantic understanding of the application Confirmation by user-agent software with semantic understanding of
MAY substitute for user confirmation. The automatic retry SHOULD NOT the application MAY substitute for user confirmation. The automatic
be repeated if the second sequence of requests fails. retry SHOULD NOT be repeated if the second sequence of requests
fails.
Servers SHOULD always respond to at least one request per connection, Servers SHOULD always respond to at least one request per connection,
if at all possible. Servers SHOULD NOT close a connection in the if at all possible. Servers SHOULD NOT close a connection in the
middle of transmitting a response, unless a network or client failure middle of transmitting a response, unless a network or client failure
is suspected. is suspected.
Clients that use persistent connections SHOULD limit the number of Clients that use persistent connections SHOULD limit the number of
simultaneous connections that they maintain to a given server. A simultaneous connections that they maintain to a given server. A
single-user client SHOULD NOT maintain more than 2 connections with single-user client SHOULD NOT maintain more than 2 connections with
any server or proxy. A proxy SHOULD use up to 2*N connections to any server or proxy. A proxy SHOULD use up to 2*N connections to
another server or proxy, where N is the number of simultaneously another server or proxy, where N is the number of simultaneously
active users. These guidelines are intended to improve HTTP response active users. These guidelines are intended to improve HTTP response
times and avoid congestion. times and avoid congestion.
8.2. Message Transmission Requirements 7.2. Message Transmission Requirements
8.2.1. Persistent Connections and Flow Control 7.2.1. Persistent Connections and Flow Control
HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's
flow control mechanisms to resolve temporary overloads, rather than flow control mechanisms to resolve temporary overloads, rather than
terminating connections with the expectation that clients will retry. terminating connections with the expectation that clients will retry.
The latter technique can exacerbate network congestion. The latter technique can exacerbate network congestion.
8.2.2. Monitoring Connections for Error Status Messages 7.2.2. Monitoring Connections for Error Status Messages
An HTTP/1.1 (or later) client sending a message-body SHOULD monitor An HTTP/1.1 (or later) client sending a message-body SHOULD monitor
the network connection for an error status while it is transmitting the network connection for an error status while it is transmitting
the request. If the client sees an error status, it SHOULD the request. If the client sees an error status, it SHOULD
immediately cease transmitting the body. If the body is being sent immediately cease transmitting the body. If the body is being sent
using a "chunked" encoding (Section 3.6), a zero length chunk and using a "chunked" encoding (Section 3.4), a zero length chunk and
empty trailer MAY be used to prematurely mark the end of the message. empty trailer MAY be used to prematurely mark the end of the message.
If the body was preceded by a Content-Length header, the client MUST If the body was preceded by a Content-Length header, the client MUST
close the connection. close the connection.
8.2.3. Use of the 100 (Continue) Status 7.2.3. Use of the 100 (Continue) Status
The purpose of the 100 (Continue) status (see Section 10.1.1) is to The purpose of the 100 (Continue) status (see Section 9.1.1 of
allow a client that is sending a request message with a request body [Part2]) is to allow a client that is sending a request message with
to determine if the origin server is willing to accept the request a request body to determine if the origin server is willing to accept
(based on the request headers) before the client sends the request the request (based on the request headers) before the client sends
body. In some cases, it might either be inappropriate or highly the request body. In some cases, it might either be inappropriate or
inefficient for the client to send the body if the server will reject highly inefficient for the client to send the body if the server will
the message without looking at the body. reject the message without looking at the body.
Requirements for HTTP/1.1 clients: Requirements for HTTP/1.1 clients:
o If a client will wait for a 100 (Continue) response before sending o If a client will wait for a 100 (Continue) response before sending
the request body, it MUST send an Expect request-header field the request body, it MUST send an Expect request-header field
(Section 14.20) with the "100-continue" expectation. (Section 10.2 of [Part2]) with the "100-continue" expectation.
o A client MUST NOT send an Expect request-header field o A client MUST NOT send an Expect request-header field (Section
(Section 14.20) with the "100-continue" expectation if it does not 10.2 of [Part2]) with the "100-continue" expectation if it does
intend to send a request body. not intend to send a request body.
Because of the presence of older implementations, the protocol allows Because of the presence of older implementations, the protocol allows
ambiguous situations in which a client may send "Expect: 100- ambiguous situations in which a client may send "Expect: 100-
continue" without receiving either a 417 (Expectation Failed) status continue" without receiving either a 417 (Expectation Failed) status
or a 100 (Continue) status. Therefore, when a client sends this or a 100 (Continue) status. Therefore, when a client sends this
header field to an origin server (possibly via a proxy) from which it header field to an origin server (possibly via a proxy) from which it
has never seen a 100 (Continue) status, the client SHOULD NOT wait has never seen a 100 (Continue) status, the client SHOULD NOT wait
for an indefinite period before sending the request body. for an indefinite period before sending the request body.
Requirements for HTTP/1.1 origin servers: Requirements for HTTP/1.1 origin servers:
skipping to change at page 53, line 22 skipping to change at page 36, line 37
HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST
respond with a 417 (Expectation Failed) status. respond with a 417 (Expectation Failed) status.
o Proxies SHOULD maintain a cache recording the HTTP version numbers o Proxies SHOULD maintain a cache recording the HTTP version numbers
received from recently-referenced next-hop servers. received from recently-referenced next-hop servers.
o A proxy MUST NOT forward a 100 (Continue) response if the request o A proxy MUST NOT forward a 100 (Continue) response if the request
message was received from an HTTP/1.0 (or earlier) client and did message was received from an HTTP/1.0 (or earlier) client and did
not include an Expect request-header field with the "100-continue" not include an Expect request-header field with the "100-continue"
expectation. This requirement overrides the general rule for expectation. This requirement overrides the general rule for
forwarding of 1xx responses (see Section 10.1). forwarding of 1xx responses (see Section 9.1 of [Part2]).
8.2.4. Client Behavior if Server Prematurely Closes Connection 7.2.4. Client Behavior if Server Prematurely Closes Connection
If an HTTP/1.1 client sends a request which includes a request body, If an HTTP/1.1 client sends a request which includes a request body,
but which does not include an Expect request-header field with the but which does not include an Expect request-header field with the
"100-continue" expectation, and if the client is not directly "100-continue" expectation, and if the client is not directly
connected to an HTTP/1.1 origin server, and if the client sees the connected to an HTTP/1.1 origin server, and if the client sees the
connection close before receiving any status from the server, the connection close before receiving any status from the server, the
client SHOULD retry the request. If the client does retry this client SHOULD retry the request. If the client does retry this
request, it MAY use the following "binary exponential backoff" request, it MAY use the following "binary exponential backoff"
algorithm to be assured of obtaining a reliable response: algorithm to be assured of obtaining a reliable response:
skipping to change at page 54, line 17 skipping to change at page 37, line 32
received, or the user becomes impatient and terminates the retry received, or the user becomes impatient and terminates the retry
process. process.
If at any point an error status is received, the client If at any point an error status is received, the client
o SHOULD NOT continue and o SHOULD NOT continue and
o SHOULD close the connection if it has not completed sending the o SHOULD close the connection if it has not completed sending the
request message. request message.
9. Method Definitions 8. Header Field Definitions
The set of common methods for HTTP/1.1 is defined below. Although
this set can be expanded, additional methods cannot be assumed to
share the same semantics for separately extended clients and servers.
The Host request-header field (Section 14.23) MUST accompany all
HTTP/1.1 requests.
9.1. Safe and Idempotent Methods
9.1.1. Safe Methods
Implementors should be aware that the software represents the user in
their interactions over the Internet, and should be careful to allow
the user to be aware of any actions they might take which may have an
unexpected significance to themselves or others.
In particular, the convention has been established that the GET and
HEAD methods SHOULD NOT have the significance of taking an action
other than retrieval. These methods ought to be considered "safe".
This allows user agents to represent other methods, such as POST, PUT
and DELETE, in a special way, so that the user is made aware of the
fact that a possibly unsafe action is being requested.
Naturally, it is not possible to ensure that the server does not
generate side-effects as a result of performing a GET request; in
fact, some dynamic resources consider that a feature. The important
distinction here is that the user did not request the side-effects,
so therefore cannot be held accountable for them.
9.1.2. Idempotent Methods
Methods can also have the property of "idempotence" in that (aside
from error or expiration issues) the side-effects of N > 0 identical
requests is the same as for a single request. The methods GET, HEAD,
PUT and DELETE share this property. Also, the methods OPTIONS and
TRACE SHOULD NOT have side effects, and so are inherently idempotent.
However, it is possible that a sequence of several requests is non-
idempotent, even if all of the methods executed in that sequence are
idempotent. (A sequence is idempotent if a single execution of the
entire sequence always yields a result that is not changed by a
reexecution of all, or part, of that sequence.) For example, a
sequence is non-idempotent if its result depends on a value that is
later modified in the same sequence.
A sequence that never has side effects is idempotent, by definition
(provided that no concurrent operations are being executed on the
same set of resources).
9.2. OPTIONS
The OPTIONS method represents a request for information about the
communication options available on the request/response chain
identified by the Request-URI. This method allows the client to
determine the options and/or requirements associated with a resource,
or the capabilities of a server, without implying a resource action
or initiating a resource retrieval.
Responses to this method are not cacheable.
If the OPTIONS request includes an entity-body (as indicated by the
presence of Content-Length or Transfer-Encoding), then the media type
MUST be indicated by a Content-Type field. Although this
specification does not define any use for such a body, future
extensions to HTTP might use the OPTIONS body to make more detailed
queries on the server. A server that does not support such an
extension MAY discard the request body.
If the Request-URI is an asterisk ("*"), the OPTIONS request is
intended to apply to the server in general rather than to a specific
resource. Since a server's communication options typically depend on
the resource, the "*" request is only useful as a "ping" or "no-op"
type of method; it does nothing beyond allowing the client to test
the capabilities of the server. For example, this can be used to
test a proxy for HTTP/1.1 compliance (or lack thereof).
If the Request-URI is not an asterisk, the OPTIONS request applies
only to the options that are available when communicating with that
resource.
A 200 response SHOULD include any header fields that indicate
optional features implemented by the server and applicable to that
resource (e.g., Allow), possibly including extensions not defined by
this specification. The response body, if any, SHOULD also include
information about the communication options. The format for such a
body is not defined by this specification, but might be defined by
future extensions to HTTP. Content negotiation MAY be used to select
the appropriate response format. If no response body is included,
the response MUST include a Content-Length field with a field-value
of "0".
The Max-Forwards request-header field MAY be used to target a
specific proxy in the request chain. When a proxy receives an
OPTIONS request on an absoluteURI for which request forwarding is
permitted, the proxy MUST check for a Max-Forwards field. If the
Max-Forwards field-value is zero ("0"), the proxy MUST NOT forward
the message; instead, the proxy SHOULD respond with its own
communication options. If the Max-Forwards field-value is an integer
greater than zero, the proxy MUST decrement the field-value when it
forwards the request. If no Max-Forwards field is present in the
request, then the forwarded request MUST NOT include a Max-Forwards
field.
9.3. GET
The GET method means retrieve whatever information (in the form of an
entity) is identified by the Request-URI. If the Request-URI refers
to a data-producing process, it is the produced data which shall be
returned as the entity in the response and not the source text of the
process, unless that text happens to be the output of the process.
The semantics of the GET method change to a "conditional GET" if the
request message includes an If-Modified-Since, If-Unmodified-Since,
If-Match, If-None-Match, or If-Range header field. A conditional GET
method requests that the entity be transferred only under the
circumstances described by the conditional header field(s). The
conditional GET method is intended to reduce unnecessary network
usage by allowing cached entities to be refreshed without requiring
multiple requests or transferring data already held by the client.
The semantics of the GET method change to a "partial GET" if the
request message includes a Range header field. A partial GET
requests that only part of the entity be transferred, as described in
Section 14.35. The partial GET method is intended to reduce
unnecessary network usage by allowing partially-retrieved entities to
be completed without transferring data already held by the client.
The response to a GET request is cacheable if and only if it meets
the requirements for HTTP caching described in Section 13.
See Section 15.1.3 for security considerations when used for forms.
9.4. HEAD
The HEAD method is identical to GET except that the server MUST NOT
return a message-body in the response. The metainformation contained
in the HTTP headers in response to a HEAD request SHOULD be identical
to the information sent in response to a GET request. This method
can be used for obtaining metainformation about the entity implied by
the request without transferring the entity-body itself. This method
is often used for testing hypertext links for validity,
accessibility, and recent modification.
The response to a HEAD request MAY be cacheable in the sense that the
information contained in the response MAY be used to update a
previously cached entity from that resource. If the new field values
indicate that the cached entity differs from the current entity (as
would be indicated by a change in Content-Length, Content-MD5, ETag
or Last-Modified), then the cache MUST treat the cache entry as
stale.
9.5. POST
The POST method is used to request that the origin server accept the
entity enclosed in the request as a new subordinate of the resource
identified by the Request-URI in the Request-Line. POST is designed
to allow a uniform method to cover the following functions:
o Annotation of existing resources;
o Posting a message to a bulletin board, newsgroup, mailing list, or
similar group of articles;
o Providing a block of data, such as the result of submitting a
form, to a data-handling process;
o Extending a database through an append operation.
The actual function performed by the POST method is determined by the
server and is usually dependent on the Request-URI. The posted
entity is subordinate to that URI in the same way that a file is
subordinate to a directory containing it, a news article is
subordinate to a newsgroup to which it is posted, or a record is
subordinate to a database.
The action performed by the POST method might not result in a
resource that can be identified by a URI. In this case, either 200
(OK) or 204 (No Content) is the appropriate response status,
depending on whether or not the response includes an entity that
describes the result.
If a resource has been created on the origin server, the response
SHOULD be 201 (Created) and contain an entity which describes the
status of the request and refers to the new resource, and a Location
header (see Section 14.30).
Responses to this method are not cacheable, unless the response
includes appropriate Cache-Control or Expires header fields.
However, the 303 (See Other) response can be used to direct the user
agent to retrieve a cacheable resource.
POST requests MUST obey the message transmission requirements set out
in Section 8.2.
See Section 15.1.3 for security considerations.
9.6. PUT
The PUT method requests that the enclosed entity be stored under the
supplied Request-URI. If the Request-URI refers to an already
existing resource, the enclosed entity SHOULD be considered as a
modified version of the one residing on the origin server. If the
Request-URI does not point to an existing resource, and that URI is
capable of being defined as a new resource by the requesting user
agent, the origin server can create the resource with that URI. If a
new resource is created, the origin server MUST inform the user agent
via the 201 (Created) response. If an existing resource is modified,
either the 200 (OK) or 204 (No Content) response codes SHOULD be sent
to indicate successful completion of the request. If the resource
could not be created or modified with the Request-URI, an appropriate
error response SHOULD be given that reflects the nature of the
problem. The recipient of the entity MUST NOT ignore any Content-*
(e.g. Content-Range) headers that it does not understand or
implement and MUST return a 501 (Not Implemented) response in such
cases.
If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable.
The fundamental difference between the POST and PUT requests is
reflected in the different meaning of the Request-URI. The URI in a
POST request identifies the resource that will handle the enclosed
entity. That resource might be a data-accepting process, a gateway
to some other protocol, or a separate entity that accepts
annotations. In contrast, the URI in a PUT request identifies the
entity enclosed with the request -- the user agent knows what URI is
intended and the server MUST NOT attempt to apply the request to some
other resource. If the server desires that the request be applied to
a different URI, it MUST send a 301 (Moved Permanently) response; the
user agent MAY then make its own decision regarding whether or not to
redirect the request.
A single resource MAY be identified by many different URIs. For
example, an article might have a URI for identifying "the current
version" which is separate from the URI identifying each particular
version. In this case, a PUT request on a general URI might result
in several other URIs being defined by the origin server.
HTTP/1.1 does not define how a PUT method affects the state of an
origin server.
PUT requests MUST obey the message transmission requirements set out
in Section 8.2.
Unless otherwise specified for a particular entity-header, the
entity-headers in the PUT request SHOULD be applied to the resource
created or modified by the PUT.
9.7. DELETE
The DELETE method requests that the origin server delete the resource
identified by the Request-URI. This method MAY be overridden by
human intervention (or other means) on the origin server. The client
cannot be guaranteed that the operation has been carried out, even if
the status code returned from the origin server indicates that the
action has been completed successfully. However, the server SHOULD
NOT indicate success unless, at the time the response is given, it
intends to delete the resource or move it to an inaccessible
location.
A successful response SHOULD be 200 (OK) if the response includes an
entity describing the status, 202 (Accepted) if the action has not
yet been enacted, or 204 (No Content) if the action has been enacted
but the response does not include an entity.
If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable.
9.8. TRACE
The TRACE method is used to invoke a remote, application-layer loop-
back of the request message. The final recipient of the request
SHOULD reflect the message received back to the client as the entity-
body of a 200 (OK) response. The final recipient is either the
origin server or the first proxy or gateway to receive a Max-Forwards
value of zero (0) in the request (see Section 14.31). A TRACE
request MUST NOT include an entity.
TRACE allows the client to see what is being received at the other
end of the request chain and use that data for testing or diagnostic
information. The value of the Via header field (Section 14.45) is of
particular interest, since it acts as a trace of the request chain.
Use of the Max-Forwards header field allows the client to limit the
length of the request chain, which is useful for testing a chain of
proxies forwarding messages in an infinite loop.
If the request is valid, the response SHOULD contain the entire
request message in the entity-body, with a Content-Type of "message/
http". Responses to this method MUST NOT be cached.
9.9. CONNECT
This specification reserves the method name CONNECT for use with a
proxy that can dynamically switch to being a tunnel (e.g. SSL
tunneling [Luo1998]).
10. Status Code Definitions
Each Status-Code is described below, including a description of which
method(s) it can follow and any metainformation required in the
response.
10.1. Informational 1xx
This class of status code indicates a provisional response,
consisting only of the Status-Line and optional headers, and is
terminated by an empty line. There are no required headers for this
class of status code. Since HTTP/1.0 did not define any 1xx status
codes, servers MUST NOT send a 1xx response to an HTTP/1.0 client
except under experimental conditions.
A client MUST be prepared to accept one or more 1xx status responses
prior to a regular response, even if the client does not expect a 100
(Continue) status message. Unexpected 1xx status responses MAY be
ignored by a user agent.
Proxies MUST forward 1xx responses, unless the connection between the
proxy and its client has been closed, or unless the proxy itself
requested the generation of the 1xx response. (For example, if a
proxy adds a "Expect: 100-continue" field when it forwards a request,
then it need not forward the corresponding 100 (Continue)
response(s).)
10.1.1. 100 Continue
The client SHOULD continue with its request. This interim response
is used to inform the client that the initial part of the request has
been received and has not yet been rejected by the server. The
client SHOULD continue by sending the remainder of the request or, if
the request has already been completed, ignore this response. The
server MUST send a final response after the request has been
completed. See Section 8.2.3 for detailed discussion of the use and
handling of this status code.
10.1.2. 101 Switching Protocols
The server understands and is willing to comply with the client's
request, via the Upgrade message header field (Section 14.42), for a
change in the application protocol being used on this connection.
The server will switch protocols to those defined by the response's
Upgrade header field immediately after the empty line which
terminates the 101 response.
The protocol SHOULD be switched only when it is advantageous to do
so. For example, switching to a newer version of HTTP is
advantageous over older versions, and switching to a real-time,
synchronous protocol might be advantageous when delivering resources
that use such features.
10.2. Successful 2xx
This class of status code indicates that the client's request was
successfully received, understood, and accepted.
10.2.1. 200 OK
The request has succeeded. The information returned with the
response is dependent on the method used in the request, for example:
GET an entity corresponding to the requested resource is sent in the
response;
HEAD the entity-header fields corresponding to the requested
resource are sent in the response without any message-body;
POST an entity describing or containing the result of the action;
TRACE an entity containing the request message as received by the
end server.
10.2.2. 201 Created
The request has been fulfilled and resulted in a new resource being
created. The newly created resource can be referenced by the URI(s)
returned in the entity of the response, with the most specific URI
for the resource given by a Location header field. The response
SHOULD include an entity containing a list of resource
characteristics and location(s) from which the user or user agent can
choose the one most appropriate. The entity format is specified by
the media type given in the Content-Type header field. The origin
server MUST create the resource before returning the 201 status code.
If the action cannot be carried out immediately, the server SHOULD
respond with 202 (Accepted) response instead.
A 201 response MAY contain an ETag response header field indicating
the current value of the entity tag for the requested variant just
created, see Section 14.19.
10.2.3. 202 Accepted
The request has been accepted for processing, but the processing has
not been completed. The request might or might not eventually be
acted upon, as it might be disallowed when processing actually takes
place. There is no facility for re-sending a status code from an
asynchronous operation such as this.
The 202 response is intentionally non-committal. Its purpose is to
allow a server to accept a request for some other process (perhaps a
batch-oriented process that is only run once per day) without
requiring that the user agent's connection to the server persist
until the process is completed. The entity returned with this
response SHOULD include an indication of the request's current status
and either a pointer to a status monitor or some estimate of when the
user can expect the request to be fulfilled.
10.2.4. 203 Non-Authoritative Information
The returned metainformation in the entity-header is not the
definitive set as available from the origin server, but is gathered
from a local or a third-party copy. The set presented MAY be a
subset or superset of the original version. For example, including
local annotation information about the resource might result in a
superset of the metainformation known by the origin server. Use of
this response code is not required and is only appropriate when the
response would otherwise be 200 (OK).
10.2.5. 204 No Content
The server has fulfilled the request but does not need to return an
entity-body, and might want to return updated metainformation. The
response MAY include new or updated metainformation in the form of
entity-headers, which if present SHOULD be associated with the
requested variant.
If the client is a user agent, it SHOULD NOT change its document view
from that which caused the request to be sent. This response is
primarily intended to allow input for actions to take place without
causing a change to the user agent's active document view, although
any new or updated metainformation SHOULD be applied to the document
currently in the user agent's active view.
The 204 response MUST NOT include a message-body, and thus is always
terminated by the first empty line after the header fields.
10.2.6. 205 Reset Content
The server has fulfilled the request and the user agent SHOULD reset
the document view which caused the request to be sent. This response
is primarily intended to allow input for actions to take place via
user input, followed by a clearing of the form in which the input is
given so that the user can easily initiate another input action. The
response MUST NOT include an entity.
10.2.7. 206 Partial Content
The server has fulfilled the partial GET request for the resource.
The request MUST have included a Range header field (Section 14.35)
indicating the desired range, and MAY have included an If-Range
header field (Section 14.27) to make the request conditional.
The response MUST include the following header fields:
o Either a Content-Range header field (Section 14.16) indicating the
range included with this response, or a multipart/byteranges
Content-Type including Content-Range fields for each part. If a
Content-Length header field is present in the response, its value
MUST match the actual number of OCTETs transmitted in the message-
body.
o Date
o ETag and/or Content-Location, if the header would have been sent
in a 200 response to the same request
o Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same
variant
If the 206 response is the result of an If-Range request that used a
strong cache validator (see Section 13.3.3), the response SHOULD NOT
include other entity-headers. If the response is the result of an
If-Range request that used a weak validator, the response MUST NOT
include other entity-headers; this prevents inconsistencies between
cached entity-bodies and updated headers. Otherwise, the response
MUST include all of the entity-headers that would have been returned
with a 200 (OK) response to the same request.
A cache MUST NOT combine a 206 response with other previously cached
content if the ETag or Last-Modified headers do not match exactly,
see 13.5.4.
A cache that does not support the Range and Content-Range headers
MUST NOT cache 206 (Partial) responses.
10.3. Redirection 3xx
This class of status code indicates that further action needs to be
taken by the user agent in order to fulfill the request. The action
required MAY be carried out by the user agent without interaction
with the user if and only if the method used in the second request is
GET or HEAD. A client SHOULD detect infinite redirection loops,
since such loops generate network traffic for each redirection.
Note: previous versions of this specification recommended a
maximum of five redirections. Content developers should be aware
that there might be clients that implement such a fixed
limitation.
10.3.1. 300 Multiple Choices
The requested resource corresponds to any one of a set of
representations, each with its own specific location, and agent-
driven negotiation information (Section 12) is being provided so that
the user (or user agent) can select a preferred representation and
redirect its request to that location.
Unless it was a HEAD request, the response SHOULD include an entity
containing a list of resource characteristics and location(s) from
which the user or user agent can choose the one most appropriate.
The entity format is specified by the media type given in the
Content-Type header field. Depending upon the format and the
capabilities of the user agent, selection of the most appropriate
choice MAY be performed automatically. However, this specification
does not define any standard for such automatic selection.
If the server has a preferred choice of representation, it SHOULD
include the specific URI for that representation in the Location
field; user agents MAY use the Location field value for automatic
redirection. This response is cacheable unless indicated otherwise.
10.3.2. 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any
future references to this resource SHOULD use one of the returned
URIs. Clients with link editing capabilities ought to automatically
re-link references to the Request-URI to one or more of the new
references returned by the server, where possible. This response is
cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
If the 301 status code is received in response to a request other
than GET or HEAD, the user agent MUST NOT automatically redirect the
request unless it can be confirmed by the user, since this might
change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after
receiving a 301 status code, some existing HTTP/1.0 user agents
will erroneously change it into a GET request.
10.3.3. 302 Found
The requested resource resides temporarily under a different URI.
Since the redirection might be altered on occasion, the client SHOULD
continue to use the Request-URI for future requests. This response
is only cacheable if indicated by a Cache-Control or Expires header
field.
The temporary URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
If the 302 status code is received in response to a request other
than GET or HEAD, the user agent MUST NOT automatically redirect the
request unless it can be confirmed by the user, since this might
change the conditions under which the request was issued.
Note: RFC 1945 and RFC 2068 specify that the client is not allowed
to change the method on the redirected request. However, most
existing user agent implementations treat 302 as if it were a 303
response, performing a GET on the Location field-value regardless
of the original request method. The status codes 303 and 307 have
been added for servers that wish to make unambiguously clear which
kind of reaction is expected of the client.
10.3.4. 303 See Other
The response to the request can be found under a different URI and
SHOULD be retrieved using a GET method on that resource. This method
exists primarily to allow the output of a POST-activated script to
redirect the user agent to a selected resource. The new URI is not a
substitute reference for the originally requested resource. The 303
response MUST NOT be cached, but the response to the second
(redirected) request might be cacheable.
The different URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
Note: Many pre-HTTP/1.1 user agents do not understand the 303
status. When interoperability with such clients is a concern, the
302 status code may be used instead, since most user agents react
to a 302 response as described here for 303.
10.3.5. 304 Not Modified
If the client has performed a conditional GET request and access is
allowed, but the document has not been modified, the server SHOULD
respond with this status code. The 304 response MUST NOT contain a
message-body, and thus is always terminated by the first empty line
after the header fields.
The response MUST include the following header fields:
o Date, unless its omission is required by Section 14.18.1
If a clockless origin server obeys these rules, and proxies and
clients add their own Date to any response received without one (as
already specified by [RFC 2068], section 14.19), caches will operate
correctly.
o ETag and/or Content-Location, if the header would have been sent
in a 200 response to the same request
o Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same
variant
If the conditional GET used a strong cache validator (see
Section 13.3.3), the response SHOULD NOT include other entity-
headers. Otherwise (i.e., the conditional GET used a weak
validator), the response MUST NOT include other entity-headers; this
prevents inconsistencies between cached entity-bodies and updated
headers.
If a 304 response indicates an entity not currently cached, then the
cache MUST disregard the response and repeat the request without the
conditional.
If a cache uses a received 304 response to update a cache entry, the
cache MUST update the entry to reflect any new field values given in
the response.
10.3.6. 305 Use Proxy
The requested resource MUST be accessed through the proxy given by
the Location field. The Location field gives the URI of the proxy.
The recipient is expected to repeat this single request via the
proxy. 305 responses MUST only be generated by origin servers.
Note: RFC 2068 was not clear that 305 was intended to redirect a
single request, and to be generated by origin servers only. Not
observing these limitations has significant security consequences.
10.3.7. 306 (Unused)
The 306 status code was used in a previous version of the
specification, is no longer used, and the code is reserved.
10.3.8. 307 Temporary Redirect
The requested resource resides temporarily under a different URI.
Since the redirection MAY be altered on occasion, the client SHOULD
continue to use the Request-URI for future requests. This response
is only cacheable if indicated by a Cache-Control or Expires header
field.
The temporary URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s) , since many pre-HTTP/1.1 user agents do not
understand the 307 status. Therefore, the note SHOULD contain the
information necessary for a user to repeat the original request on
the new URI.
If the 307 status code is received in response to a request other
than GET or HEAD, the user agent MUST NOT automatically redirect the
request unless it can be confirmed by the user, since this might
change the conditions under which the request was issued.
10.4. Client Error 4xx
The 4xx class of status code is intended for cases in which the
client seems to have erred. Except when responding to a HEAD
request, the server SHOULD include an entity containing an
explanation of the error situation, and whether it is a temporary or
permanent condition. These status codes are applicable to any
request method. User agents SHOULD display any included entity to
the user.
If the client is sending data, a server implementation using TCP
SHOULD be careful to ensure that the client acknowledges receipt of
the packet(s) containing the response, before the server closes the
input connection. If the client continues sending data to the server
after the close, the server's TCP stack will send a reset packet to
the client, which may erase the client's unacknowledged input buffers
before they can be read and interpreted by the HTTP application.
10.4.1. 400 Bad Request
The request could not be understood by the server due to malformed
syntax. The client SHOULD NOT repeat the request without
modifications.
10.4.2. 401 Unauthorized
The request requires user authentication. The response MUST include
a WWW-Authenticate header field (Section 14.47) containing a
challenge applicable to the requested resource. The client MAY
repeat the request with a suitable Authorization header field
(Section 14.8). If the request already included Authorization
credentials, then the 401 response indicates that authorization has
been refused for those credentials. If the 401 response contains the
same challenge as the prior response, and the user agent has already
attempted authentication at least once, then the user SHOULD be
presented the entity that was given in the response, since that
entity might include relevant diagnostic information. HTTP access
authentication is explained in "HTTP Authentication: Basic and Digest
Access Authentication" [RFC2617].
10.4.3. 402 Payment Required
This code is reserved for future use.
10.4.4. 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the
reason for the refusal in the entity. If the server does not wish to
make this information available to the client, the status code 404
(Not Found) can be used instead.
10.4.5. 404 Not Found
The server has not found anything matching the Request-URI. No
indication is given of whether the condition is temporary or
permanent. The 410 (Gone) status code SHOULD be used if the server
knows, through some internally configurable mechanism, that an old
resource is permanently unavailable and has no forwarding address.
This status code is commonly used when the server does not wish to
reveal exactly why the request has been refused, or when no other
response is applicable.
10.4.6. 405 Method Not Allowed
The method specified in the Request-Line is not allowed for the
resource identified by the Request-URI. The response MUST include an
Allow header containing a list of valid methods for the requested
resource.
10.4.7. 406 Not Acceptable
The resource identified by the request is only capable of generating
response entities which have content characteristics not acceptable
according to the accept headers sent in the request.
Unless it was a HEAD request, the response SHOULD include an entity
containing a list of available entity characteristics and location(s)
from which the user or user agent can choose the one most
appropriate. The entity format is specified by the media type given
in the Content-Type header field. Depending upon the format and the
capabilities of the user agent, selection of the most appropriate
choice MAY be performed automatically. However, this specification
does not define any standard for such automatic selection.
Note: HTTP/1.1 servers are allowed to return responses which are
not acceptable according to the accept headers sent in the
request. In some cases, this may even be preferable to sending a
406 response. User agents are encouraged to inspect the headers
of an incoming response to determine if it is acceptable.
If the response could be unacceptable, a user agent SHOULD
temporarily stop receipt of more data and query the user for a
decision on further actions.
10.4.8. 407 Proxy Authentication Required
This code is similar to 401 (Unauthorized), but indicates that the
client must first authenticate itself with the proxy. The proxy MUST
return a Proxy-Authenticate header field (Section 14.33) containing a
challenge applicable to the proxy for the requested resource. The
client MAY repeat the request with a suitable Proxy-Authorization
header field (Section 14.34). HTTP access authentication is
explained in "HTTP Authentication: Basic and Digest Access
Authentication" [RFC2617].
10.4.9. 408 Request Timeout
The client did not produce a request within the time that the server
was prepared to wait. The client MAY repeat the request without
modifications at any later time.
10.4.10. 409 Conflict
The request could not be completed due to a conflict with the current
state of the resource. This code is only allowed in situations where
it is expected that the user might be able to resolve the conflict
and resubmit the request. The response body SHOULD include enough
information for the user to recognize the source of the conflict.
Ideally, the response entity would include enough information for the
user or user agent to fix the problem; however, that might not be
possible and is not required.
Conflicts are most likely to occur in response to a PUT request. For
example, if versioning were being used and the entity being PUT
included changes to a resource which conflict with those made by an
earlier (third-party) request, the server might use the 409 response
to indicate that it can't complete the request. In this case, the
response entity would likely contain a list of the differences
between the two versions in a format defined by the response Content-
Type.
10.4.11. 410 Gone
The requested resource is no longer available at the server and no
forwarding address is known. This condition is expected to be
considered permanent. Clients with link editing capabilities SHOULD
delete references to the Request-URI after user approval. If the
server does not know, or has no facility to determine, whether or not
the condition is permanent, the status code 404 (Not Found) SHOULD be
used instead. This response is cacheable unless indicated otherwise.
The 410 response is primarily intended to assist the task of web
maintenance by notifying the recipient that the resource is
intentionally unavailable and that the server owners desire that
remote links to that resource be removed. Such an event is common
for limited-time, promotional services and for resources belonging to
individuals no longer working at the server's site. It is not
necessary to mark all permanently unavailable resources as "gone" or
to keep the mark for any length of time -- that is left to the
discretion of the server owner.
10.4.12. 411 Length Required
The server refuses to accept the request without a defined Content-
Length. The client MAY repeat the request if it adds a valid
Content-Length header field containing the length of the message-body
in the request message.
10.4.13. 412 Precondition Failed
The precondition given in one or more of the request-header fields
evaluated to false when it was tested on the server. This response
code allows the client to place preconditions on the current resource
metainformation (header field data) and thus prevent the requested
method from being applied to a resource other than the one intended.
10.4.14. 413 Request Entity Too Large
The server is refusing to process a request because the request
entity is larger than the server is willing or able to process. The
server MAY close the connection to prevent the client from continuing
the request.
If the condition is temporary, the server SHOULD include a Retry-
After header field to indicate that it is temporary and after what
time the client MAY try again.
10.4.15. 414 Request-URI Too Long
The server is refusing to service the request because the Request-URI
is longer than the server is willing to interpret. This rare
condition is only likely to occur when a client has improperly
converted a POST request to a GET request with long query
information, when the client has descended into a URI "black hole" of
redirection (e.g., a redirected URI prefix that points to a suffix of
itself), or when the server is under attack by a client attempting to
exploit security holes present in some servers using fixed-length
buffers for reading or manipulating the Request-URI.
10.4.16. 415 Unsupported Media Type
The server is refusing to service the request because the entity of
the request is in a format not supported by the requested resource
for the requested method.
10.4.17. 416 Requested Range Not Satisfiable
A server SHOULD return a response with this status code if a request
included a Range request-header field (Section 14.35), and none of
the range-specifier values in this field overlap the current extent
of the selected resource, and the request did not include an If-Range
request-header field. (For byte-ranges, this means that the first-
byte-pos of all of the byte-range-spec values were greater than the
current length of the selected resource.)
When this status code is returned for a byte-range request, the
response SHOULD include a Content-Range entity-header field
specifying the current length of the selected resource (see
Section 14.16). This response MUST NOT use the multipart/byteranges
content-type.
10.4.18. 417 Expectation Failed
The expectation given in an Expect request-header field (see
Section 14.20) could not be met by this server, or, if the server is
a proxy, the server has unambiguous evidence that the request could
not be met by the next-hop server.
10.5. Server Error 5xx
Response status codes beginning with the digit "5" indicate cases in
which the server is aware that it has erred or is incapable of
performing the request. Except when responding to a HEAD request,
the server SHOULD include an entity containing an explanation of the
error situation, and whether it is a temporary or permanent
condition. User agents SHOULD display any included entity to the
user. These response codes are applicable to any request method.
10.5.1. 500 Internal Server Error
The server encountered an unexpected condition which prevented it
from fulfilling the request.
10.5.2. 501 Not Implemented
The server does not support the functionality required to fulfill the
request. This is the appropriate response when the server does not
recognize the request method and is not capable of supporting it for
any resource.
10.5.3. 502 Bad Gateway
The server, while acting as a gateway or proxy, received an invalid
response from the upstream server it accessed in attempting to
fulfill the request.
10.5.4. 503 Service Unavailable
The server is currently unable to handle the request due to a
temporary overloading or maintenance of the server. The implication
is that this is a temporary condition which will be alleviated after
some delay. If known, the length of the delay MAY be indicated in a
Retry-After header. If no Retry-After is given, the client SHOULD
handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a
server must use it when becoming overloaded. Some servers may
wish to simply refuse the connection.
10.5.5. 504 Gateway Timeout
The server, while acting as a gateway or proxy, did not receive a
timely response from the upstream server specified by the URI (e.g.
HTTP, FTP, LDAP) or some other auxiliary server (e.g. DNS) it needed
to access in attempting to complete the request.
Note: Note to implementors: some deployed proxies are known to
return 400 or 500 when DNS lookups time out.
10.5.6. 505 HTTP Version Not Supported
The server does not support, or refuses to support, the HTTP protocol
version that was used in the request message. The server is
indicating that it is unable or unwilling to complete the request
using the same major version as the client, as described in
Section 3.1, other than with this error message. The response SHOULD
contain an entity describing why that version is not supported and
what other protocols are supported by that server.
11. Access Authentication
HTTP provides several OPTIONAL challenge-response authentication
mechanisms which can be used by a server to challenge a client
request and by a client to provide authentication information. The
general framework for access authentication, and the specification of
"basic" and "digest" authentication, are specified in "HTTP
Authentication: Basic and Digest Access Authentication" [RFC2617].
This specification adopts the definitions of "challenge" and
"credentials" from that specification.
12. Content Negotiation
Most HTTP responses include an entity which contains information for
interpretation by a human user. Naturally, it is desirable to supply
the user with the "best available" entity corresponding to the
request. Unfortunately for servers and caches, not all users have
the same preferences for what is "best," and not all user agents are
equally capable of rendering all entity types. For that reason, HTTP
has provisions for several mechanisms for "content negotiation" --
the process of selecting the best representation for a given response
when there are multiple representations available.
Note: This is not called "format negotiation" because the
alternate representations may be of the same media type, but use
different capabilities of that type, be in different languages,
etc.
Any response containing an entity-body MAY be subject to negotiation,
including error responses.
There are two kinds of content negotiation which are possible in
HTTP: server-driven and agent-driven negotiation. These two kinds of
negotiation are orthogonal and thus may be used separately or in
combination. One method of combination, referred to as transparent
negotiation, occurs when a cache uses the agent-driven negotiation
information provided by the origin server in order to provide server-
driven negotiation for subsequent requests.
12.1. Server-driven Negotiation
If the selection of the best representation for a response is made by
an algorithm located at the server, it is called server-driven
negotiation. Selection is based on the available representations of
the response (the dimensions over which it can vary; e.g. language,
content-coding, etc.) and the contents of particular header fields in
the request message or on other information pertaining to the request
(such as the network address of the client).
Server-driven negotiation is advantageous when the algorithm for
selecting from among the available representations is difficult to
describe to the user agent, or when the server desires to send its
"best guess" to the client along with the first response (hoping to
avoid the round-trip delay of a subsequent request if the "best
guess" is good enough for the user). In order to improve the
server's guess, the user agent MAY include request header fields
(Accept, Accept-Language, Accept-Encoding, etc.) which describe its
preferences for such a response.
Server-driven negotiation has disadvantages:
1. It is impossible for the server to accurately determine what
might be "best" for any given user, since that would require
complete knowledge of both the capabilities of the user agent and
the intended use for the response (e.g., does the user want to
view it on screen or print it on paper?).
2. Having the user agent describe its capabilities in every request
can be both very inefficient (given that only a small percentage
of responses have multiple representations) and a potential
violation of the user's privacy.
3. It complicates the implementation of an origin server and the
algorithms for generating responses to a request.
4. It may limit a public cache's ability to use the same response
for multiple user's requests.
HTTP/1.1 includes the following request-header fields for enabling
server-driven negotiation through description of user agent
capabilities and user preferences: Accept (Section 14.1), Accept-
Charset (Section 14.2), Accept-Encoding (Section 14.3), Accept-
Language (Section 14.4), and User-Agent (Section 14.43). However, an
origin server is not limited to these dimensions and MAY vary the
response based on any aspect of the request, including information
outside the request-header fields or within extension header fields
not defined by this specification.
The Vary header field can be used to express the parameters the
server uses to select a representation that is subject to server-
driven negotiation. See Section 13.6 for use of the Vary header
field by caches and Section 14.44 for use of the Vary header field by
servers.
12.2. Agent-driven Negotiation
With agent-driven negotiation, selection of the best representation
for a response is performed by the user agent after receiving an
initial response from the origin server. Selection is based on a
list of the available representations of the response included within
the header fields or entity-body of the initial response, with each
representation identified by its own URI. Selection from among the
representations may be performed automatically (if the user agent is
capable of doing so) or manually by the user selecting from a
generated (possibly hypertext) menu.
Agent-driven negotiation is advantageous when the response would vary
over commonly-used dimensions (such as type, language, or encoding),
when the origin server is unable to determine a user agent's
capabilities from examining the request, and generally when public
caches are used to distribute server load and reduce network usage.
Agent-driven negotiation suffers from the disadvantage of needing a
second request to obtain the best alternate representation. This
second request is only efficient when caching is used. In addition,
this specification does not define any mechanism for supporting
automatic selection, though it also does not prevent any such
mechanism from being developed as an extension and used within
HTTP/1.1.
HTTP/1.1 defines the 300 (Multiple Choices) and 406 (Not Acceptable)
status codes for enabling agent-driven negotiation when the server is
unwilling or unable to provide a varying response using server-driven
negotiation.
12.3. Transparent Negotiation
Transparent negotiation is a combination of both server-driven and
agent-driven negotiation. When a cache is supplied with a form of
the list of available representations of the response (as in agent-
driven negotiation) and the dimensions of variance are completely
understood by the cache, then the cache becomes capable of performing
server-driven negotiation on behalf of the origin server for
subsequent requests on that resource.
Transparent negotiation has the advantage of distributing the
negotiation work that would otherwise be required of the origin
server and also removing the second request delay of agent-driven
negotiation when the cache is able to correctly guess the right
response.
This specification does not define any mechanism for transparent
negotiation, though it also does not prevent any such mechanism from
being developed as an extension that could be used within HTTP/1.1.
13. Caching in HTTP
HTTP is typically used for distributed information systems, where
performance can be improved by the use of response caches. The
HTTP/1.1 protocol includes a number of elements intended to make
caching work as well as possible. Because these elements are
inextricable from other aspects of the protocol, and because they
interact with each other, it is useful to describe the basic caching
design of HTTP separately from the detailed descriptions of methods,
headers, response codes, etc.
Caching would be useless if it did not significantly improve
performance. The goal of caching in HTTP/1.1 is to eliminate the
need to send requests in many cases, and to eliminate the need to
send full responses in many other cases. The former reduces the
number of network round-trips required for many operations; we use an
"expiration" mechanism for this purpose (see Section 13.2). The
latter reduces network bandwidth requirements; we use a "validation"
mechanism for this purpose (see Section 13.3).
Requirements for performance, availability, and disconnected
operation require us to be able to relax the goal of semantic
transparency. The HTTP/1.1 protocol allows origin servers, caches,
and clients to explicitly reduce transparency when necessary.
However, because non-transparent operation may confuse non-expert
users, and might be incompatible with certain server applications
(such as those for ordering merchandise), the protocol requires that
transparency be relaxed
o only by an explicit protocol-level request when relaxed by client
or origin server
o only with an explicit warning to the end user when relaxed by
cache or client
Therefore, the HTTP/1.1 protocol provides these important elements:
1. Protocol features that provide full semantic transparency when
this is required by all parties.
2. Protocol features that allow an origin server or user agent to
explicitly request and control non-transparent operation.
3. Protocol features that allow a cache to attach warnings to
responses that do not preserve the requested approximation of
semantic transparency.
A basic principle is that it must be possible for the clients to
detect any potential relaxation of semantic transparency.
Note: The server, cache, or client implementor might be faced with
design decisions not explicitly discussed in this specification.
If a decision might affect semantic transparency, the implementor
ought to err on the side of maintaining transparency unless a
careful and complete analysis shows significant benefits in
breaking transparency.
13.1.
13.1.1. Cache Correctness
A correct cache MUST respond to a request with the most up-to-date
response held by the cache that is appropriate to the request (see
sections 13.2.5, 13.2.6, and 13.12) which meets one of the following
conditions:
1. It has been checked for equivalence with what the origin server
would have returned by revalidating the response with the origin
server (Section 13.3);
2. It is "fresh enough" (see Section 13.2). In the default case,
this means it meets the least restrictive freshness requirement
of the client, origin server, and cache (see Section 14.9); if
the origin server so specifies, it is the freshness requirement
of the origin server alone. If a stored response is not "fresh
enough" by the most restrictive freshness requirement of both the
client and the origin server, in carefully considered
circumstances the cache MAY still return the response with the
appropriate Warning header (see section 13.1.5 and 14.46), unless
such a response is prohibited (e.g., by a "no-store" cache-
directive, or by a "no-cache" cache-request-directive; see
Section 14.9).
3. It is an appropriate 304 (Not Modified), 305 (Proxy Redirect), or
error (4xx or 5xx) response message.
If the cache can not communicate with the origin server, then a
correct cache SHOULD respond as above if the response can be
correctly served from the cache; if not it MUST return an error or
warning indicating that there was a communication failure.
If a cache receives a response (either an entire response, or a 304
(Not Modified) response) that it would normally forward to the
requesting client, and the received response is no longer fresh, the
cache SHOULD forward it to the requesting client without adding a new
Warning (but without removing any existing Warning headers). A cache
SHOULD NOT attempt to revalidate a response simply because that
response became stale in transit; this might lead to an infinite
loop. A user agent that receives a stale response without a Warning
MAY display a warning indication to the user.
13.1.2. Warnings
Whenever a cache returns a response that is neither first-hand nor
"fresh enough" (in the sense of condition 2 in Section 13.1.1), it
MUST attach a warning to that effect, using a Warning general-header.
The Warning header and the currently defined warnings are described
in Section 14.46. The warning allows clients to take appropriate
action.
Warnings MAY be used for other purposes, both cache-related and
otherwise. The use of a warning, rather than an error status code,
distinguish these responses from true failures.
Warnings are assigned three digit warn-codes. The first digit
indicates whether the Warning MUST or MUST NOT be deleted from a
stored cache entry after a successful revalidation:
1xx Warnings that describe the freshness or revalidation status of
the response, and so MUST be deleted after a successful
revalidation. 1XX warn-codes MAY be generated by a cache only when
validating a cached entry. It MUST NOT be generated by clients.
2xx Warnings that describe some aspect of the entity body or entity
headers that is not rectified by a revalidation (for example, a
lossy compression of the entity bodies) and which MUST NOT be
deleted after a successful revalidation.
See Section 14.46 for the definitions of the codes themselves.
HTTP/1.0 caches will cache all Warnings in responses, without
deleting the ones in the first category. Warnings in responses that
are passed to HTTP/1.0 caches carry an extra warning-date field,
which prevents a future HTTP/1.1 recipient from believing an
erroneously cached Warning.
Warnings also carry a warning text. The text MAY be in any
appropriate natural language (perhaps based on the client's Accept
headers), and include an OPTIONAL indication of what character set is
used.
Multiple warnings MAY be attached to a response (either by the origin
server or by a cache), including multiple warnings with the same code
number. For example, a server might provide the same warning with
texts in both English and Basque.
When multiple warnings are attached to a response, it might not be
practical or reasonable to display all of them to the user. This
version of HTTP does not specify strict priority rules for deciding
which warnings to display and in what order, but does suggest some
heuristics.
13.1.3. Cache-control Mechanisms
The basic cache mechanisms in HTTP/1.1 (server-specified expiration
times and validators) are implicit directives to caches. In some
cases, a server or client might need to provide explicit directives
to the HTTP caches. We use the Cache-Control header for this
purpose.
The Cache-Control header allows a client or server to transmit a
variety of directives in either requests or responses. These
directives typically override the default caching algorithms. As a
general rule, if there is any apparent conflict between header
values, the most restrictive interpretation is applied (that is, the
one that is most likely to preserve semantic transparency). However,
in some cases, cache-control directives are explicitly specified as
weakening the approximation of semantic transparency (for example,
"max-stale" or "public").
The cache-control directives are described in detail in Section 14.9.
13.1.4. Explicit User Agent Warnings
Many user agents make it possible for users to override the basic
caching mechanisms. For example, the user agent might allow the user
to specify that cached entities (even explicitly stale ones) are
never validated. Or the user agent might habitually add "Cache-
Control: max-stale=3600" to every request. The user agent SHOULD NOT
default to either non-transparent behavior, or behavior that results
in abnormally ineffective caching, but MAY be explicitly configured
to do so by an explicit action of the user.
If the user has overridden the basic caching mechanisms, the user
agent SHOULD explicitly indicate to the user whenever this results in
the display of information that might not meet the server's
transparency requirements (in particular, if the displayed entity is
known to be stale). Since the protocol normally allows the user
agent to determine if responses are stale or not, this indication
need only be displayed when this actually happens. The indication
need not be a dialog box; it could be an icon (for example, a picture
of a rotting fish) or some other indicator.
If the user has overridden the caching mechanisms in a way that would
abnormally reduce the effectiveness of caches, the user agent SHOULD
continually indicate this state to the user (for example, by a
display of a picture of currency in flames) so that the user does not
inadvertently consume excess resources or suffer from excessive
latency.
13.1.5. Exceptions to the Rules and Warnings
In some cases, the operator of a cache MAY choose to configure it to
return stale responses even when not requested by clients. This
decision ought not be made lightly, but may be necessary for reasons
of availability or performance, especially when the cache is poorly
connected to the origin server. Whenever a cache returns a stale
response, it MUST mark it as such (using a Warning header) enabling
the client software to alert the user that there might be a potential
problem.
It also allows the user agent to take steps to obtain a first-hand or
fresh response. For this reason, a cache SHOULD NOT return a stale
response if the client explicitly requests a first-hand or fresh one,
unless it is impossible to comply for technical or policy reasons.
13.1.6. Client-controlled Behavior
While the origin server (and to a lesser extent, intermediate caches,
by their contribution to the age of a response) are the primary
source of expiration information, in some cases the client might need
to control a cache's decision about whether to return a cached
response without validating it. Clients do this using several
directives of the Cache-Control header.
A client's request MAY specify the maximum age it is willing to
accept of an unvalidated response; specifying a value of zero forces
the cache(s) to revalidate all responses. A client MAY also specify
the minimum time remaining before a response expires. Both of these
options increase constraints on the behavior of caches, and so cannot
further relax the cache's approximation of semantic transparency.
A client MAY also specify that it will accept stale responses, up to
some maximum amount of staleness. This loosens the constraints on
the caches, and so might violate the origin server's specified
constraints on semantic transparency, but might be necessary to
support disconnected operation, or high availability in the face of
poor connectivity.
13.2. Expiration Model
13.2.1. Server-Specified Expiration
HTTP caching works best when caches can entirely avoid making
requests to the origin server. The primary mechanism for avoiding
requests is for an origin server to provide an explicit expiration
time in the future, indicating that a response MAY be used to satisfy
subsequent requests. In other words, a cache can return a fresh
response without first contacting the server.
Our expectation is that servers will assign future explicit
expiration times to responses in the belief that the entity is not
likely to change, in a semantically significant way, before the
expiration time is reached. This normally preserves semantic
transparency, as long as the server's expiration times are carefully
chosen.
The expiration mechanism applies only to responses taken from a cache
and not to first-hand responses forwarded immediately to the
requesting client.
If an origin server wishes to force a semantically transparent cache
to validate every request, it MAY assign an explicit expiration time
in the past. This means that the response is always stale, and so
the cache SHOULD validate it before using it for subsequent requests.
See Section 14.9.4 for a more restrictive way to force revalidation.
If an origin server wishes to force any HTTP/1.1 cache, no matter how
it is configured, to validate every request, it SHOULD use the "must-
revalidate" cache-control directive (see Section 14.9).
Servers specify explicit expiration times using either the Expires
header, or the max-age directive of the Cache-Control header.
An expiration time cannot be used to force a user agent to refresh
its display or reload a resource; its semantics apply only to caching
mechanisms, and such mechanisms need only check a resource's
expiration status when a new request for that resource is initiated.
See Section 13.13 for an explanation of the difference between caches
and history mechanisms.
13.2.2. Heuristic Expiration
Since origin servers do not always provide explicit expiration times,
HTTP caches typically assign heuristic expiration times, employing
algorithms that use other header values (such as the Last-Modified
time) to estimate a plausible expiration time. The HTTP/1.1
specification does not provide specific algorithms, but does impose
worst-case constraints on their results. Since heuristic expiration
times might compromise semantic transparency, they ought to used
cautiously, and we encourage origin servers to provide explicit
expiration times as much as possible.
13.2.3. Age Calculations
In order to know if a cached entry is fresh, a cache needs to know if
its age exceeds its freshness lifetime. We discuss how to calculate
the latter in Section 13.2.4; this section describes how to calculate
the age of a response or cache entry.
In this discussion, we use the term "now" to mean "the current value
of the clock at the host performing the calculation." Hosts that use
HTTP, but especially hosts running origin servers and caches, SHOULD
use NTP [RFC1305] or some similar protocol to synchronize their
clocks to a globally accurate time standard.
HTTP/1.1 requires origin servers to send a Date header, if possible,
with every response, giving the time at which the response was
generated (see Section 14.18). We use the term "date_value" to
denote the value of the Date header, in a form appropriate for
arithmetic operations.
HTTP/1.1 uses the Age response-header to convey the estimated age of
the response message when obtained from a cache. The Age field value
is the cache's estimate of the amount of time since the response was
generated or revalidated by the origin server.
In essence, the Age value is the sum of the time that the response
has been resident in each of the caches along the path from the
origin server, plus the amount of time it has been in transit along
network paths.
We use the term "age_value" to denote the value of the Age header, in
a form appropriate for arithmetic operations.
A response's age can be calculated in two entirely independent ways:
1. now minus date_value, if the local clock is reasonably well
synchronized to the origin server's clock. If the result is
negative, the result is replaced by zero.
2. age_value, if all of the caches along the response path implement
HTTP/1.1.
Given that we have two independent ways to compute the age of a
response when it is received, we can combine these as
corrected_received_age = max(now - date_value, age_value)
and as long as we have either nearly synchronized clocks or all-
HTTP/1.1 paths, one gets a reliable (conservative) result.
Because of network-imposed delays, some significant interval might
pass between the time that a server generates a response and the time
it is received at the next outbound cache or client. If uncorrected,
this delay could result in improperly low ages.
Because the request that resulted in the returned Age value must have
been initiated prior to that Age value's generation, we can correct
for delays imposed by the network by recording the time at which the
request was initiated. Then, when an Age value is received, it MUST
be interpreted relative to the time the request was initiated, not
the time that the response was received. This algorithm results in
conservative behavior no matter how much delay is experienced. So,
we compute:
corrected_initial_age = corrected_received_age
+ (now - request_time)
where "request_time" is the time (according to the local clock) when
the request that elicited this response was sent.
Summary of age calculation algorithm, when a cache receives a
response:
/*
* age_value
* is the value of Age: header received by the cache with
* this response.
* date_value
* is the value of the origin server's Date: header
* request_time
* is the (local) time when the cache made the request
* that resulted in this cached response
* response_time
* is the (local) time when the cache received the
* response
* now
* is the current (local) time
*/
apparent_age = max(0, response_time - date_value);
corrected_received_age = max(apparent_age, age_value);
response_delay = response_time - request_time;
corrected_initial_age = corrected_received_age + response_delay;
resident_time = now - response_time;
current_age = corrected_initial_age + resident_time;
The current_age of a cache entry is calculated by adding the amount
of time (in seconds) since the cache entry was last validated by the
origin server to the corrected_initial_age. When a response is
generated from a cache entry, the cache MUST include a single Age
header field in the response with a value equal to the cache entry's
current_age.
The presence of an Age header field in a response implies that a
response is not first-hand. However, the converse is not true, since
the lack of an Age header field in a response does not imply that the
response is first-hand unless all caches along the request path are
compliant with HTTP/1.1 (i.e., older HTTP caches did not implement
the Age header field).
13.2.4. Expiration Calculations
In order to decide whether a response is fresh or stale, we need to
compare its freshness lifetime to its age. The age is calculated as
described in Section 13.2.3; this section describes how to calculate
the freshness lifetime, and to determine if a response has expired.
In the discussion below, the values can be represented in any form
appropriate for arithmetic operations.
We use the term "expires_value" to denote the value of the Expires
header. We use the term "max_age_value" to denote an appropriate
value of the number of seconds carried by the "max-age" directive of
the Cache-Control header in a response (see Section 14.9.3).
The max-age directive takes priority over Expires, so if max-age is
present in a response, the calculation is simply:
freshness_lifetime = max_age_value
Otherwise, if Expires is present in the response, the calculation is:
freshness_lifetime = expires_value - date_value
Note that neither of these calculations is vulnerable to clock skew,
since all of the information comes from the origin server.
If none of Expires, Cache-Control: max-age, or Cache-Control:
s-maxage (see Section 14.9.3) appears in the response, and the
response does not include other restrictions on caching, the cache
MAY compute a freshness lifetime using a heuristic. The cache MUST
attach Warning 113 to any response whose age is more than 24 hours if
such warning has not already been added.
Also, if the response does have a Last-Modified time, the heuristic
expiration value SHOULD be no more than some fraction of the interval
since that time. A typical setting of this fraction might be 10%.
The calculation to determine if a response has expired is quite
simple:
response_is_fresh = (freshness_lifetime > current_age)
13.2.5. Disambiguating Expiration Values
Because expiration values are assigned optimistically, it is possible
for two caches to contain fresh values for the same resource that are
different.
If a client performing a retrieval receives a non-first-hand response
for a request that was already fresh in its own cache, and the Date
header in its existing cache entry is newer than the Date on the new
response, then the client MAY ignore the response. If so, it MAY
retry the request with a "Cache-Control: max-age=0" directive (see
Section 14.9), to force a check with the origin server.
If a cache has two fresh responses for the same representation with
different validators, it MUST use the one with the more recent Date
header. This situation might arise because the cache is pooling
responses from other caches, or because a client has asked for a
reload or a revalidation of an apparently fresh cache entry.
13.2.6. Disambiguating Multiple Responses
Because a client might be receiving responses via multiple paths, so
that some responses flow through one set of caches and other
responses flow through a different set of caches, a client might
receive responses in an order different from that in which the origin
server sent them. We would like the client to use the most recently
generated response, even if older responses are still apparently
fresh.
Neither the entity tag nor the expiration value can impose an
ordering on responses, since it is possible that a later response
intentionally carries an earlier expiration time. The Date values
are ordered to a granularity of one second.
When a client tries to revalidate a cache entry, and the response it
receives contains a Date header that appears to be older than the one
for the existing entry, then the client SHOULD repeat the request
unconditionally, and include
Cache-Control: max-age=0
to force any intermediate caches to validate their copies directly
with the origin server, or
Cache-Control: no-cache
to force any intermediate caches to obtain a new copy from the origin
server.
If the Date values are equal, then the client MAY use either response
(or MAY, if it is being extremely prudent, request a new response).
Servers MUST NOT depend on clients being able to choose
deterministically between responses generated during the same second,
if their expiration times overlap.
13.3. Validation Model
When a cache has a stale entry that it would like to use as a
response to a client's request, it first has to check with the origin
server (or possibly an intermediate cache with a fresh response) to
see if its cached entry is still usable. We call this "validating"
the cache entry. Since we do not want to have to pay the overhead of
retransmitting the full response if the cached entry is good, and we
do not want to pay the overhead of an extra round trip if the cached
entry is invalid, the HTTP/1.1 protocol supports the use of
conditional methods.
The key protocol features for supporting conditional methods are
those concerned with "cache validators." When an origin server
generates a full response, it attaches some sort of validator to it,
which is kept with the cache entry. When a client (user agent or
proxy cache) makes a conditional request for a resource for which it
has a cache entry, it includes the associated validator in the
request.
The server then checks that validator against the current validator
for the entity, and, if they match (see Section 13.3.3), it responds
with a special status code (usually, 304 (Not Modified)) and no
entity-body. Otherwise, it returns a full response (including
entity-body). Thus, we avoid transmitting the full response if the
validator matches, and we avoid an extra round trip if it does not
match.
In HTTP/1.1, a conditional request looks exactly the same as a normal
request for the same resource, except that it carries a special
header (which includes the validator) that implicitly turns the
method (usually, GET) into a conditional.
The protocol includes both positive and negative senses of cache-
validating conditions. That is, it is possible to request either
that a method be performed if and only if a validator matches or if
and only if no validators match.
Note: a response that lacks a validator may still be cached, and
served from cache until it expires, unless this is explicitly
prohibited by a cache-control directive. However, a cache cannot
do a conditional retrieval if it does not have a validator for the
entity, which means it will not be refreshable after it expires.
13.3.1. Last-Modified Dates
The Last-Modified entity-header field value is often used as a cache
validator. In simple terms, a cache entry is considered to be valid
if the entity has not been modified since the Last-Modified value.
13.3.2. Entity Tag Cache Validators
The ETag response-header field value, an entity tag, provides for an
"opaque" cache validator. This might allow more reliable validation
in situations where it is inconvenient to store modification dates,
where the one-second resolution of HTTP date values is not
sufficient, or where the origin server wishes to avoid certain
paradoxes that might arise from the use of modification dates.
Entity Tags are described in Section 3.11. The headers used with
entity tags are described in sections 14.19, 14.24, 14.26 and 14.44.
13.3.3. Weak and Strong Validators
Since both origin servers and caches will compare two validators to
decide if they represent the same or different entities, one normally
would expect that if the entity (the entity-body or any entity-
headers) changes in any way, then the associated validator would
change as well. If this is true, then we call this validator a
"strong validator."
However, there might be cases when a server prefers to change the
validator only on semantically significant changes, and not when
insignificant aspects of the entity change. A validator that does
not always change when the resource changes is a "weak validator."
Entity tags are normally "strong validators," but the protocol
provides a mechanism to tag an entity tag as "weak." One can think
of a strong validator as one that changes whenever the bits of an
entity changes, while a weak value changes whenever the meaning of an
entity changes. Alternatively, one can think of a strong validator
as part of an identifier for a specific entity, while a weak
validator is part of an identifier for a set of semantically
equivalent entities.
Note: One example of a strong validator is an integer that is
incremented in stable storage every time an entity is changed.
An entity's modification time, if represented with one-second
resolution, could be a weak validator, since it is possible that
the resource might be modified twice during a single second.
Support for weak validators is optional. However, weak validators
allow for more efficient caching of equivalent objects; for
example, a hit counter on a site is probably good enough if it is
updated every few days or weeks, and any value during that period
is likely "good enough" to be equivalent.
A "use" of a validator is either when a client generates a request
and includes the validator in a validating header field, or when a
server compares two validators.
Strong validators are usable in any context. Weak validators are
only usable in contexts that do not depend on exact equality of an
entity. For example, either kind is usable for a conditional GET of
a full entity. However, only a strong validator is usable for a sub-
range retrieval, since otherwise the client might end up with an
internally inconsistent entity.
Clients MAY issue simple (non-subrange) GET requests with either weak
validators or strong validators. Clients MUST NOT use weak
validators in other forms of request.
The only function that the HTTP/1.1 protocol defines on validators is
comparison. There are two validator comparison functions, depending
on whether the comparison context allows the use of weak validators
or not:
o The strong comparison function: in order to be considered equal,
both validators MUST be identical in every way, and both MUST NOT
be weak.
o The weak comparison function: in order to be considered equal,
both validators MUST be identical in every way, but either or both
of them MAY be tagged as "weak" without affecting the result.
An entity tag is strong unless it is explicitly tagged as weak.
Section 3.11 gives the syntax for entity tags.
A Last-Modified time, when used as a validator in a request, is
implicitly weak unless it is possible to deduce that it is strong,
using the following rules:
o The validator is being compared by an origin server to the actual
current validator for the entity and,
o That origin server reliably knows that the associated entity did
not change twice during the second covered by the presented
validator.
or
o The validator is about to be used by a client in an If-Modified-
Since or If-Unmodified-Since header, because the client has a
cache entry for the associated entity, and
o That cache entry includes a Date value, which gives the time when
the origin server sent the original response, and
o The presented Last-Modified time is at least 60 seconds before the
Date value.
or
o The validator is being compared by an intermediate cache to the
validator stored in its cache entry for the entity, and
o That cache entry includes a Date value, which gives the time when
the origin server sent the original response, and
o The presented Last-Modified time is at least 60 seconds before the
Date value.
This method relies on the fact that if two different responses were
sent by the origin server during the same second, but both had the
same Last-Modified time, then at least one of those responses would
have a Date value equal to its Last-Modified time. The arbitrary 60-
second limit guards against the possibility that the Date and Last-
Modified values are generated from different clocks, or at somewhat
different times during the preparation of the response. An
implementation MAY use a value larger than 60 seconds, if it is
believed that 60 seconds is too short.
If a client wishes to perform a sub-range retrieval on a value for
which it has only a Last-Modified time and no opaque validator, it
MAY do this only if the Last-Modified time is strong in the sense
described here.
A cache or origin server receiving a conditional request, other than
a full-body GET request, MUST use the strong comparison function to
evaluate the condition.
These rules allow HTTP/1.1 caches and clients to safely perform sub-
range retrievals on values that have been obtained from HTTP/1.0
servers.
13.3.4. Rules for When to Use Entity Tags and Last-Modified Dates
We adopt a set of rules and recommendations for origin servers,
clients, and caches regarding when various validator types ought to
be used, and for what purposes.
HTTP/1.1 origin servers:
o SHOULD send an entity tag validator unless it is not feasible to
generate one.
o MAY send a weak entity tag instead of a strong entity tag, if
performance considerations support the use of weak entity tags, or
if it is unfeasible to send a strong entity tag.
o SHOULD send a Last-Modified value if it is feasible to send one,
unless the risk of a breakdown in semantic transparency that could
result from using this date in an If-Modified-Since header would
lead to serious problems.
In other words, the preferred behavior for an HTTP/1.1 origin server
is to send both a strong entity tag and a Last-Modified value.
In order to be legal, a strong entity tag MUST change whenever the
associated entity value changes in any way. A weak entity tag SHOULD
change whenever the associated entity changes in a semantically
significant way.
Note: in order to provide semantically transparent caching, an
origin server must avoid reusing a specific strong entity tag
value for two different entities, or reusing a specific weak
entity tag value for two semantically different entities. Cache
entries might persist for arbitrarily long periods, regardless of
expiration times, so it might be inappropriate to expect that a
cache will never again attempt to validate an entry using a
validator that it obtained at some point in the past.
HTTP/1.1 clients:
o If an entity tag has been provided by the origin server, MUST use
that entity tag in any cache-conditional request (using If-Match
or If-None-Match).
o If only a Last-Modified value has been provided by the origin
server, SHOULD use that value in non-subrange cache-conditional
requests (using If-Modified-Since).
o If only a Last-Modified value has been provided by an HTTP/1.0
origin server, MAY use that value in subrange cache-conditional
requests (using If-Unmodified-Since:). The user agent SHOULD
provide a way to disable this, in case of difficulty.
o If both an entity tag and a Last-Modified value have been provided
by the origin server, SHOULD use both validators in cache-
conditional requests. This allows both HTTP/1.0 and HTTP/1.1
caches to respond appropriately.
An HTTP/1.1 origin server, upon receiving a conditional request that
includes both a Last-Modified date (e.g., in an If-Modified-Since or
If-Unmodified-Since header field) and one or more entity tags (e.g.,
in an If-Match, If-None-Match, or If-Range header field) as cache
validators, MUST NOT return a response status of 304 (Not Modified)
unless doing so is consistent with all of the conditional header
fields in the request.
An HTTP/1.1 caching proxy, upon receiving a conditional request that
includes both a Last-Modified date and one or more entity tags as
cache validators, MUST NOT return a locally cached response to the
client unless that cached response is consistent with all of the
conditional header fields in the request.
Note: The general principle behind these rules is that HTTP/1.1
servers and clients should transmit as much non-redundant
information as is available in their responses and requests.
HTTP/1.1 systems receiving this information will make the most
conservative assumptions about the validators they receive.
HTTP/1.0 clients and caches will ignore entity tags. Generally,
last-modified values received or used by these systems will
support transparent and efficient caching, and so HTTP/1.1 origin
servers should provide Last-Modified values. In those rare cases
where the use of a Last-Modified value as a validator by an
HTTP/1.0 system could result in a serious problem, then HTTP/1.1
origin servers should not provide one.
13.3.5. Non-validating Conditionals
The principle behind entity tags is that only the service author
knows the semantics of a resource well enough to select an
appropriate cache validation mechanism, and the specification of any
validator comparison function more complex than byte-equality would
open up a can of worms. Thus, comparisons of any other headers
(except Last-Modified, for compatibility with HTTP/1.0) are never
used for purposes of validating a cache entry.
13.4. Response Cacheability
Unless specifically constrained by a cache-control (Section 14.9)
directive, a caching system MAY always store a successful response
(see Section 13.8) as a cache entry, MAY return it without validation
if it is fresh, and MAY return it after successful validation. If
there is neither a cache validator nor an explicit expiration time
associated with a response, we do not expect it to be cached, but
certain caches MAY violate this expectation (for example, when little
or no network connectivity is available). A client can usually
detect that such a response was taken from a cache by comparing the
Date header to the current time.
Note: some HTTP/1.0 caches are known to violate this expectation
without providing any Warning.
However, in some cases it might be inappropriate for a cache to
retain an entity, or to return it in response to a subsequent
request. This might be because absolute semantic transparency is
deemed necessary by the service author, or because of security or
privacy considerations. Certain cache-control directives are
therefore provided so that the server can indicate that certain
resource entities, or portions thereof, are not to be cached
regardless of other considerations.
Note that Section 14.8 normally prevents a shared cache from saving
and returning a response to a previous request if that request
included an Authorization header.
A response received with a status code of 200, 203, 206, 300, 301 or
410 MAY be stored by a cache and used in reply to a subsequent
request, subject to the expiration mechanism, unless a cache-control
directive prohibits caching. However, a cache that does not support
the Range and Content-Range headers MUST NOT cache 206 (Partial
Content) responses.
A response received with any other status code (e.g. status codes 302
and 307) MUST NOT be returned in a reply to a subsequent request
unless there are cache-control directives or another header(s) that
explicitly allow it. For example, these include the following: an
Expires header (Section 14.21); a "max-age", "s-maxage", "must-
revalidate", "proxy-revalidate", "public" or "private" cache-control
directive (Section 14.9).
13.5. Constructing Responses From Caches
The purpose of an HTTP cache is to store information received in
response to requests for use in responding to future requests. In
many cases, a cache simply returns the appropriate parts of a
response to the requester. However, if the cache holds a cache entry
based on a previous response, it might have to combine parts of a new
response with what is held in the cache entry.
13.5.1. End-to-end and Hop-by-hop Headers
For the purpose of defining the behavior of caches and non-caching
proxies, we divide HTTP headers into two categories:
o End-to-end headers, which are transmitted to the ultimate
recipient of a request or response. End-to-end headers in
responses MUST be stored as part of a cache entry and MUST be
transmitted in any response formed from a cache entry.
o Hop-by-hop headers, which are meaningful only for a single
transport-level connection, and are not stored by caches or
forwarded by proxies.
The following HTTP/1.1 headers are hop-by-hop headers:
o Connection
o Keep-Alive
o Proxy-Authenticate
o Proxy-Authorization
o TE
o Trailers
o Transfer-Encoding
o Upgrade
All other headers defined by HTTP/1.1 are end-to-end headers.
Other hop-by-hop headers MUST be listed in a Connection header,
(Section 14.10) to be introduced into HTTP/1.1 (or later).
13.5.2. Non-modifiable Headers
Some features of the HTTP/1.1 protocol, such as Digest
Authentication, depend on the value of certain end-to-end headers. A
transparent proxy SHOULD NOT modify an end-to-end header unless the
definition of that header requires or specifically allows that.
A transparent proxy MUST NOT modify any of the following fields in a
request or response, and it MUST NOT add any of these fields if not
already present:
o Content-Location
o Content-MD5
o ETag
o Last-Modified
A transparent proxy MUST NOT modify any of the following fields in a
response:
o Expires
but it MAY add any of these fields if not already present. If an
Expires header is added, it MUST be given a field-value identical to
that of the Date header in that response.
A proxy MUST NOT modify or add any of the following fields in a
message that contains the no-transform cache-control directive, or in
any request:
o Content-Encoding
o Content-Range
o Content-Type
A non-transparent proxy MAY modify or add these fields to a message
that does not include no-transform, but if it does so, it MUST add a
Warning 214 (Transformation applied) if one does not already appear
in the message (see Section 14.46).
Warning: unnecessary modification of end-to-end headers might
cause authentication failures if stronger authentication
mechanisms are introduced in later versions of HTTP. Such
authentication mechanisms MAY rely on the values of header fields
not listed here.
The Content-Length field of a request or response is added or deleted
according to the rules in Section 4.4. A transparent proxy MUST
preserve the entity-length (Section 7.2.2) of the entity-body,
although it MAY change the transfer-length (Section 4.4).
13.5.3. Combining Headers
When a cache makes a validating request to a server, and the server
provides a 304 (Not Modified) response or a 206 (Partial Content)
response, the cache then constructs a response to send to the
requesting client.
If the status code is 304 (Not Modified), the cache uses the entity-
body stored in the cache entry as the entity-body of this outgoing
response. If the status code is 206 (Partial Content) and the ETag
or Last-Modified headers match exactly, the cache MAY combine the
contents stored in the cache entry with the new contents received in
the response and use the result as the entity-body of this outgoing
response, (see 13.5.4).
The end-to-end headers stored in the cache entry are used for the
constructed response, except that
o any stored Warning headers with warn-code 1xx (see Section 14.46)
MUST be deleted from the cache entry and the forwarded response.
o any stored Warning headers with warn-code 2xx MUST be retained in
the cache entry and the forwarded response.
o any end-to-end headers provided in the 304 or 206 response MUST
replace the corresponding headers from the cache entry.
Unless the cache decides to remove the cache entry, it MUST also
replace the end-to-end headers stored with the cache entry with
corresponding headers received in the incoming response, except for
Warning headers as described immediately above. If a header field-
name in the incoming response matches more than one header in the
cache entry, all such old headers MUST be replaced.
In other words, the set of end-to-end headers received in the
incoming response overrides all corresponding end-to-end headers
stored with the cache entry (except for stored Warning headers with
warn-code 1xx, which are deleted even if not overridden).
Note: this rule allows an origin server to use a 304 (Not
Modified) or a 206 (Partial Content) response to update any header
associated with a previous response for the same entity or sub-
ranges thereof, although it might not always be meaningful or
correct to do so. This rule does not allow an origin server to
use a 304 (Not Modified) or a 206 (Partial Content) response to
entirely delete a header that it had provided with a previous
response.
13.5.4. Combining Byte Ranges
A response might transfer only a subrange of the bytes of an entity-
body, either because the request included one or more Range
specifications, or because a connection was broken prematurely.
After several such transfers, a cache might have received several
ranges of the same entity-body.
If a cache has a stored non-empty set of subranges for an entity, and
an incoming response transfers another subrange, the cache MAY
combine the new subrange with the existing set if both the following
conditions are met:
o Both the incoming response and the cache entry have a cache
validator.
o The two cache validators match using the strong comparison
function (see Section 13.3.3).
If either requirement is not met, the cache MUST use only the most
recent partial response (based on the Date values transmitted with
every response, and using the incoming response if these values are
equal or missing), and MUST discard the other partial information.
13.6. Caching Negotiated Responses
Use of server-driven content negotiation (Section 12.1), as indicated
by the presence of a Vary header field in a response, alters the
conditions and procedure by which a cache can use the response for
subsequent requests. See Section 14.44 for use of the Vary header
field by servers.
A server SHOULD use the Vary header field to inform a cache of what
request-header fields were used to select among multiple
representations of a cacheable response subject to server-driven
negotiation. The set of header fields named by the Vary field value
is known as the "selecting" request-headers.
When the cache receives a subsequent request whose Request-URI
specifies one or more cache entries including a Vary header field,
the cache MUST NOT use such a cache entry to construct a response to
the new request unless all of the selecting request-headers present
in the new request match the corresponding stored request-headers in
the original request.
The selecting request-headers from two requests are defined to match
if and only if the selecting request-headers in the first request can
be transformed to the selecting request-headers in the second request
by adding or removing linear white space (LWS) at places where this
is allowed by the corresponding BNF, and/or combining multiple
message-header fields with the same field name following the rules
about message headers in Section 4.2.
A Vary header field-value of "*" always fails to match and subsequent
requests on that resource can only be properly interpreted by the
origin server.
If the selecting request header fields for the cached entry do not
match the selecting request header fields of the new request, then
the cache MUST NOT use a cached entry to satisfy the request unless
it first relays the new request to the origin server in a conditional
request and the server responds with 304 (Not Modified), including an
entity tag or Content-Location that indicates the entity to be used.
If an entity tag was assigned to a cached representation, the
forwarded request SHOULD be conditional and include the entity tags
in an If-None-Match header field from all its cache entries for the
resource. This conveys to the server the set of entities currently
held by the cache, so that if any one of these entities matches the
requested entity, the server can use the ETag header field in its 304
(Not Modified) response to tell the cache which entry is appropriate.
If the entity-tag of the new response matches that of an existing
entry, the new response SHOULD be used to update the header fields of
the existing entry, and the result MUST be returned to the client.
If any of the existing cache entries contains only partial content
for the associated entity, its entity-tag SHOULD NOT be included in
the If-None-Match header field unless the request is for a range that
would be fully satisfied by that entry.
If a cache receives a successful response whose Content-Location
field matches that of an existing cache entry for the same Request-
URI, whose entity-tag differs from that of the existing entry, and
whose Date is more recent than that of the existing entry, the
existing entry SHOULD NOT be returned in response to future requests
and SHOULD be deleted from the cache.
13.7. Shared and Non-Shared Caches
For reasons of security and privacy, it is necessary to make a
distinction between "shared" and "non-shared" caches. A non-shared
cache is one that is accessible only to a single user. Accessibility
in this case SHOULD be enforced by appropriate security mechanisms.
All other caches are considered to be "shared." Other sections of
this specification place certain constraints on the operation of
shared caches in order to prevent loss of privacy or failure of
access controls.
13.8. Errors or Incomplete Response Cache Behavior
A cache that receives an incomplete response (for example, with fewer
bytes of data than specified in a Content-Length header) MAY store
the response. However, the cache MUST treat this as a partial
response. Partial responses MAY be combined as described in
Section 13.5.4; the result might be a full response or might still be
partial. A cache MUST NOT return a partial response to a client
without explicitly marking it as such, using the 206 (Partial
Content) status code. A cache MUST NOT return a partial response
using a status code of 200 (OK).
If a cache receives a 5xx response while attempting to revalidate an
entry, it MAY either forward this response to the requesting client,
or act as if the server failed to respond. In the latter case, it
MAY return a previously received response unless the cached entry
includes the "must-revalidate" cache-control directive (see
Section 14.9).
13.9. Side Effects of GET and HEAD
Unless the origin server explicitly prohibits the caching of their
responses, the application of GET and HEAD methods to any resources
SHOULD NOT have side effects that would lead to erroneous behavior if
these responses are taken from a cache. They MAY still have side
effects, but a cache is not required to consider such side effects in
its caching decisions. Caches are always expected to observe an
origin server's explicit restrictions on caching.
We note one exception to this rule: since some applications have
traditionally used GETs and HEADs with query URLs (those containing a
"?" in the rel_path part) to perform operations with significant side
effects, caches MUST NOT treat responses to such URIs as fresh unless
the server provides an explicit expiration time. This specifically
means that responses from HTTP/1.0 servers for such URIs SHOULD NOT
be taken from a cache. See Section 9.1.1 for related information.
13.10. Invalidation After Updates or Deletions
The effect of certain methods performed on a resource at the origin
server might cause one or more existing cache entries to become non-
transparently invalid. That is, although they might continue to be
"fresh," they do not accurately reflect what the origin server would
return for a new request on that resource.
There is no way for the HTTP protocol to guarantee that all such
cache entries are marked invalid. For example, the request that
caused the change at the origin server might not have gone through
the proxy where a cache entry is stored. However, several rules help
reduce the likelihood of erroneous behavior.
In this section, the phrase "invalidate an entity" means that the
cache will either remove all instances of that entity from its
storage, or will mark these as "invalid" and in need of a mandatory
revalidation before they can be returned in response to a subsequent
request.
Some HTTP methods MUST cause a cache to invalidate an entity. This
is either the entity referred to by the Request-URI, or by the
Location or Content-Location headers (if present). These methods
are:
o PUT
o DELETE
o POST
In order to prevent denial of service attacks, an invalidation based
on the URI in a Location or Content-Location header MUST only be
performed if the host part is the same as in the Request-URI.
A cache that passes through requests for methods it does not
understand SHOULD invalidate any entities referred to by the Request-
URI.
13.11. Write-Through Mandatory
All methods that might be expected to cause modifications to the
origin server's resources MUST be written through to the origin
server. This currently includes all methods except for GET and HEAD.
A cache MUST NOT reply to such a request from a client before having
transmitted the request to the inbound server, and having received a
corresponding response from the inbound server. This does not
prevent a proxy cache from sending a 100 (Continue) response before
the inbound server has sent its final reply.
The alternative (known as "write-back" or "copy-back" caching) is not
allowed in HTTP/1.1, due to the difficulty of providing consistent
updates and the problems arising from server, cache, or network
failure prior to write-back.
13.12. Cache Replacement
If a new cacheable (see sections 14.9.2, 13.2.5, 13.2.6 and 13.8)
response is received from a resource while any existing responses for
the same resource are cached, the cache SHOULD use the new response
to reply to the current request. It MAY insert it into cache storage
and MAY, if it meets all other requirements, use it to respond to any
future requests that would previously have caused the old response to
be returned. If it inserts the new response into cache storage the
rules in Section 13.5.3 apply.
Note: a new response that has an older Date header value than
existing cached responses is not cacheable.
13.13. History Lists
User agents often have history mechanisms, such as "Back" buttons and
history lists, which can be used to redisplay an entity retrieved
earlier in a session.
History mechanisms and caches are different. In particular history
mechanisms SHOULD NOT try to show a semantically transparent view of
the current state of a resource. Rather, a history mechanism is
meant to show exactly what the user saw at the time when the resource
was retrieved.
By default, an expiration time does not apply to history mechanisms.
If the entity is still in storage, a history mechanism SHOULD display
it even if the entity has expired, unless the user has specifically
configured the agent to refresh expired history documents.
This is not to be construed to prohibit the history mechanism from
telling the user that a view might be stale.
Note: if history list mechanisms unnecessarily prevent users from
viewing stale resources, this will tend to force service authors
to avoid using HTTP expiration controls and cache controls when
they would otherwise like to. Service authors may consider it
important that users not be presented with error messages or
warning messages when they use navigation controls (such as BACK)
to view previously fetched resources. Even though sometimes such
resources ought not to cached, or ought to expire quickly, user
interface considerations may force service authors to resort to
other means of preventing caching (e.g. "once-only" URLs) in order
not to suffer the effects of improperly functioning history
mechanisms.
14. Header Field Definitions
This section defines the syntax and semantics of all standard This section defines the syntax and semantics of all standard
HTTP/1.1 header fields. For entity-header fields, both sender and HTTP/1.1 header fields. For entity-header fields, both sender and
recipient refer to either the client or the server, depending on who recipient refer to either the client or the server, depending on who
sends and who receives the entity. sends and who receives the entity.
14.1. Accept 8.1. Connection
The Accept request-header field can be used to specify certain media
types which are acceptable for the response. Accept headers can be
used to indicate that the request is specifically limited to a small
set of desired types, as in the case of a request for an in-line
image.
Accept = "Accept" ":"
#( media-range [ accept-params ] )
media-range = ( "*/*"
| ( type "/" "*" )
| ( type "/" subtype )
) *( ";" parameter )
accept-params = ";" "q" "=" qvalue *( accept-extension )
accept-extension = ";" token [ "=" ( token | quoted-string ) ]
The asterisk "*" character is used to group media types into ranges,
with "*/*" indicating all media types and "type/*" indicating all
subtypes of that type. The media-range MAY include media type
parameters that are applicable to that range.
Each media-range MAY be followed by one or more accept-params,
beginning with the "q" parameter for indicating a relative quality
factor. The first "q" parameter (if any) separates the media-range
parameter(s) from the accept-params. Quality factors allow the user
or user agent to indicate the relative degree of preference for that
media-range, using the qvalue scale from 0 to 1 (Section 3.9). The
default value is q=1.
Note: Use of the "q" parameter name to separate media type
parameters from Accept extension parameters is due to historical
practice. Although this prevents any media type parameter named
"q" from being used with a media range, such an event is believed
to be unlikely given the lack of any "q" parameters in the IANA
media type registry and the rare usage of any media type
parameters in Accept. Future media types are discouraged from
registering any parameter named "q".
The example
Accept: audio/*; q=0.2, audio/basic
SHOULD be interpreted as "I prefer audio/basic, but send me any audio
type if it is the best available after an 80% mark-down in quality."
If no Accept header field is present, then it is assumed that the
client accepts all media types. If an Accept header field is
present, and if the server cannot send a response which is acceptable
according to the combined Accept field value, then the server SHOULD
send a 406 (not acceptable) response.
A more elaborate example is
Accept: text/plain; q=0.5, text/html,
text/x-dvi; q=0.8, text/x-c
Verbally, this would be interpreted as "text/html and text/x-c are
the preferred media types, but if they do not exist, then send the
text/x-dvi entity, and if that does not exist, send the text/plain
entity."
Media ranges can be overridden by more specific media ranges or
specific media types. If more than one media range applies to a
given type, the most specific reference has precedence. For example,
Accept: text/*, text/html, text/html;level=1, */*
have the following precedence:
1) text/html;level=1
2) text/html
3) text/*
4) */*
The media type quality factor associated with a given type is
determined by finding the media range with the highest precedence
which matches that type. For example,
Accept: text/*;q=0.3, text/html;q=0.7, text/html;level=1,
text/html;level=2;q=0.4, */*;q=0.5
would cause the following values to be associated:
text/html;level=1 = 1
text/html = 0.7
text/plain = 0.3
image/jpeg = 0.5
text/html;level=2 = 0.4
text/html;level=3 = 0.7
Note: A user agent might be provided with a default set of quality
values for certain media ranges. However, unless the user agent is a
closed system which cannot interact with other rendering agents, this
default set ought to be configurable by the user.
14.2. Accept-Charset
The Accept-Charset request-header field can be used to indicate what
character sets are acceptable for the response. This field allows
clients capable of understanding more comprehensive or special-
purpose character sets to signal that capability to a server which is
capable of representing documents in those character sets.
Accept-Charset = "Accept-Charset" ":"
1#( ( charset | "*" )[ ";" "q" "=" qvalue ] )
Character set values are described in Section 3.4. Each charset MAY
be given an associated quality value which represents the user's
preference for that charset. The default value is q=1. An example
is
Accept-Charset: iso-8859-5, unicode-1-1;q=0.8
The special value "*", if present in the Accept-Charset field,
matches every character set (including ISO-8859-1) which is not
mentioned elsewhere in the Accept-Charset field. If no "*" is
present in an Accept-Charset field, then all character sets not
explicitly mentioned get a quality value of 0, except for ISO-8859-1,
which gets a quality value of 1 if not explicitly mentioned.
If no Accept-Charset header is present, the default is that any
character set is acceptable. If an Accept-Charset header is present,
and if the server cannot send a response which is acceptable
according to the Accept-Charset header, then the server SHOULD send
an error response with the 406 (not acceptable) status code, though
the sending of an unacceptable response is also allowed.
14.3. Accept-Encoding
The Accept-Encoding request-header field is similar to Accept, but
restricts the content-codings (Section 3.5) that are acceptable in
the response.
Accept-Encoding = "Accept-Encoding" ":"
1#( codings [ ";" "q" "=" qvalue ] )
codings = ( content-coding | "*" )
Examples of its use are:
Accept-Encoding: compress, gzip
Accept-Encoding:
Accept-Encoding: *
Accept-Encoding: compress;q=0.5, gzip;q=1.0
Accept-Encoding: gzip;q=1.0, identity; q=0.5, *;q=0
A server tests whether a content-coding is acceptable, according to
an Accept-Encoding field, using these rules:
1. If the content-coding is one of the content-codings listed in the
Accept-Encoding field, then it is acceptable, unless it is
accompanied by a qvalue of 0. (As defined in Section 3.9, a
qvalue of 0 means "not acceptable.")
2. The special "*" symbol in an Accept-Encoding field matches any
available content-coding not explicitly listed in the header
field.
3. If multiple content-codings are acceptable, then the acceptable
content-coding with the highest non-zero qvalue is preferred.
4. The "identity" content-coding is always acceptable, unless
specifically refused because the Accept-Encoding field includes
"identity;q=0", or because the field includes "*;q=0" and does
not explicitly include the "identity" content-coding. If the
Accept-Encoding field-value is empty, then only the "identity"
encoding is acceptable.
If an Accept-Encoding field is present in a request, and if the
server cannot send a response which is acceptable according to the
Accept-Encoding header, then the server SHOULD send an error response
with the 406 (Not Acceptable) status code.
If no Accept-Encoding field is present in a request, the server MAY
assume that the client will accept any content coding. In this case,
if "identity" is one of the available content-codings, then the
server SHOULD use the "identity" content-coding, unless it has
additional information that a different content-coding is meaningful
to the client.
Note: If the request does not include an Accept-Encoding field,
and if the "identity" content-coding is unavailable, then content-
codings commonly understood by HTTP/1.0 clients (i.e., "gzip" and
"compress") are preferred; some older clients improperly display
messages sent with other content-codings. The server might also
make this decision based on information about the particular user-
agent or client.
Note: Most HTTP/1.0 applications do not recognize or obey qvalues
associated with content-codings. This means that qvalues will not
work and are not permitted with x-gzip or x-compress.
14.4. Accept-Language
The Accept-Language request-header field is similar to Accept, but
restricts the set of natural languages that are preferred as a
response to the request. Language tags are defined in Section 3.10.
Accept-Language = "Accept-Language" ":"
1#( language-range [ ";" "q" "=" qvalue ] )
language-range = ( ( 1*8ALPHA *( "-" 1*8ALPHA ) ) | "*" )
Each language-range MAY be given an associated quality value which
represents an estimate of the user's preference for the languages
specified by that range. The quality value defaults to "q=1". For
example,
Accept-Language: da, en-gb;q=0.8, en;q=0.7
would mean: "I prefer Danish, but will accept British English and
other types of English." A language-range matches a language-tag if
it exactly equals the tag, or if it exactly equals a prefix of the
tag such that the first tag character following the prefix is "-".
The special range "*", if present in the Accept-Language field,
matches every tag not matched by any other range present in the
Accept-Language field.
Note: This use of a prefix matching rule does not imply that
language tags are assigned to languages in such a way that it is
always true that if a user understands a language with a certain
tag, then this user will also understand all languages with tags
for which this tag is a prefix. The prefix rule simply allows the
use of prefix tags if this is the case.
The language quality factor assigned to a language-tag by the Accept-
Language field is the quality value of the longest language-range in
the field that matches the language-tag. If no language-range in the
field matches the tag, the language quality factor assigned is 0. If
no Accept-Language header is present in the request, the server
SHOULD assume that all languages are equally acceptable. If an
Accept-Language header is present, then all languages which are
assigned a quality factor greater than 0 are acceptable.
It might be contrary to the privacy expectations of the user to send
an Accept-Language header with the complete linguistic preferences of
the user in every request. For a discussion of this issue, see
Section 15.1.4.
As intelligibility is highly dependent on the individual user, it is
recommended that client applications make the choice of linguistic
preference available to the user. If the choice is not made
available, then the Accept-Language header field MUST NOT be given in
the request.
Note: When making the choice of linguistic preference available to
the user, we remind implementors of the fact that users are not
familiar with the details of language matching as described above,
and should provide appropriate guidance. As an example, users
might assume that on selecting "en-gb", they will be served any
kind of English document if British English is not available. A
user agent might suggest in such a case to add "en" to get the
best matching behavior.
14.5. Accept-Ranges
The Accept-Ranges response-header field allows the server to indicate
its acceptance of range requests for a resource:
Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges
acceptable-ranges = 1#range-unit | "none"
Origin servers that accept byte-range requests MAY send
Accept-Ranges: bytes
but are not required to do so. Clients MAY generate byte-range
requests without having received this header for the resource
involved. Range units are defined in Section 3.12.
Servers that do not accept any kind of range request for a resource
MAY send
Accept-Ranges: none
to advise the client not to attempt a range request.
14.6. Age
The Age response-header field conveys the sender's estimate of the
amount of time since the response (or its revalidation) was generated
at the origin server. A cached response is "fresh" if its age does
not exceed its freshness lifetime. Age values are calculated as
specified in Section 13.2.3.
Age = "Age" ":" age-value
age-value = delta-seconds
Age values are non-negative decimal integers, representing time in
seconds.
If a cache receives a value larger than the largest positive integer
it can represent, or if any of its age calculations overflows, it
MUST transmit an Age header with a value of 2147483648 (2^31). An
HTTP/1.1 server that includes a cache MUST include an Age header
field in every response generated from its own cache. Caches SHOULD
use an arithmetic type of at least 31 bits of range.
14.7. Allow
The Allow entity-header field lists the set of methods supported by
the resource identified by the Request-URI. The purpose of this
field is strictly to inform the recipient of valid methods associated
with the resource. An Allow header field MUST be present in a 405
(Method Not Allowed) response.
Allow = "Allow" ":" #Method
Example of use:
Allow: GET, HEAD, PUT
This field cannot prevent a client from trying other methods.
However, the indications given by the Allow header field value SHOULD
be followed. The actual set of allowed methods is defined by the
origin server at the time of each request.
The Allow header field MAY be provided with a PUT request to
recommend the methods to be supported by the new or modified
resource. The server is not required to support these methods and