|HTTPbis Working Group||R. Fielding, Editor|
|Obsoletes: 2616 (if approved)||J. Gettys|
|Updates: 2817 (if approved)||Alcatel-Lucent|
|Intended status: Standards Track||J. Mogul|
|Expires: January 13, 2011||HP|
|Y. Lafon, Editor|
|J. Reschke, Editor|
|July 12, 2010|
HTTP/1.1, part 2: Message Semantics
The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypermedia information systems. HTTP has been in use by the World Wide Web global information initiative since 1990. This document is Part 2 of the seven-part specification that defines the protocol referred to as "HTTP/1.1" and, taken together, obsoletes RFC 2616. Part 2 defines the semantics of HTTP messages as expressed by request methods, request-header fields, response status codes, and response-header fields.
Discussion of this draft should take place on the HTTPBIS working group mailing list (email@example.com). The current issues list is at <http://tools.ietf.org/wg/httpbis/trac/report/11> and related documents (including fancy diffs) can be found at <http://tools.ietf.org/wg/httpbis/>.
The changes in this draft are summarized in Appendix C.12.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.
This Internet-Draft will expire in January 13, 2011.
Copyright © 2010 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.
This document defines HTTP/1.1 request and response semantics. Each HTTP message, as defined in [Part1], is in the form of either a request or a response. An HTTP server listens on a connection for HTTP requests and responds to each request, in the order received on that connection, with one or more HTTP response messages. This document defines the commonly agreed upon semantics of the HTTP uniform interface, the intentions defined by each request method, and the various response messages that might be expected as a result of applying that method for the requested resource.
This document is currently disorganized in order to minimize the changes between drafts and enable reviewers to see the smaller errata changes. The next draft will reorganize the sections to better reflect the content. In particular, the sections will be ordered according to the typical processing of an HTTP request message (after message parsing): resource mapping, general header fields, methods, request modifiers, response status, and resource metadata. The current mess reflects how widely dispersed these topics and associated requirements had become in [RFC2616].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
An implementation is not compliant if it fails to satisfy one or more of the "MUST" or "REQUIRED" level requirements for the protocols it implements. An implementation that satisfies all the "MUST" or "REQUIRED" level and all the "SHOULD" level requirements for its protocols is said to be "unconditionally compliant"; one that satisfies all the "MUST" level requirements but not all the "SHOULD" level requirements for its protocols is said to be "conditionally compliant".
This specification uses the ABNF syntax defined in Section 1.2 of [Part1] (which extends the syntax defined in [RFC5234] with a list rule). Appendix B shows the collected ABNF, with the list rule expanded.
The following core rules are included by reference, as defined in [RFC5234], Appendix B.1: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), VCHAR (any visible USASCII character), and WSP (whitespace).
The core rules below are defined in Section 1.2.2 of [Part1]:
quoted-string = <quoted-string, defined in [Part1], Section 1.2.2> token = <token, defined in [Part1], Section 1.2.2> OWS = <OWS, defined in [Part1], Section 1.2.2> RWS = <RWS, defined in [Part1], Section 1.2.2> obs-text = <obs-text, defined in [Part1], Section 1.2.2>
The ABNF rules below are defined in other parts:
absolute-URI = <absolute-URI, defined in [Part1], Section 2.6> comment = <comment, defined in [Part1], Section 3.2> Host = <Host, defined in [Part1], Section 2.6> HTTP-date = <HTTP-date, defined in [Part1], Section 6.1> partial-URI = <partial-URI, defined in [Part1], Section 2.6> product = <product, defined in [Part1], Section 6.3> TE = <TE, defined in [Part1], Section 9.5> URI-reference = <URI-reference, defined in [Part1], Section 2.6>
Accept = <Accept, defined in [Part3], Section 5.1> Accept-Charset = <Accept-Charset, defined in [Part3], Section 5.2> Accept-Encoding = <Accept-Encoding, defined in [Part3], Section 5.3> Accept-Language = <Accept-Language, defined in [Part3], Section 5.4>
ETag = <ETag, defined in [Part4], Section 6.1> If-Match = <If-Match, defined in [Part4], Section 6.2> If-Modified-Since = <If-Modified-Since, defined in [Part4], Section 6.3> If-None-Match = <If-None-Match, defined in [Part4], Section 6.4> If-Unmodified-Since = <If-Unmodified-Since, defined in [Part4], Section 6.5>
Accept-Ranges = <Accept-Ranges, defined in [Part5], Section 5.1> If-Range = <If-Range, defined in [Part5], Section 5.3> Range = <Range, defined in [Part5], Section 5.4>
Age = <Age, defined in [Part6], Section 3.1> Vary = <Vary, defined in [Part6], Section 3.5>
Authorization = <Authorization, defined in [Part7], Section 3.1> Proxy-Authenticate = <Proxy-Authenticate, defined in [Part7], Section 3.2> Proxy-Authorization = <Proxy-Authorization, defined in [Part7], Section 3.3> WWW-Authenticate = <WWW-Authenticate, defined in [Part7], Section 3.4>
The Method token indicates the method to be performed on the resource identified by the Effective Request URI (Section 4.3 of [Part1]). The method is case-sensitive.
Method = %x4F.22.214.171.124F.4E.53 ; "OPTIONS", Section 7.2 / %x47.45.54 ; "GET", Section 7.3 / %x126.96.36.199 ; "HEAD", Section 7.4 / %x50.4F.53.54 ; "POST", Section 7.5 / %x50.55.54 ; "PUT", Section 7.6 / %x44.45.4C.45.54.45 ; "DELETE", Section 7.7 / %x188.8.131.52.45 ; "TRACE", Section 7.8 / %x43.4F.4E.4E.45.43.54 ; "CONNECT", Section 7.9 / extension-method extension-method = token
The list of methods allowed by a resource can be specified in an Allow header field (Section 9.1). The return code of the response always notifies the client whether a method is currently allowed on a resource, since the set of allowed methods can change dynamically. An origin server SHOULD return the status code 405 (Method Not Allowed) if the method is known by the origin server but not allowed for the requested resource, and 501 (Not Implemented) if the method is unrecognized or not implemented by the origin server. The methods GET and HEAD MUST be supported by all general-purpose servers. All other methods are OPTIONAL; however, if the above methods are implemented, they MUST be implemented with the same semantics as those specified in Section 7.
The HTTP Method Registry defines the name space for the Method token in the Request line of an HTTP request.
Registrations MUST include the following fields:
Values to be added to this name space are subject to IETF review ([RFC5226], Section 4.1).
The registry itself is maintained at <http://www.iana.org/assignments/http-methods>.
The request-header fields allow the client to pass additional information about the request, and about the client itself, to the server. These fields act as request modifiers, with semantics equivalent to the parameters on a programming language method invocation.
request-header = Accept ; [Part3], Section 5.1 / Accept-Charset ; [Part3], Section 5.2 / Accept-Encoding ; [Part3], Section 5.3 / Accept-Language ; [Part3], Section 5.4 / Authorization ; [Part7], Section 3.1 / Expect ; Section 9.2 / From ; Section 9.3 / Host ; [Part1], Section 9.4 / If-Match ; [Part4], Section 6.2 / If-Modified-Since ; [Part4], Section 6.3 / If-None-Match ; [Part4], Section 6.4 / If-Range ; [Part5], Section 5.3 / If-Unmodified-Since ; [Part4], Section 6.5 / Max-Forwards ; Section 9.5 / Proxy-Authorization ; [Part7], Section 3.3 / Range ; [Part5], Section 5.4 / Referer ; Section 9.6 / TE ; [Part1], Section 9.5 / User-Agent ; Section 9.9
Request-header field names can be extended reliably only in combination with a change in the protocol version. However, new or experimental header fields MAY be given the semantics of request-header fields if all parties in the communication recognize them to be request-header fields. Unrecognized header fields are treated as entity-header fields.
The Status-Code element is a 3-digit integer result code of the attempt to understand and satisfy the request. The status codes listed below are defined in Section 8, Section 3 of [Part4], Section 3 of [Part5], and Section 2 of [Part7].
The Reason-Phrase is intended to give a short textual description of the Status-Code. The Status-Code is intended for use by automata and the Reason-Phrase is intended for the human user. The client is not required to examine or display the Reason-Phrase.
The individual values of the numeric status codes defined for HTTP/1.1, and an example set of corresponding Reason-Phrase values, are presented below. The reason phrases listed here are only recommendations -- they MAY be replaced by local equivalents without affecting the protocol.
Status-Code = "100" ; Section 8.1.1: Continue / "101" ; Section 8.1.2: Switching Protocols / "200" ; Section 8.2.1: OK / "201" ; Section 8.2.2: Created / "202" ; Section 8.2.3: Accepted / "203" ; Section 8.2.4: Non-Authoritative Information / "204" ; Section 8.2.5: No Content / "205" ; Section 8.2.6: Reset Content / "206" ; [Part5], Section 3.1: Partial Content / "300" ; Section 8.3.1: Multiple Choices / "301" ; Section 8.3.2: Moved Permanently / "302" ; Section 8.3.3: Found / "303" ; Section 8.3.4: See Other / "304" ; [Part4], Section 3.1: Not Modified / "305" ; Section 8.3.6: Use Proxy / "307" ; Section 8.3.8: Temporary Redirect / "400" ; Section 8.4.1: Bad Request / "401" ; [Part7], Section 2.1: Unauthorized / "402" ; Section 8.4.3: Payment Required / "403" ; Section 8.4.4: Forbidden / "404" ; Section 8.4.5: Not Found / "405" ; Section 8.4.6: Method Not Allowed / "406" ; Section 8.4.7: Not Acceptable / "407" ; [Part7], Section 2.2: Proxy Authentication Required / "408" ; Section 8.4.9: Request Time-out / "409" ; Section 8.4.10: Conflict / "410" ; Section 8.4.11: Gone / "411" ; Section 8.4.12: Length Required / "412" ; [Part4], Section 3.2: Precondition Failed / "413" ; Section 8.4.14: Request Entity Too Large / "414" ; Section 8.4.15: URI Too Long / "415" ; Section 8.4.16: Unsupported Media Type / "416" ; [Part5], Section 3.2: Requested range not satisfiable / "417" ; Section 8.4.18: Expectation Failed / "500" ; Section 8.5.1: Internal Server Error / "501" ; Section 8.5.2: Not Implemented / "502" ; Section 8.5.3: Bad Gateway / "503" ; Section 8.5.4: Service Unavailable / "504" ; Section 8.5.5: Gateway Time-out / "505" ; Section 8.5.6: HTTP Version not supported / extension-code extension-code = 3DIGIT Reason-Phrase = *( WSP / VCHAR / obs-text )
HTTP status codes are extensible. HTTP applications are not required to understand the meaning of all registered status codes, though such understanding is obviously desirable. However, applications MUST understand the class of any status code, as indicated by the first digit, and treat any unrecognized response as being equivalent to the x00 status code of that class, with the exception that an unrecognized response MUST NOT be cached. For example, if an unrecognized status code of 431 is received by the client, it can safely assume that there was something wrong with its request and treat the response as if it had received a 400 status code. In such cases, user agents SHOULD present to the user the entity returned with the response, since that entity is likely to include human-readable information which will explain the unusual status.
The HTTP Status Code Registry defines the name space for the Status-Code token in the Status line of an HTTP response.
Values to be added to this name space are subject to IETF review ([RFC5226], Section 4.1).
The registry itself is maintained at <http://www.iana.org/assignments/http-status-codes>.
The response-header fields allow the server to pass additional information about the response which cannot be placed in the Status-Line. These header fields give information about the server and about further access to the resource identified by the Effective Request URI (Section 4.3 of [Part1]).
response-header = Accept-Ranges ; [Part5], Section 5.1 / Age ; [Part6], Section 3.1 / Allow ; Section 9.1 / ETag ; [Part4], Section 6.1 / Location ; Section 9.4 / Proxy-Authenticate ; [Part7], Section 3.2 / Retry-After ; Section 9.7 / Server ; Section 9.8 / Vary ; [Part6], Section 3.5 / WWW-Authenticate ; [Part7], Section 3.4
Response-header field names can be extended reliably only in combination with a change in the protocol version. However, new or experimental header fields MAY be given the semantics of response-header fields if all parties in the communication recognize them to be response-header fields. Unrecognized header fields are treated as entity-header fields.
Request and Response messages MAY transfer an entity if not otherwise restricted by the request method or response status code. An entity consists of entity-header fields and an entity-body, although some responses will only include the entity-headers. HTTP entity-body and entity-header fields are defined in [Part3].
An entity-body is only present in a message when a message-body is present, as described in Section 3.3 of [Part1]. The entity-body is obtained from the message-body by decoding any Transfer-Encoding that might have been applied to ensure safe and proper transfer of the message.
It is sometimes necessary to determine the identity of the resource associated with a representation.
An HTTP request representation, when present, is always associated with an anonymous (i.e., unidentified) resource.
In the common case, an HTTP response is a representation of the resource located at the Effective Request URI (see Section 4.3 of [Part1]). However, this is not always the case. To determine the URI of the resource a response is associated with, the following rules are used (with the first applicable one being selected):
[TODO-req-uri: The comparison function is going to have to be defined somewhere, because we already need to compare URIs for things like cache invalidation.]
The set of common methods for HTTP/1.1 is defined below. Although this set can be expanded, additional methods cannot be assumed to share the same semantics for separately extended clients and servers.
Implementors should be aware that the software represents the user in their interactions over the Internet, and should be careful to allow the user to be aware of any actions they might take which may have an unexpected significance to themselves or others.
In particular, the convention has been established that the GET, HEAD, OPTIONS, and TRACE methods SHOULD NOT have the significance of taking an action other than retrieval. These methods ought to be considered "safe". This allows user agents to represent other methods, such as POST, PUT and DELETE, in a special way, so that the user is made aware of the fact that a possibly unsafe action is being requested.
Naturally, it is not possible to ensure that the server does not generate side-effects as a result of performing a GET request; in fact, some dynamic resources consider that a feature. The important distinction here is that the user did not request the side-effects, so therefore cannot be held accountable for them.
Methods can also have the property of "idempotence" in that, aside from error or expiration issues, the intended effect of multiple identical requests is the same as for a single request. The methods PUT, DELETE, and all safe methods are idempotent. It is important to note that idempotence refers only to changes requested by the client: a server is free to change its state due to multiple requests for the purpose of tracking those requests, versioning of results, etc.
The OPTIONS method represents a request for information about the communication options available on the request/response chain identified by the Effective Request URI. This method allows the client to determine the options and/or requirements associated with a resource, or the capabilities of a server, without implying a resource action or initiating a resource retrieval.
Responses to this method are not cacheable.
If the OPTIONS request includes an entity-body (as indicated by the presence of Content-Length or Transfer-Encoding), then the media type MUST be indicated by a Content-Type field. Although this specification does not define any use for such a body, future extensions to HTTP might use the OPTIONS body to make more detailed queries on the server.
If the request-target is an asterisk ("*"), the OPTIONS request is intended to apply to the server in general rather than to a specific resource. Since a server's communication options typically depend on the resource, the "*" request is only useful as a "ping" or "no-op" type of method; it does nothing beyond allowing the client to test the capabilities of the server. For example, this can be used to test a proxy for HTTP/1.1 compliance (or lack thereof).
If the request-target is not an asterisk, the OPTIONS request applies only to the options that are available when communicating with that resource.
A 200 response SHOULD include any header fields that indicate optional features implemented by the server and applicable to that resource (e.g., Allow), possibly including extensions not defined by this specification. The response body, if any, SHOULD also include information about the communication options. The format for such a body is not defined by this specification, but might be defined by future extensions to HTTP. Content negotiation MAY be used to select the appropriate response format. If no response body is included, the response MUST include a Content-Length field with a field-value of "0".
The Max-Forwards request-header field MAY be used to target a specific proxy in the request chain. When a proxy receives an OPTIONS request on an absolute-URI for which request forwarding is permitted, the proxy MUST check for a Max-Forwards field. If the Max-Forwards field-value is zero ("0"), the proxy MUST NOT forward the message; instead, the proxy SHOULD respond with its own communication options. If the Max-Forwards field-value is an integer greater than zero, the proxy MUST decrement the field-value when it forwards the request. If no Max-Forwards field is present in the request, then the forwarded request MUST NOT include a Max-Forwards field.
The GET method means retrieve whatever information (in the form of an entity) currently corresponds to the resource identified by the Effective Request URI.
If the Effective Request URI identifies a data-producing process, it is the produced data which shall be returned as the entity in the response and not the source text of the process, unless that text happens to be the output of the process.
The semantics of the GET method change to a "conditional GET" if the request message includes an If-Modified-Since, If-Unmodified-Since, If-Match, If-None-Match, or If-Range header field. A conditional GET method requests that the entity be transferred only under the circumstances described by the conditional header field(s). The conditional GET method is intended to reduce unnecessary network usage by allowing cached entities to be refreshed without requiring multiple requests or transferring data already held by the client.
The semantics of the GET method change to a "partial GET" if the request message includes a Range header field. A partial GET requests that only part of the entity be transferred, as described in Section 5.4 of [Part5]. The partial GET method is intended to reduce unnecessary network usage by allowing partially-retrieved entities to be completed without transferring data already held by the client.
The response to a GET request is cacheable if and only if it meets the requirements for HTTP caching described in [Part6].
See Section 11.2 for security considerations when used for forms.
The HEAD method is identical to GET except that the server MUST NOT return a message-body in the response. The metainformation contained in the HTTP headers in response to a HEAD request SHOULD be identical to the information sent in response to a GET request. This method can be used for obtaining metainformation about the entity implied by the request without transferring the entity-body itself. This method is often used for testing hypertext links for validity, accessibility, and recent modification.
The response to a HEAD request MAY be cacheable in the sense that the information contained in the response MAY be used to update a previously cached entity from that resource. If the new field values indicate that the cached entity differs from the current entity (as would be indicated by a change in Content-Length, Content-MD5, ETag or Last-Modified), then the cache MUST treat the cache entry as stale.
The POST method is used to request that the origin server accept the entity enclosed in the request as data to be processed by the resource identified by the Effective Request URI. POST is designed to allow a uniform method to cover the following functions:
The actual function performed by the POST method is determined by the server and is usually dependent on the Effective Request URI.
The action performed by the POST method might not result in a resource that can be identified by a URI. In this case, either 200 (OK) or 204 (No Content) is the appropriate response status, depending on whether or not the response includes an entity that describes the result.
If a resource has been created on the origin server, the response SHOULD be 201 (Created) and contain an entity which describes the status of the request and refers to the new resource, and a Location header (see Section 9.4).
Responses to this method are not cacheable, unless the response includes appropriate Cache-Control or Expires header fields. However, the 303 (See Other) response can be used to direct the user agent to retrieve a cacheable resource.
The PUT method requests that the enclosed entity be stored at the Effective Request URI. If the Effective Request URI refers to an already existing resource, the enclosed entity SHOULD be considered as a modified version of the one residing on the origin server. Otherwise, if the Effective Request URI does not point to an existing resource, and that URI is capable of being defined as a new resource by the requesting user agent, the origin server can create the resource with that URI.
If a new resource is created at the Effective Request URI, the origin server MUST inform the user agent via the 201 (Created) response. If an existing resource is modified, either the 200 (OK) or 204 (No Content) response codes SHOULD be sent to indicate successful completion of the request.
If the resource could not be created or modified with the Effective Request URI, an appropriate error response SHOULD be given that reflects the nature of the problem. The recipient of the entity MUST NOT ignore any Content-* headers (headers starting with the prefix "Content-") that it does not understand or implement and MUST return a 501 (Not Implemented) response in such cases.
If the request passes through a cache and the Effective Request URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable.
The fundamental difference between the POST and PUT requests is reflected in the different meaning of the Effective Request URI. The URI in a POST request identifies the resource that will handle the enclosed entity. That resource might be a data-accepting process, a gateway to some other protocol, or a separate entity that accepts annotations. In contrast, the URI in a PUT request identifies the entity enclosed with the request -- the user agent knows what URI is intended and the server MUST NOT attempt to apply the request to some other resource. If the server desires that the request be applied to a different URI, it MUST send a 301 (Moved Permanently) response; the user agent MAY then make its own decision regarding whether or not to redirect the request.
A single resource MAY be identified by many different URIs. For example, an article might have a URI for identifying "the current version" which is separate from the URI identifying each particular version. In this case, a PUT request on a general URI might result in several other URIs being defined by the origin server.
HTTP/1.1 does not define how a PUT method affects the state of an origin server.
Unless otherwise specified for a particular entity-header, the entity-headers in the PUT request SHOULD be applied to the resource created or modified by the PUT.
The DELETE method requests that the origin server delete the resource identified by the Effective Request URI. This method MAY be overridden by human intervention (or other means) on the origin server. The client cannot be guaranteed that the operation has been carried out, even if the status code returned from the origin server indicates that the action has been completed successfully. However, the server SHOULD NOT indicate success unless, at the time the response is given, it intends to delete the resource or move it to an inaccessible location.
A successful response SHOULD be 200 (OK) if the response includes an entity describing the status, 202 (Accepted) if the action has not yet been enacted, or 204 (No Content) if the action has been enacted but the response does not include an entity.
If the request passes through a cache and the Effective Request URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable.
The TRACE method is used to invoke a remote, application-layer loop-back of the request message. The final recipient of the request SHOULD reflect the message received back to the client as the entity-body of a 200 (OK) response. The final recipient is either the origin server or the first proxy or gateway to receive a Max-Forwards value of zero (0) in the request (see Section 9.5). A TRACE request MUST NOT include an entity.
TRACE allows the client to see what is being received at the other end of the request chain and use that data for testing or diagnostic information. The value of the Via header field (Section 9.9 of [Part1]) is of particular interest, since it acts as a trace of the request chain. Use of the Max-Forwards header field allows the client to limit the length of the request chain, which is useful for testing a chain of proxies forwarding messages in an infinite loop.
If the request is valid, the response SHOULD contain the entire request message in the entity-body, with a Content-Type of "message/http" (see Section 10.3.1 of [Part1]). Responses to this method MUST NOT be cached.
This specification reserves the method name CONNECT for use with a proxy that can dynamically switch to being a tunnel (e.g., SSL tunneling [RFC2817]).
Each Status-Code is described below, including any metainformation required in the response.
This class of status code indicates a provisional response, consisting only of the Status-Line and optional headers, and is terminated by an empty line. There are no required headers for this class of status code. Since HTTP/1.0 did not define any 1xx status codes, servers MUST NOT send a 1xx response to an HTTP/1.0 client except under experimental conditions.
A client MUST be prepared to accept one or more 1xx status responses prior to a regular response, even if the client does not expect a 100 (Continue) status message. Unexpected 1xx status responses MAY be ignored by a user agent.
Proxies MUST forward 1xx responses, unless the connection between the proxy and its client has been closed, or unless the proxy itself requested the generation of the 1xx response. (For example, if a proxy adds a "Expect: 100-continue" field when it forwards a request, then it need not forward the corresponding 100 (Continue) response(s).)
The client SHOULD continue with its request. This interim response is used to inform the client that the initial part of the request has been received and has not yet been rejected by the server. The client SHOULD continue by sending the remainder of the request or, if the request has already been completed, ignore this response. The server MUST send a final response after the request has been completed. See Section 7.2.3 of [Part1] for detailed discussion of the use and handling of this status code.
The server understands and is willing to comply with the client's request, via the Upgrade message header field (Section 9.8 of [Part1]), for a change in the application protocol being used on this connection. The server will switch protocols to those defined by the response's Upgrade header field immediately after the empty line which terminates the 101 response.
The protocol SHOULD be switched only when it is advantageous to do so. For example, switching to a newer version of HTTP is advantageous over older versions, and switching to a real-time, synchronous protocol might be advantageous when delivering resources that use such features.
This class of status code indicates that the client's request was successfully received, understood, and accepted.
The request has succeeded. The information returned with the response is dependent on the method used in the request, for example:
The request has been fulfilled and has resulted in a new resource being created. The newly created resource can be referenced by the URI(s) returned in the entity of the response, with the most specific URI for the resource given by a Location header field. The response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. The origin server MUST create the resource before returning the 201 status code. If the action cannot be carried out immediately, the server SHOULD respond with 202 (Accepted) response instead.
A 201 response MAY contain an ETag response header field indicating the current value of the entity tag for the requested variant just created, see Section 6.1 of [Part4].
The request has been accepted for processing, but the processing has not been completed. The request might or might not eventually be acted upon, as it might be disallowed when processing actually takes place. There is no facility for re-sending a status code from an asynchronous operation such as this.
The 202 response is intentionally non-committal. Its purpose is to allow a server to accept a request for some other process (perhaps a batch-oriented process that is only run once per day) without requiring that the user agent's connection to the server persist until the process is completed. The entity returned with this response SHOULD include an indication of the request's current status and either a pointer to a status monitor or some estimate of when the user can expect the request to be fulfilled.
The returned metainformation in the entity-header is not the definitive set as available from the origin server, but is gathered from a local or a third-party copy. The set presented MAY be a subset or superset of the original version. For example, including local annotation information about the resource might result in a superset of the metainformation known by the origin server. Use of this response code is not required and is only appropriate when the response would otherwise be 200 (OK).
The server has fulfilled the request but does not need to return an entity-body, and might want to return updated metainformation. The response MAY include new or updated metainformation in the form of entity-headers, which if present SHOULD be associated with the requested variant.
If the client is a user agent, it SHOULD NOT change its document view from that which caused the request to be sent. This response is primarily intended to allow input for actions to take place without causing a change to the user agent's active document view, although any new or updated metainformation SHOULD be applied to the document currently in the user agent's active view.
The 204 response MUST NOT include a message-body, and thus is always terminated by the first empty line after the header fields.
The server has fulfilled the request and the user agent SHOULD reset the document view which caused the request to be sent. This response is primarily intended to allow input for actions to take place via user input, followed by a clearing of the form in which the input is given so that the user can easily initiate another input action. The response MUST NOT include an entity.
The server has fulfilled the partial GET request for the resource and the enclosed entity is a partial representation as defined in Section 3.1 of [Part5].
This class of status code indicates that further action needs to be taken by the user agent in order to fulfill the request. The action required MAY be carried out by the user agent without interaction with the user if and only if the method used in the second request is known to be "safe", as defined in Section 7.1.1. A client SHOULD detect infinite redirection loops, since such loops generate network traffic for each redirection.
Note: An earlier version of this specification recommended a maximum of five redirections ([RFC2068], Section 10.3). Content developers should be aware that there might be clients that implement such a fixed limitation.
The requested resource corresponds to any one of a set of representations, each with its own specific location, and agent-driven negotiation information (Section 4 of [Part3]) is being provided so that the user (or user agent) can select a preferred representation and redirect its request to that location.
Unless it was a HEAD request, the response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. Depending upon the format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection.
If the server has a preferred choice of representation, it SHOULD include the specific URI for that representation in the Location field; user agents MAY use the Location field value for automatic redirection. This response is cacheable unless indicated otherwise.
The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Effective Request URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 301 status code is received in response to a request method that is known to be "safe", as defined in Section 7.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving a 301 status code, some existing HTTP/1.0 user agents will erroneously change it into a GET request.
The requested resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client SHOULD continue to use the Effectice Request URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field.
The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 302 status code is received in response to a request method that is known to be "safe", as defined in Section 7.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: HTTP/1.0 ([RFC1945], Section 9.3) and the first version of HTTP/1.1 ([RFC2068], Section 10.3.3) specify that the client is not allowed to change the method on the redirected request. However, most existing user agent implementations treat 302 as if it were a 303 response, performing a GET on the Location field-value regardless of the original request method. Therefore, a previous version of this specification ([RFC2616], Section 10.3.3) has added the status codes 303 and 307 for servers that wish to make unambiguously clear which kind of reaction is expected of the client.
The server directs the user agent to a different resource, indicated by a URI in the Location header field, that provides an indirect response to the original request. The user agent MAY perform a GET request on the URI in the Location field in order to obtain a representation corresponding to the response, be redirected again, or end with an error status. The Location URI is not a substitute reference for the originally requested resource.
The 303 status is generally applicable to any HTTP method. It is primarily used to allow the output of a POST action to redirect the user agent to a selected resource, since doing so provides the information corresponding to the POST response in a form that can be separately identified, bookmarked, and cached independent of the original request.
A 303 response to a GET request indicates that the requested resource does not have a representation of its own that can be transferred by the server over HTTP. The Location URI indicates a resource that is descriptive of the requested resource such that the follow-on representation may be useful without implying that it adequately represents the previously requested resource. Note that answers to the questions of what can be represented, what representations are adequate, and what might be a useful description are outside the scope of HTTP and thus entirely determined by the URI owner(s).
A 303 response SHOULD NOT be cached unless it is indicated as cacheable by Cache-Control or Expires header fields. Except for responses to a HEAD request, the entity of a 303 response SHOULD contain a short hypertext note with a hyperlink to the Location URI.
The response to the request has not been modified since the conditions indicated by the client's conditional GET request, as defined in Section 3.1 of [Part4].
The 305 status was defined in a previous version of this specification (see Appendix A.2), and is now deprecated.
The 306 status code was used in a previous version of the specification, is no longer used, and the code is reserved.
The requested resource resides temporarily under a different URI. Since the redirection MAY be altered on occasion, the client SHOULD continue to use the Effective Request URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field.
The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s) , since many pre-HTTP/1.1 user agents do not understand the 307 status. Therefore, the note SHOULD contain the information necessary for a user to repeat the original request on the new URI.
If the 307 status code is received in response to a request method that is known to be "safe", as defined in Section 7.1.1, then the request MAY be automatically redirected by the user agent without confirmation. Otherwise, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
The 4xx class of status code is intended for cases in which the client seems to have erred. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. These status codes are applicable to any request method. User agents SHOULD display any included entity to the user.
If the client is sending data, a server implementation using TCP SHOULD be careful to ensure that the client acknowledges receipt of the packet(s) containing the response, before the server closes the input connection. If the client continues sending data to the server after the close, the server's TCP stack will send a reset packet to the client, which may erase the client's unacknowledged input buffers before they can be read and interpreted by the HTTP application.
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
The request requires user authentication (see Section 2.1 of [Part7]).
This code is reserved for future use.
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
The server has not found anything matching the Effective Request URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
The method specified in the Request-Line is not allowed for the resource identified by the Effective Request URI. The response MUST include an Allow header containing a list of valid methods for the requested resource.
The resource identified by the request is only capable of generating response entities which have content characteristics not acceptable according to the accept headers sent in the request.
Unless it was a HEAD request, the response SHOULD include an entity containing a list of available entity characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content-Type header field. Depending upon the format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection.
Note: HTTP/1.1 servers are allowed to return responses which are not acceptable according to the accept headers sent in the request. In some cases, this may even be preferable to sending a 406 response. User agents are encouraged to inspect the headers of an incoming response to determine if it is acceptable.
If the response could be unacceptable, a user agent SHOULD temporarily stop receipt of more data and query the user for a decision on further actions.
This code is similar to 401 (Unauthorized), but indicates that the client must first authenticate itself with the proxy (see Section 2.2 of [Part7]).
The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time.
The request could not be completed due to a conflict with the current state of the resource. This code is only allowed in situations where it is expected that the user might be able to resolve the conflict and resubmit the request. The response body SHOULD include enough information for the user to recognize the source of the conflict. Ideally, the response entity would include enough information for the user or user agent to fix the problem; however, that might not be possible and is not required.
Conflicts are most likely to occur in response to a PUT request. For example, if versioning were being used and the entity being PUT included changes to a resource which conflict with those made by an earlier (third-party) request, the server might use the 409 response to indicate that it can't complete the request. In this case, the response entity would likely contain a list of the differences between the two versions in a format defined by the response Content-Type.
The requested resource is no longer available at the server and no forwarding address is known. This condition is expected to be considered permanent. Clients with link editing capabilities SHOULD delete references to the Effective Request URI after user approval. If the server does not know, or has no facility to determine, whether or not the condition is permanent, the status code 404 (Not Found) SHOULD be used instead. This response is cacheable unless indicated otherwise.
The 410 response is primarily intended to assist the task of web maintenance by notifying the recipient that the resource is intentionally unavailable and that the server owners desire that remote links to that resource be removed. Such an event is common for limited-time, promotional services and for resources belonging to individuals no longer working at the server's site. It is not necessary to mark all permanently unavailable resources as "gone" or to keep the mark for any length of time -- that is left to the discretion of the server owner.
The server refuses to accept the request without a defined Content-Length. The client MAY repeat the request if it adds a valid Content-Length header field containing the length of the message-body in the request message.
The precondition given in one or more of the request-header fields evaluated to false when it was tested on the server, as defined in Section 3.2 of [Part4].
The server is refusing to process a request because the request entity is larger than the server is willing or able to process. The server MAY close the connection to prevent the client from continuing the request.
If the condition is temporary, the server SHOULD include a Retry-After header field to indicate that it is temporary and after what time the client MAY try again.
The server is refusing to service the request because the Effective Request URI is longer than the server is willing to interpret. This rare condition is only likely to occur when a client has improperly converted a POST request to a GET request with long query information, when the client has descended into a URI "black hole" of redirection (e.g., a redirected URI prefix that points to a suffix of itself), or when the server is under attack by a client attempting to exploit security holes present in some servers using fixed-length buffers for reading or manipulating the Effective Request URI.
The server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method.
The request included a Range request-header field (Section 5.4 of [Part5]) and none of the range-specifier values in this field overlap the current extent of the selected resource. See Section 3.2 of [Part5]
The expectation given in an Expect request-header field (see Section 9.2) could not be met by this server, or, if the server is a proxy, the server has unambiguous evidence that the request could not be met by the next-hop server.
Response status codes beginning with the digit "5" indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents SHOULD display any included entity to the user. These response codes are applicable to any request method.
The server encountered an unexpected condition which prevented it from fulfilling the request.
The server does not support the functionality required to fulfill the request. This is the appropriate response when the server does not recognize the request method and is not capable of supporting it for any resource.
The server, while acting as a gateway or proxy, received an invalid response from the upstream server it accessed in attempting to fulfill the request.
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
The server, while acting as a gateway or proxy, did not receive a timely response from the upstream server specified by the URI (e.g., HTTP, FTP, LDAP) or some other auxiliary server (e.g., DNS) it needed to access in attempting to complete the request.
Note to implementors: some deployed proxies are known to return 400 or 500 when DNS lookups time out.
The server does not support, or refuses to support, the protocol version that was used in the request message. The server is indicating that it is unable or unwilling to complete the request using the same major version as the client, as described in Section 2.5 of [Part1], other than with this error message. The response SHOULD contain an entity describing why that version is not supported and what other protocols are supported by that server.
This section defines the syntax and semantics of HTTP/1.1 header fields related to request and response semantics.
For entity-header fields, both sender and recipient refer to either the client or the server, depending on who sends and who receives the entity.
The "Allow" response-header field lists the set of methods advertised as supported by the resource identified by the Effective Request URI. The purpose of this field is strictly to inform the recipient of valid methods associated with the resource.
Allow = "Allow" ":" OWS Allow-v Allow-v = #Method
Example of use:
Allow: GET, HEAD, PUT
The actual set of allowed methods is defined by the origin server at the time of each request.
A proxy MUST NOT modify the Allow header field even if it does not understand all the methods specified, since the user agent might have other means of communicating with the origin server.
The "Expect" request-header field is used to indicate that particular server behaviors are required by the client.
Expect = "Expect" ":" OWS Expect-v Expect-v = 1#expectation expectation = "100-continue" / expectation-extension expectation-extension = token [ "=" ( token / quoted-string ) *expect-params ] expect-params = ";" token [ "=" ( token / quoted-string ) ]
A server that does not understand or is unable to comply with any of the expectation values in the Expect field of a request MUST respond with appropriate error status. The server MUST respond with a 417 (Expectation Failed) status if any of the expectations cannot be met or, if there are other problems with the request, some other 4xx status.
This header field is defined with extensible syntax to allow for future extensions. If a server receives a request containing an Expect field that includes an expectation-extension that it does not support, it MUST respond with a 417 (Expectation Failed) status.
Comparison of expectation values is case-insensitive for unquoted tokens (including the 100-continue token), and is case-sensitive for quoted-string expectation-extensions.
The Expect mechanism is hop-by-hop: that is, an HTTP/1.1 proxy MUST return a 417 (Expectation Failed) status if it receives a request with an expectation that it cannot meet. However, the Expect request-header itself is end-to-end; it MUST be forwarded if the request is forwarded.
Many older HTTP/1.0 and HTTP/1.1 applications do not understand the Expect header.
See Section 7.2.3 of [Part1] for the use of the 100 (Continue) status.
The "From" request-header field, if given, SHOULD contain an Internet e-mail address for the human user who controls the requesting user agent. The address SHOULD be machine-usable, as defined by "mailbox" in Section 3.4 of [RFC5322]:
From = "From" ":" OWS From-v From-v = mailbox mailbox = <mailbox, defined in [RFC5322], Section 3.4>
An example is:
This header field MAY be used for logging purposes and as a means for identifying the source of invalid or unwanted requests. It SHOULD NOT be used as an insecure form of access protection. The interpretation of this field is that the request is being performed on behalf of the person given, who accepts responsibility for the method performed. In particular, robot agents SHOULD include this header so that the person responsible for running the robot can be contacted if problems occur on the receiving end.
The Internet e-mail address in this field MAY be separate from the Internet host which issued the request. For example, when a request is passed through a proxy the original issuer's address SHOULD be used.
The client SHOULD NOT send the From header field without the user's approval, as it might conflict with the user's privacy interests or their site's security policy. It is strongly recommended that the user be able to disable, enable, and modify the value of this field at any time prior to a request.
The "Location" response-header field is used to identify a newly created resource, or to redirect the recipient to a different location for completion of the request.
For 201 (Created) responses, the Location is the URI of the new resource which was created by the request. For 3xx responses, the location SHOULD indicate the server's preferred URI for automatic redirection to the resource.
The field value consists of a single URI-reference. When it has the form of a relative reference ([RFC3986], Section 4.2), the final value is computed by resolving it against the effective request URI ([RFC3986], Section 5).
Location = "Location" ":" OWS Location-v Location-v = URI-reference
There are circumstances in which a fragment identifier in a Location URI would not be appropriate:
Note: This specification does not define precedence rules for the case where the original URI, as navigated to by the user agent, and the Location header field value both contain fragment identifiers.
Note: The Content-Location header field (Section 5.7 of [Part3]) differs from Location in that the Content-Location identifies the original location of the entity enclosed in the response. It is therefore possible for a response to contain header fields for both Location and Content-Location.
The "Max-Forwards" request-header field provides a mechanism with the TRACE (Section 7.8) and OPTIONS (Section 7.2) methods to limit the number of times that the request is forwarded by proxies or gateways. This can be useful when the client is attempting to trace a request which appears to be failing or looping in mid-chain.
Max-Forwards = "Max-Forwards" ":" OWS Max-Forwards-v Max-Forwards-v = 1*DIGIT
The Max-Forwards value is a decimal integer indicating the remaining number of times this request message may be forwarded.
Each proxy or gateway recipient of a TRACE or OPTIONS request containing a Max-Forwards header field MUST check and update its value prior to forwarding the request. If the received value is zero (0), the recipient MUST NOT forward the request; instead, it MUST respond as the final recipient. If the received Max-Forwards value is greater than zero, then the forwarded message MUST contain an updated Max-Forwards field with a value decremented by one (1).
The Max-Forwards header field MAY be ignored for all other methods defined by this specification and for any extension methods for which it is not explicitly referred to as part of that method definition.
The "Referer" [sic] request-header field allows the client to specify the URI of the resource from which the Effective Request URI was obtained (the "referrer", although the header field is misspelled.).
The Referer header allows servers to generate lists of back-links to resources for interest, logging, optimized caching, etc. It also allows obsolete or mistyped links to be traced for maintenance. Some servers use Referer as a means of controlling where they allow links from (so-called "deep linking"), but it should be noted that legitimate requests are not required to contain a Referer header field.
If the Effective Request URI was obtained from a source that does not have its own URI (e.g., input from the user keyboard), the Referer field MUST either be sent with the value "about:blank", or not be sent at all. Note that this requirement does not apply to sources with non-HTTP URIs (e.g., FTP).
Referer = "Referer" ":" OWS Referer-v Referer-v = absolute-URI / partial-URI
If the field value is a relative URI, it SHOULD be interpreted relative to the Effective Request URI. The URI MUST NOT include a fragment. See Section 11.2 for security considerations.
The response-header "Retry-After" field can be used with a 503 (Service Unavailable) response to indicate how long the service is expected to be unavailable to the requesting client. This field MAY also be used with any 3xx (Redirection) response to indicate the minimum time the user-agent is asked wait before issuing the redirected request.
The value of this field can be either an HTTP-date or an integer number of seconds (in decimal) after the time of the response.
Retry-After = "Retry-After" ":" OWS Retry-After-v Retry-After-v = HTTP-date / delta-seconds
Time spans are non-negative decimal integers, representing time in seconds.
delta-seconds = 1*DIGIT
Two examples of its use are
Retry-After: Fri, 31 Dec 1999 23:59:59 GMT Retry-After: 120
In the latter example, the delay is 2 minutes.
The "Server" response-header field contains information about the software used by the origin server to handle the request.
The field can contain multiple product tokens (Section 6.3 of [Part1]) and comments (Section 3.2 of [Part1]) identifying the server and any significant subproducts. The product tokens are listed in order of their significance for identifying the application.
Server = "Server" ":" OWS Server-v Server-v = product *( RWS ( product / comment ) )
Server: CERN/3.0 libwww/2.17
If the response is being forwarded through a proxy, the proxy application MUST NOT modify the Server response-header. Instead, it MUST include a Via field (as described in Section 9.9 of [Part1]).
Note: Revealing the specific software version of the server might allow the server machine to become more vulnerable to attacks against software that is known to contain security holes. Server implementors are encouraged to make this field a configurable option.
The "User-Agent" request-header field contains information about the user agent originating the request. This is for statistical purposes, the tracing of protocol violations, and automated recognition of user agents for the sake of tailoring responses to avoid particular user agent limitations.
User agents SHOULD include this field with requests. The field can contain multiple product tokens (Section 6.3 of [Part1]) and comments (Section 3.2 of [Part1]) identifying the agent and any subproducts which form a significant part of the user agent. By convention, the product tokens are listed in order of their significance for identifying the application.
User-Agent = "User-Agent" ":" OWS User-Agent-v User-Agent-v = product *( RWS ( product / comment ) )
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
The registration procedure for HTTP Methods is defined by Section 2.1 of this document.
The HTTP Method Registry should be created at <http://www.iana.org/assignments/http-methods> and be populated with the registrations below:
The registration procedure for HTTP Status Codes -- previously defined in Section 7.1 of [RFC2817] -- is now defined by Section 4.1 of this document.
The HTTP Status Code Registry located at <http://www.iana.org/assignments/http-status-codes> should be updated with the registrations below:
|101||Switching Protocols||Section 8.1.2|
|203||Non-Authoritative Information||Section 8.2.4|
|204||No Content||Section 8.2.5|
|205||Reset Content||Section 8.2.6|
|300||Multiple Choices||Section 8.3.1|
|301||Moved Permanently||Section 8.3.2|
|303||See Other||Section 8.3.4|
|305||Use Proxy||Section 8.3.6|
|307||Temporary Redirect||Section 8.3.8|
|400||Bad Request||Section 8.4.1|
|402||Payment Required||Section 8.4.3|
|404||Not Found||Section 8.4.5|
|405||Method Not Allowed||Section 8.4.6|
|406||Not Acceptable||Section 8.4.7|
|407||Proxy Authentication Required||Section 8.4.8|
|408||Request Timeout||Section 8.4.9|
|411||Length Required||Section 8.4.12|
|413||Request Entity Too Large||Section 8.4.14|
|414||URI Too Long||Section 8.4.15|
|415||Unsupported Media Type||Section 8.4.16|
|417||Expectation Failed||Section 8.4.18|
|500||Internal Server Error||Section 8.5.1|
|501||Not Implemented||Section 8.5.2|
|502||Bad Gateway||Section 8.5.3|
|503||Service Unavailable||Section 8.5.4|
|504||Gateway Timeout||Section 8.5.5|
|505||HTTP Version Not Supported||Section 8.5.6|
The Message Header Registry located at <http://www.iana.org/assignments/message-headers/message-header-index.html> should be updated with the permanent registrations below (see [RFC3864]):
|Header Field Name||Protocol||Status||Reference|
The change controller is: "IETF (firstname.lastname@example.org) - Internet Engineering Task Force".
This section is meant to inform application developers, information providers, and users of the security limitations in HTTP/1.1 as described by this document. The discussion does not include definitive solutions to the problems revealed, though it does make some suggestions for reducing security risks.
Like any generic data transfer protocol, HTTP cannot regulate the content of the data that is transferred, nor is there any a priori method of determining the sensitivity of any particular piece of information within the context of any given request. Therefore, applications SHOULD supply as much control over this information as possible to the provider of that information. Four header fields are worth special mention in this context: Server, Via, Referer and From.
Revealing the specific software version of the server might allow the server machine to become more vulnerable to attacks against software that is known to contain security holes. Implementors SHOULD make the Server header field a configurable option.
Proxies which serve as a portal through a network firewall SHOULD take special precautions regarding the transfer of header information that identifies the hosts behind the firewall. In particular, they SHOULD remove, or replace with sanitized versions, any Via fields generated behind the firewall.
The Referer header allows reading patterns to be studied and reverse links drawn. Although it can be very useful, its power can be abused if user details are not separated from the information contained in the Referer. Even when the personal information has been removed, the Referer header might indicate a private document's URI whose publication would be inappropriate.
The information sent in the From field might conflict with the user's privacy interests or their site's security policy, and hence it SHOULD NOT be transmitted without the user being able to disable, enable, and modify the contents of the field. The user MUST be able to set the contents of this field within a user preference or application defaults configuration.
We suggest, though do not require, that a convenient toggle interface be provided for the user to enable or disable the sending of From and Referer information.
The User-Agent (Section 9.9) or Server (Section 9.8) header fields can sometimes be used to determine that a specific client or server have a particular security hole which might be exploited. Unfortunately, this same information is often used for other valuable purposes for which HTTP currently has no better mechanism.
Some methods, like TRACE (Section 7.8) may expose information sent in request headers in the response entity. Clients SHOULD be careful with sensitive information, like Cookies, Authorization credentials and other headers that might be used to collect data from the client.
Because the source of a link might be private information or might reveal an otherwise private information source, it is strongly recommended that the user be able to select whether or not the Referer field is sent. For example, a browser client could have a toggle switch for browsing openly/anonymously, which would respectively enable/disable the sending of Referer and From information.
Clients SHOULD NOT include a Referer header field in a (non-secure) HTTP request if the referring page was transferred with a secure protocol.
Authors of services should not use GET-based forms for the submission of sensitive data because that data will be encoded in the request-target. Many existing servers, proxies, and user agents log or display the request-target in places where it might be visible to third parties. Such services can use POST-based form submission instead.
If a single server supports multiple organizations that do not trust one another, then it MUST check the values of Location and Content-Location headers in responses that are generated under control of said organizations to make sure that they do not attempt to invalidate resources over which they have no authority.
|[Part1]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., “HTTP/1.1, part 1: URIs, Connections, and Message Parsing”, Internet-Draft draft-ietf-httpbis-p1-messaging-latest (work in progress), July 2010.|
|[Part3]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., “HTTP/1.1, part 3: Message Payload and Content Negotiation”, Internet-Draft draft-ietf-httpbis-p3-payload-latest (work in progress), July 2010.|
|[Part4]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., “HTTP/1.1, part 4: Conditional Requests”, Internet-Draft draft-ietf-httpbis-p4-conditional-latest (work in progress), July 2010.|
|[Part5]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., “HTTP/1.1, part 5: Range Requests and Partial Responses”, Internet-Draft draft-ietf-httpbis-p5-range-latest (work in progress), July 2010.|
|[Part6]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., Nottingham, M., Ed., and J. Reschke, Ed., “HTTP/1.1, part 6: Caching”, Internet-Draft draft-ietf-httpbis-p6-cache-latest (work in progress), July 2010.|
|[Part7]||Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., “HTTP/1.1, part 7: Authentication”, Internet-Draft draft-ietf-httpbis-p7-auth-latest (work in progress), July 2010.|
|[RFC2119]||Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC 2119, March 1997.|
|[RFC3986]||Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax”, RFC 3986, STD 66, January 2005.|
|[RFC5234]||Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF”, STD 68, RFC 5234, January 2008.|
|[RFC1945]||Berners-Lee, T., Fielding, R., and H. Nielsen, “Hypertext Transfer Protocol -- HTTP/1.0”, RFC 1945, May 1996.|
|[RFC2068]||Fielding, R., Gettys, J., Mogul, J., Nielsen, H., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2068, January 1997.|
|[RFC2616]||Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2616, June 1999.|
|[RFC2817]||Khare, R. and S. Lawrence, “Upgrading to TLS Within HTTP/1.1”, RFC 2817, May 2000.|
|[RFC3864]||Klyne, G., Nottingham, M., and J. Mogul, “Registration Procedures for Message Header Fields”, BCP 90, RFC 3864, September 2004.|
|[RFC5226]||Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs”, BCP 26, RFC 5226, May 2008.|
|[RFC5322]||Resnick, P., “Internet Message Format”, RFC 5322, October 2008.|
Clarified which error code should be used for inbound server failures (e.g., DNS failures). (Section 8.5.5).
201 (Created) had a race that required an Etag be sent when a resource is first created. (Section 8.2.2).
303 (See Also) and 307 (Temporary Redirect) added to address user agent failure to implement status code 302 properly. (Section 8.3.4 and 8.3.8)
Rewrite of message transmission requirements to make it much harder for implementors to get it wrong, as the consequences of errors here can have significant impact on the Internet, and to deal with the following problems:
This change adds the Expect header and 417 status code.
Clean up confusion between 403 and 404 responses. (Section 8.4.4, 8.4.5, and 8.4.11)
The PATCH, LINK, UNLINK methods were defined but not commonly implemented in previous versions of this specification. See Section 19.6.1 of [RFC2068].
This document takes over the Status Code Registry, previously defined in Section 7.1 of [RFC2817]. (Section 4.1)
Clarify definition of POST. (Section 7.5)
Failed to consider that there are many other request methods that are safe to automatically redirect, and further that the user agent is able to make that determination based on the request method semantics. (Sections 8.3.2, 8.3.3 and 8.3.8)
Deprecate 305 Use Proxy status code, because user agents did not implement it. It used to indicate that the requested resource must be accessed through the proxy given by the Location field. The Location field gave the URI of the proxy. The recipient was expected to repeat this single request via the proxy. (Section 8.3.6)
Reclassify Allow header as response header, removing the option to specify it in a PUT request. Relax the server requirement on the contents of the Allow header and remove requirement on clients to always trust the header value. (Section 9.1)
Correct syntax of Location header to allow URI references (including relative references and fragments), as referred symbol "absoluteURI" wasn't what was expected, and add some clarifications as to when use of fragments would not be appropriate. (Section 9.4)
Allow Referer value of "about:blank" as alternative to not specifying it. (Section 9.6)
In the description of the Server header, the Via field was described as a SHOULD. The requirement was and is stated correctly in the description of the Via header in Section 9.9 of [Part1]. (Section 9.8)
Accept = <Accept, defined in [Part3], Section 5.1> Accept-Charset = <Accept-Charset, defined in [Part3], Section 5.2> Accept-Encoding = <Accept-Encoding, defined in [Part3], Section 5.3> Accept-Language = <Accept-Language, defined in [Part3], Section 5.4> Accept-Ranges = <Accept-Ranges, defined in [Part5], Section 5.1> Age = <Age, defined in [Part6], Section 3.1> Allow = "Allow:" OWS Allow-v Allow-v = [ ( "," / Method ) *( OWS "," [ OWS Method ] ) ] Authorization = <Authorization, defined in [Part7], Section 3.1> ETag = <ETag, defined in [Part4], Section 6.1> Expect = "Expect:" OWS Expect-v Expect-v = *( "," OWS ) expectation *( OWS "," [ OWS expectation ] ) From = "From:" OWS From-v From-v = mailbox HTTP-date = <HTTP-date, defined in [Part1], Section 6.1> Host = <Host, defined in [Part1], Section 2.6> If-Match = <If-Match, defined in [Part4], Section 6.2> If-Modified-Since = <If-Modified-Since, defined in [Part4], Section 6.3> If-None-Match = <If-None-Match, defined in [Part4], Section 6.4> If-Range = <If-Range, defined in [Part5], Section 5.3> If-Unmodified-Since = <If-Unmodified-Since, defined in [Part4], Section 6.5> Location = "Location:" OWS Location-v Location-v = URI-reference Max-Forwards = "Max-Forwards:" OWS Max-Forwards-v Max-Forwards-v = 1*DIGIT Method = %x4F.184.108.40.206F.4E.53 ; OPTIONS / %x47.45.54 ; GET / %x220.127.116.11 ; HEAD / %x50.4F.53.54 ; POST / %x50.55.54 ; PUT / %x44.45.4C.45.54.45 ; DELETE / %x18.104.22.168.45 ; TRACE / %x43.4F.4E.4E.45.43.54 ; CONNECT / extension-method OWS = <OWS, defined in [Part1], Section 1.2.2> Proxy-Authenticate = <Proxy-Authenticate, defined in [Part7], Section 3.2> Proxy-Authorization = <Proxy-Authorization, defined in [Part7], Section 3.3> RWS = <RWS, defined in [Part1], Section 1.2.2> Range = <Range, defined in [Part5], Section 5.4> Reason-Phrase = *( WSP / VCHAR / obs-text ) Referer = "Referer:" OWS Referer-v Referer-v = absolute-URI / partial-URI Retry-After = "Retry-After:" OWS Retry-After-v Retry-After-v = HTTP-date / delta-seconds Server = "Server:" OWS Server-v Server-v = product *( RWS ( product / comment ) ) Status-Code = "100" / "101" / "200" / "201" / "202" / "203" / "204" / "205" / "206" / "300" / "301" / "302" / "303" / "304" / "305" / "307" / "400" / "401" / "402" / "403" / "404" / "405" / "406" / "407" / "408" / "409" / "410" / "411" / "412" / "413" / "414" / "415" / "416" / "417" / "500" / "501" / "502" / "503" / "504" / "505" / extension-code TE = <TE, defined in [Part1], Section 9.5> URI-reference = <URI-reference, defined in [Part1], Section 2.6> User-Agent = "User-Agent:" OWS User-Agent-v User-Agent-v = product *( RWS ( product / comment ) ) Vary = <Vary, defined in [Part6], Section 3.5> WWW-Authenticate = <WWW-Authenticate, defined in [Part7], Section 3.4> absolute-URI = <absolute-URI, defined in [Part1], Section 2.6> comment = <comment, defined in [Part1], Section 3.2> delta-seconds = 1*DIGIT expect-params = ";" token [ "=" ( token / quoted-string ) ] expectation = "100-continue" / expectation-extension expectation-extension = token [ "=" ( token / quoted-string ) *expect-params ] extension-code = 3DIGIT extension-method = token mailbox = <mailbox, defined in [RFC5322], Section 3.4> obs-text = <obs-text, defined in [Part1], Section 1.2.2> partial-URI = <partial-URI, defined in [Part1], Section 2.6> product = <product, defined in [Part1], Section 6.3> quoted-string = <quoted-string, defined in [Part1], Section 1.2.2> request-header = Accept / Accept-Charset / Accept-Encoding / Accept-Language / Authorization / Expect / From / Host / If-Match / If-Modified-Since / If-None-Match / If-Range / If-Unmodified-Since / Max-Forwards / Proxy-Authorization / Range / Referer / TE / User-Agent response-header = Accept-Ranges / Age / Allow / ETag / Location / Proxy-Authenticate / Retry-After / Server / Vary / WWW-Authenticate token = <token, defined in [Part1], Section 1.2.2>
; Reason-Phrase defined but not used ; Status-Code defined but not used ; request-header defined but not used ; response-header defined but not used
Extracted relevant partitions from [RFC2616].
Ongoing work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):
Ongoing work on IANA Message Header Registration (<http://tools.ietf.org/wg/httpbis/trac/ticket/40>):
Ongoing work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):
Ongoing work on Method Registry (<http://tools.ietf.org/wg/httpbis/trac/ticket/72>):
Ongoing work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):
Final work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):
Partly resolved issues:
Partly resolved issues: