source: draft-ietf-httpbis/latest/p1-messaging.xml @ 670

Last change on this file since 670 was 670, checked in by julian.reschke@…, 11 years ago

Rephrase registration procedures for Transfer/Content? Codings in terms of RFC5226, requiring Expert Review & Specification (see #188)

  • Property svn:eol-style set to native
File size: 216.8 KB
Line 
1<?xml version="1.0" encoding="utf-8"?>
2<?xml-stylesheet type='text/xsl' href='../myxml2rfc.xslt'?>
3<!DOCTYPE rfc [
4  <!ENTITY MAY "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>MAY</bcp14>">
5  <!ENTITY MUST "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>MUST</bcp14>">
6  <!ENTITY MUST-NOT "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>MUST NOT</bcp14>">
7  <!ENTITY OPTIONAL "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>OPTIONAL</bcp14>">
8  <!ENTITY RECOMMENDED "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>RECOMMENDED</bcp14>">
9  <!ENTITY REQUIRED "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>REQUIRED</bcp14>">
10  <!ENTITY SHALL "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>SHALL</bcp14>">
11  <!ENTITY SHALL-NOT "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>SHALL NOT</bcp14>">
12  <!ENTITY SHOULD "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>SHOULD</bcp14>">
13  <!ENTITY SHOULD-NOT "<bcp14 xmlns='http://purl.org/net/xml2rfc/ext'>SHOULD NOT</bcp14>">
14  <!ENTITY ID-VERSION "latest">
15  <!ENTITY ID-MONTH "August">
16  <!ENTITY ID-YEAR "2009">
17  <!ENTITY caching-overview       "<xref target='Part6' x:rel='#caching.overview' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
18  <!ENTITY payload                "<xref target='Part3' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
19  <!ENTITY media-types            "<xref target='Part3' x:rel='#media.types' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
20  <!ENTITY content-codings        "<xref target='Part3' x:rel='#content.codings' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
21  <!ENTITY CONNECT                "<xref target='Part2' x:rel='#CONNECT' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
22  <!ENTITY content.negotiation    "<xref target='Part3' x:rel='#content.negotiation' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
23  <!ENTITY diff2045entity         "<xref target='Part3' x:rel='#differences.between.http.entities.and.rfc.2045.entities' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
24  <!ENTITY entity                 "<xref target='Part3' x:rel='#entity' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
25  <!ENTITY entity-body            "<xref target='Part3' x:rel='#entity.body' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
26  <!ENTITY entity-header-fields   "<xref target='Part3' x:rel='#entity.header.fields' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
27  <!ENTITY header-cache-control   "<xref target='Part6' x:rel='#header.cache-control' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
28  <!ENTITY header-expect          "<xref target='Part2' x:rel='#header.expect' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
29  <!ENTITY header-pragma          "<xref target='Part6' x:rel='#header.pragma' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
30  <!ENTITY header-warning         "<xref target='Part6' x:rel='#header.warning' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
31  <!ENTITY idempotent-methods     "<xref target='Part2' x:rel='#idempotent.methods' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
32  <!ENTITY request-header-fields  "<xref target='Part2' x:rel='#request.header.fields' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
33  <!ENTITY response-header-fields "<xref target='Part2' x:rel='#response.header.fields' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
34  <!ENTITY status-codes           "<xref target='Part2' x:rel='#status.codes' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
35  <!ENTITY status-100             "<xref target='Part2' x:rel='#status.100' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
36  <!ENTITY status-1xx             "<xref target='Part2' x:rel='#status.1xx' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
37  <!ENTITY status-414             "<xref target='Part2' x:rel='#status.414' xmlns:x='http://purl.org/net/xml2rfc/ext'/>">
38]>
39<?rfc toc="yes" ?>
40<?rfc symrefs="yes" ?>
41<?rfc sortrefs="yes" ?>
42<?rfc compact="yes"?>
43<?rfc subcompact="no" ?>
44<?rfc linkmailto="no" ?>
45<?rfc editing="no" ?>
46<?rfc comments="yes"?>
47<?rfc inline="yes"?>
48<?rfc-ext allow-markup-in-artwork="yes" ?>
49<?rfc-ext include-references-in-index="yes" ?>
50<rfc obsoletes="2616" category="std" x:maturity-level="draft"
51     ipr="pre5378Trust200902" docName="draft-ietf-httpbis-p1-messaging-&ID-VERSION;"
52     xmlns:x='http://purl.org/net/xml2rfc/ext'>
53<front>
54
55  <title abbrev="HTTP/1.1, Part 1">HTTP/1.1, part 1: URIs, Connections, and Message Parsing</title>
56
57  <author initials="R." surname="Fielding" fullname="Roy T. Fielding" role="editor">
58    <organization abbrev="Day Software">Day Software</organization>
59    <address>
60      <postal>
61        <street>23 Corporate Plaza DR, Suite 280</street>
62        <city>Newport Beach</city>
63        <region>CA</region>
64        <code>92660</code>
65        <country>USA</country>
66      </postal>
67      <phone>+1-949-706-5300</phone>
68      <facsimile>+1-949-706-5305</facsimile>
69      <email>fielding@gbiv.com</email>
70      <uri>http://roy.gbiv.com/</uri>
71    </address>
72  </author>
73
74  <author initials="J." surname="Gettys" fullname="Jim Gettys">
75    <organization>One Laptop per Child</organization>
76    <address>
77      <postal>
78        <street>21 Oak Knoll Road</street>
79        <city>Carlisle</city>
80        <region>MA</region>
81        <code>01741</code>
82        <country>USA</country>
83      </postal>
84      <email>jg@laptop.org</email>
85      <uri>http://www.laptop.org/</uri>
86    </address>
87  </author>
88 
89  <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
90    <organization abbrev="HP">Hewlett-Packard Company</organization>
91    <address>
92      <postal>
93        <street>HP Labs, Large Scale Systems Group</street>
94        <street>1501 Page Mill Road, MS 1177</street>
95        <city>Palo Alto</city>
96        <region>CA</region>
97        <code>94304</code>
98        <country>USA</country>
99      </postal>
100      <email>JeffMogul@acm.org</email>
101    </address>
102  </author>
103
104  <author initials="H." surname="Frystyk" fullname="Henrik Frystyk Nielsen">
105    <organization abbrev="Microsoft">Microsoft Corporation</organization>
106    <address>
107      <postal>
108        <street>1 Microsoft Way</street>
109        <city>Redmond</city>
110        <region>WA</region>
111        <code>98052</code>
112        <country>USA</country>
113      </postal>
114      <email>henrikn@microsoft.com</email>
115    </address>
116  </author>
117
118  <author initials="L." surname="Masinter" fullname="Larry Masinter">
119    <organization abbrev="Adobe Systems">Adobe Systems, Incorporated</organization>
120    <address>
121      <postal>
122        <street>345 Park Ave</street>
123        <city>San Jose</city>
124        <region>CA</region>
125        <code>95110</code>
126        <country>USA</country>
127      </postal>
128      <email>LMM@acm.org</email>
129      <uri>http://larry.masinter.net/</uri>
130    </address>
131  </author>
132 
133  <author initials="P." surname="Leach" fullname="Paul J. Leach">
134    <organization abbrev="Microsoft">Microsoft Corporation</organization>
135    <address>
136      <postal>
137        <street>1 Microsoft Way</street>
138        <city>Redmond</city>
139        <region>WA</region>
140        <code>98052</code>
141      </postal>
142      <email>paulle@microsoft.com</email>
143    </address>
144  </author>
145   
146  <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
147    <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
148    <address>
149      <postal>
150        <street>MIT Computer Science and Artificial Intelligence Laboratory</street>
151        <street>The Stata Center, Building 32</street>
152        <street>32 Vassar Street</street>
153        <city>Cambridge</city>
154        <region>MA</region>
155        <code>02139</code>
156        <country>USA</country>
157      </postal>
158      <email>timbl@w3.org</email>
159      <uri>http://www.w3.org/People/Berners-Lee/</uri>
160    </address>
161  </author>
162
163  <author initials="Y." surname="Lafon" fullname="Yves Lafon" role="editor">
164    <organization abbrev="W3C">World Wide Web Consortium</organization>
165    <address>
166      <postal>
167        <street>W3C / ERCIM</street>
168        <street>2004, rte des Lucioles</street>
169        <city>Sophia-Antipolis</city>
170        <region>AM</region>
171        <code>06902</code>
172        <country>France</country>
173      </postal>
174      <email>ylafon@w3.org</email>
175      <uri>http://www.raubacapeu.net/people/yves/</uri>
176    </address>
177  </author>
178
179  <author initials="J. F." surname="Reschke" fullname="Julian F. Reschke" role="editor">
180    <organization abbrev="greenbytes">greenbytes GmbH</organization>
181    <address>
182      <postal>
183        <street>Hafenweg 16</street>
184        <city>Muenster</city><region>NW</region><code>48155</code>
185        <country>Germany</country>
186      </postal>
187      <phone>+49 251 2807760</phone>
188      <facsimile>+49 251 2807761</facsimile>
189      <email>julian.reschke@greenbytes.de</email>
190      <uri>http://greenbytes.de/tech/webdav/</uri>
191    </address>
192  </author>
193
194  <date month="&ID-MONTH;" year="&ID-YEAR;"/>
195  <workgroup>HTTPbis Working Group</workgroup>
196
197<abstract>
198<t>
199   The Hypertext Transfer Protocol (HTTP) is an application-level
200   protocol for distributed, collaborative, hypertext information
201   systems. HTTP has been in use by the World Wide Web global information
202   initiative since 1990. This document is Part 1 of the seven-part specification
203   that defines the protocol referred to as "HTTP/1.1" and, taken together,
204   obsoletes RFC 2616.  Part 1 provides an overview of HTTP and
205   its associated terminology, defines the "http" and "https" Uniform
206   Resource Identifier (URI) schemes, defines the generic message syntax
207   and parsing requirements for HTTP message frames, and describes
208   general security concerns for implementations.
209</t>
210</abstract>
211
212<note title="Editorial Note (To be removed by RFC Editor)">
213  <t>
214    Discussion of this draft should take place on the HTTPBIS working group
215    mailing list (ietf-http-wg@w3.org). The current issues list is
216    at <eref target="http://tools.ietf.org/wg/httpbis/trac/report/11"/>
217    and related documents (including fancy diffs) can be found at
218    <eref target="http://tools.ietf.org/wg/httpbis/"/>.
219  </t>
220  <t>
221    The changes in this draft are summarized in <xref target="changes.since.07"/>.
222  </t>
223</note>
224</front>
225<middle>
226<section title="Introduction" anchor="introduction">
227<t>
228   The Hypertext Transfer Protocol (HTTP) is an application-level
229   request/response protocol that uses extensible semantics and MIME-like
230   message payloads for flexible interaction with network-based hypertext
231   information systems. HTTP relies upon the Uniform Resource Identifier (URI)
232   standard <xref target="RFC3986"/> to indicate request targets and
233   relationships between resources.
234   Messages are passed in a format similar to that used by Internet mail
235   <xref target="RFC5322"/> and the Multipurpose Internet Mail Extensions
236   (MIME) <xref target="RFC2045"/> (see &diff2045entity; for the differences
237   between HTTP and MIME messages).
238</t>
239<t>
240   HTTP is a generic interface protocol for information systems. It is
241   designed to hide the details of how a service is implemented by presenting
242   a uniform interface to clients that is independent of the types of
243   resources provided. Likewise, servers do not need to be aware of each
244   client's purpose: an HTTP request can be considered in isolation rather
245   than being associated with a specific type of client or a predetermined
246   sequence of application steps. The result is a protocol that can be used
247   effectively in many different contexts and for which implementations can
248   evolve independently over time.
249</t>
250<t>
251   HTTP is also designed for use as a generic protocol for translating
252   communication to and from other Internet information systems.
253   HTTP proxies and gateways provide access to alternative information
254   services by translating their diverse protocols into a hypertext
255   format that can be viewed and manipulated by clients in the same way
256   as HTTP services.
257</t>
258<t>
259   One consequence of HTTP flexibility is that the protocol cannot be
260   defined in terms of what occurs behind the interface. Instead, we
261   are limited to defining the syntax of communication, the intent
262   of received communication, and the expected behavior of recipients.
263   If the communication is considered in isolation, then successful
264   actions should be reflected in corresponding changes to the
265   observable interface provided by servers. However, since multiple
266   clients may act in parallel and perhaps at cross-purposes, we
267   cannot require that such changes be observable beyond the scope
268   of a single response.
269</t>
270<t>
271   This document is Part 1 of the seven-part specification of HTTP,
272   defining the protocol referred to as "HTTP/1.1" and obsoleting
273   <xref target="RFC2616"/>.
274   Part 1 describes the architectural elements that are used or
275   referred to in HTTP, defines the "http" and "https" URI schemes,
276   describes overall network operation and connection management,
277   and defines HTTP message framing and forwarding requirements.
278   Our goal is to define all of the mechanisms necessary for HTTP message
279   handling that are independent of message semantics, thereby defining the
280   complete set of requirements for message parsers and
281   message-forwarding intermediaries.
282</t>
283
284<section title="Requirements" anchor="intro.requirements">
285<t>
286   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
287   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
288   document are to be interpreted as described in <xref target="RFC2119"/>.
289</t>
290<t>
291   An implementation is not compliant if it fails to satisfy one or more
292   of the &MUST; or &REQUIRED; level requirements for the protocols it
293   implements. An implementation that satisfies all the &MUST; or &REQUIRED;
294   level and all the &SHOULD; level requirements for its protocols is said
295   to be "unconditionally compliant"; one that satisfies all the &MUST;
296   level requirements but not all the &SHOULD; level requirements for its
297   protocols is said to be "conditionally compliant."
298</t>
299</section>
300
301<section title="Syntax Notation" anchor="notation">
302<iref primary="true" item="Grammar" subitem="ALPHA"/>
303<iref primary="true" item="Grammar" subitem="CR"/>
304<iref primary="true" item="Grammar" subitem="CRLF"/>
305<iref primary="true" item="Grammar" subitem="CTL"/>
306<iref primary="true" item="Grammar" subitem="DIGIT"/>
307<iref primary="true" item="Grammar" subitem="DQUOTE"/>
308<iref primary="true" item="Grammar" subitem="HEXDIG"/>
309<iref primary="true" item="Grammar" subitem="LF"/>
310<iref primary="true" item="Grammar" subitem="OCTET"/>
311<iref primary="true" item="Grammar" subitem="SP"/>
312<iref primary="true" item="Grammar" subitem="VCHAR"/>
313<iref primary="true" item="Grammar" subitem="WSP"/>
314<t>
315   This specification uses the Augmented Backus-Naur Form (ABNF) notation
316   of <xref target="RFC5234"/>.
317</t>
318<t anchor="core.rules">
319  <x:anchor-alias value="ALPHA"/>
320  <x:anchor-alias value="CTL"/>
321  <x:anchor-alias value="CR"/>
322  <x:anchor-alias value="CRLF"/>
323  <x:anchor-alias value="DIGIT"/>
324  <x:anchor-alias value="DQUOTE"/>
325  <x:anchor-alias value="HEXDIG"/>
326  <x:anchor-alias value="LF"/>
327  <x:anchor-alias value="OCTET"/>
328  <x:anchor-alias value="SP"/>
329  <x:anchor-alias value="VCHAR"/>
330  <x:anchor-alias value="WSP"/>
331   The following core rules are included by
332   reference, as defined in <xref target="RFC5234" x:fmt="," x:sec="B.1"/>:
333   ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls),
334   DIGIT (decimal 0-9), DQUOTE (double quote),
335   HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed),
336   OCTET (any 8-bit sequence of data), SP (space),
337   VCHAR (any visible <xref target="USASCII"/> character),
338   and WSP (whitespace).
339</t>
340
341<section title="ABNF Extension: #rule" anchor="notation.abnf">
342  <t>
343    One extension to the ABNF rules of <xref target="RFC5234"/> is used to
344    improve readability.
345  </t>
346  <t>
347    A construct "#" is defined, similar to "*", for defining lists of
348    elements. The full form is "&lt;n&gt;#&lt;m&gt;element" indicating at least
349    &lt;n&gt; and at most &lt;m&gt; elements, each separated by a single comma
350    (",") and optional whitespace (OWS).   
351  </t>
352  <figure><preamble>
353    Thus,
354</preamble><artwork type="example">
355  1#element =&gt; element *( OWS "," OWS element )
356</artwork></figure>
357  <figure><preamble>
358    and:
359</preamble><artwork type="example">
360  #element =&gt; [ 1#element ]
361</artwork></figure>
362  <figure><preamble>
363    and for n &gt;= 1 and m &gt; 1:
364</preamble><artwork type="example">
365  &lt;n&gt;#&lt;m&gt;element =&gt; element &lt;n-1&gt;*&lt;m-1&gt;( OWS "," OWS element )
366</artwork></figure>
367  <t>
368    For compatibility with legacy list rules, recipients &SHOULD; accept empty
369    list elements. In other words, consumers would follow the list productions:
370  </t>
371<figure><artwork type="example">
372  #element =&gt; [ ( "," / element ) *( OWS "," [ OWS element ] ) ]
373 
374  1#element =&gt; *( "," OWS ) element *( OWS "," [ OWS element ] )
375</artwork></figure> 
376<t>
377  <xref target="collected.abnf"/> shows the collected ABNF, with the list rules
378  expanded as explained above.
379</t>
380</section>
381
382<section title="Basic Rules" anchor="basic.rules">
383<t anchor="rule.CRLF">
384  <x:anchor-alias value="CRLF"/>
385   HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all
386   protocol elements except the entity-body (see <xref target="tolerant.applications"/> for
387   tolerant applications). The end-of-line marker within an entity-body
388   is defined by its associated media type, as described in &media-types;.
389</t>
390<t anchor="rule.LWS">
391   This specification uses three rules to denote the use of linear
392   whitespace: OWS (optional whitespace), RWS (required whitespace), and
393   BWS ("bad" whitespace).
394</t>
395<t>
396   The OWS rule is used where zero or more linear whitespace characters may
397   appear. OWS &SHOULD; either not be produced or be produced as a single SP
398   character. Multiple OWS characters that occur within field-content &SHOULD;
399   be replaced with a single SP before interpreting the field value or
400   forwarding the message downstream.
401</t>
402<t>
403   RWS is used when at least one linear whitespace character is required to
404   separate field tokens. RWS &SHOULD; be produced as a single SP character.
405   Multiple RWS characters that occur within field-content &SHOULD; be
406   replaced with a single SP before interpreting the field value or
407   forwarding the message downstream.
408</t>
409<t>
410   BWS is used where the grammar allows optional whitespace for historical
411   reasons but senders &SHOULD-NOT; produce it in messages. HTTP/1.1
412   recipients &MUST; accept such bad optional whitespace and remove it before
413   interpreting the field value or forwarding the message downstream.
414</t>
415<t anchor="rule.whitespace">
416  <x:anchor-alias value="BWS"/>
417  <x:anchor-alias value="OWS"/>
418  <x:anchor-alias value="RWS"/>
419  <x:anchor-alias value="obs-fold"/>
420</t>
421<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="OWS"/><iref primary="true" item="Grammar" subitem="RWS"/><iref primary="true" item="Grammar" subitem="BWS"/>
422  <x:ref>OWS</x:ref>            = *( [ obs-fold ] <x:ref>WSP</x:ref> )
423                 ; "optional" whitespace
424  <x:ref>RWS</x:ref>            = 1*( [ obs-fold ] <x:ref>WSP</x:ref> )
425                 ; "required" whitespace
426  <x:ref>BWS</x:ref>            = <x:ref>OWS</x:ref>
427                 ; "bad" whitespace
428  <x:ref>obs-fold</x:ref>       = <x:ref>CRLF</x:ref>
429                 ; see <xref target="header.fields"/>
430</artwork></figure>
431<t anchor="rule.token.separators">
432  <x:anchor-alias value="tchar"/>
433  <x:anchor-alias value="token"/>
434   Many HTTP/1.1 header field values consist of words separated by whitespace
435   or special characters. These special characters &MUST; be in a quoted
436   string to be used within a parameter value (as defined in
437   <xref target="transfer.codings"/>).
438</t>
439<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="token"/><iref primary="true" item="Grammar" subitem="tchar"/>
440  <x:ref>tchar</x:ref>          = "!" / "#" / "$" / "%" / "&amp;" / "'" / "*"
441                 / "+" / "-" / "." / "^" / "_" / "`" / "|" / "~"
442                 / <x:ref>DIGIT</x:ref> / <x:ref>ALPHA</x:ref>
443                 
444  <x:ref>token</x:ref>          = 1*<x:ref>tchar</x:ref>
445</artwork></figure>
446<t anchor="rule.quoted-string">
447  <x:anchor-alias value="quoted-string"/>
448  <x:anchor-alias value="qdtext"/>
449  <x:anchor-alias value="obs-text"/>
450   A string of text is parsed as a single word if it is quoted using
451   double-quote marks.
452</t>
453<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="quoted-string"/><iref primary="true" item="Grammar" subitem="qdtext"/><iref primary="true" item="Grammar" subitem="obs-text"/>
454  <x:ref>quoted-string</x:ref>  = <x:ref>DQUOTE</x:ref> *( <x:ref>qdtext</x:ref> / <x:ref>quoted-pair</x:ref> ) <x:ref>DQUOTE</x:ref>
455  <x:ref>qdtext</x:ref>         = <x:ref>OWS</x:ref> / %x21 / %x23-5B / %x5D-7E / <x:ref>obs-text</x:ref>
456                 ; <x:ref>OWS</x:ref> / &lt;<x:ref>VCHAR</x:ref> except <x:ref>DQUOTE</x:ref> and "\"&gt; / <x:ref>obs-text</x:ref>
457  <x:ref>obs-text</x:ref>       = %x80-FF
458</artwork></figure>
459<t anchor="rule.quoted-pair">
460  <x:anchor-alias value="quoted-pair"/>
461  <x:anchor-alias value="quoted-text"/>
462   The backslash character ("\") &MAY; be used as a single-character
463   quoting mechanism only within quoted-string and comment constructs.
464</t>
465<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="quoted-text"/><iref primary="true" item="Grammar" subitem="quoted-pair"/>
466  <x:ref>quoted-text</x:ref>    = %x01-09 /
467                   %x0B-0C /
468                   %x0E-FF ; Characters excluding NUL, <x:ref>CR</x:ref> and <x:ref>LF</x:ref>
469  <x:ref>quoted-pair</x:ref>    = "\" <x:ref>quoted-text</x:ref>
470</artwork></figure>
471</section>
472
473<section title="ABNF Rules defined in other Parts of the Specification" anchor="abnf.dependencies">
474  <x:anchor-alias value="request-header"/>
475  <x:anchor-alias value="response-header"/>
476  <x:anchor-alias value="entity-body"/>
477  <x:anchor-alias value="entity-header"/>
478  <x:anchor-alias value="Cache-Control"/>
479  <x:anchor-alias value="Pragma"/>
480  <x:anchor-alias value="Warning"/>
481<t>
482  The ABNF rules below are defined in other parts:
483</t>
484<figure><!-- Part2--><artwork type="abnf2616">
485  <x:ref>request-header</x:ref>  = &lt;request-header, defined in &request-header-fields;&gt;
486  <x:ref>response-header</x:ref> = &lt;response-header, defined in &response-header-fields;&gt;
487</artwork></figure>
488<figure><!-- Part3--><artwork type="abnf2616">
489  <x:ref>entity-body</x:ref>     = &lt;entity-body, defined in &entity-body;&gt;
490  <x:ref>entity-header</x:ref>   = &lt;entity-header, defined in &entity-header-fields;&gt;
491</artwork></figure>
492<figure><!-- Part6--><artwork type="abnf2616">
493  <x:ref>Cache-Control</x:ref>   = &lt;Cache-Control, defined in &header-pragma;&gt;
494  <x:ref>Pragma</x:ref>          = &lt;Pragma, defined in &header-pragma;&gt;
495  <x:ref>Warning</x:ref>         = &lt;Warning, defined in &header-warning;&gt;
496</artwork></figure>
497</section>
498
499</section>
500</section>
501
502<section title="HTTP architecture" anchor="architecture">
503<t>
504   HTTP was created for the World Wide Web architecture
505   and has evolved over time to support the scalability needs of a worldwide
506   hypertext system. Much of that architecture is reflected in the terminology
507   and syntax productions used to define HTTP.
508</t>
509
510<section title="Client/Server Operation" anchor="operation">
511<iref item="client"/>
512<iref item="server"/>
513<iref item="connection"/>
514<t>
515   HTTP is a request/response protocol that operates by exchanging messages
516   across a reliable transport or session-layer connection. An HTTP client
517   is a program that establishes a connection to a server for the purpose
518   of sending one or more HTTP requests.  An HTTP server is a program that
519   accepts connections in order to service HTTP requests by sending HTTP
520   responses.
521</t>
522<iref item="user agent"/>
523<iref item="origin server"/>
524<t>
525   Note that the terms "client" and "server" refer only to the roles that
526   these programs perform for a particular connection.  The same program
527   may act as a client on some connections and a server on others.  We use
528   the term "user agent" to refer to the program that initiates a request,
529   such as a WWW browser, editor, or spider (web-traversing robot), and
530   the term "origin server" to refer to the program that can originate
531   authoritative responses to a request.
532</t>
533<t>
534   Most HTTP communication consists of a retrieval request (GET) for
535   a representation of some resource identified by a URI.  In the
536   simplest case, this may be accomplished via a single connection (v)
537   between the user agent (UA) and the origin server (O).
538</t>
539<figure><artwork type="drawing">
540       request chain ------------------------&gt;
541    UA -------------------v------------------- O
542       &lt;----------------------- response chain
543</artwork></figure>
544<iref item="message"/>
545<iref item="request"/>
546<iref item="response"/>
547<t>
548   A client sends an HTTP request to the server in the form of a request
549   message (<xref target="request"/>), beginning with a method, URI, and
550   protocol version, followed by MIME-like header fields containing
551   request modifiers, client information, and payload metadata, an empty
552   line, and finally the payload body (if any).
553   The server response (<xref target="response"/>) begins with a status line,
554   including the protocol version, a success or error code, and textual
555   reason phrase, followed by MIME-like header fields containing server
556   information, resource metadata, payload metadata, an empty line, and
557   finally the payload body (if any).
558</t>
559<t>
560   The following example illustrates a typical message exchange for a
561   GET request on the URI "http://www.example.com/hello.txt":
562</t>
563<figure><preamble>
564client request:
565</preamble><artwork  type="message/http; msgtype=&#34;request&#34;" x:indent-with="  ">
566GET /hello.txt HTTP/1.1
567User-Agent: curl/7.16.3 libcurl/7.16.3 OpenSSL/0.9.7l zlib/1.2.3
568Host: www.example.com
569Accept: */*
570
571</artwork></figure>
572<figure><preamble>
573server response:
574</preamble><artwork type="message/http; msgtype=&#34;response&#34;" x:indent-with="  ">
575HTTP/1.1 200 OK
576Date: Mon, 27 Jul 2009 12:28:53 GMT
577Server: Apache
578Last-Modified: Wed, 22 Jul 2009 19:15:56 GMT
579ETag: "34aa387-d-1568eb00"
580Accept-Ranges: bytes
581Content-Length: <x:length-of target="exbody"/>
582Vary: Accept-Encoding
583Content-Type: text/plain
584
585<x:span anchor="exbody">Hello World!
586</x:span></artwork></figure>
587</section>
588
589<section title="Intermediaries" anchor="intermediaries">
590<t>
591   A more complicated situation occurs when one or more intermediaries
592   are present in the request/response chain. There are three common
593   forms of intermediary: proxy, gateway, and tunnel.  In some cases,
594   a single intermediary may act as an origin server, proxy, gateway,
595   or tunnel, switching behavior based on the nature of each request.
596</t>
597<figure><artwork type="drawing">
598       request chain --------------------------------------&gt;
599    UA -----v----- A -----v----- B -----v----- C -----v----- O
600       &lt;------------------------------------- response chain
601</artwork></figure>
602<t>
603   The figure above shows three intermediaries (A, B, and C) between the
604   user agent and origin server. A request or response message that
605   travels the whole chain will pass through four separate connections.
606   Some HTTP communication options
607   may apply only to the connection with the nearest, non-tunnel
608   neighbor, only to the end-points of the chain, or to all connections
609   along the chain. Although the diagram is linear, each participant may
610   be engaged in multiple, simultaneous communications. For example, B
611   may be receiving requests from many clients other than A, and/or
612   forwarding requests to servers other than C, at the same time that it
613   is handling A's request.
614</t>
615<t>
616<iref item="upstream"/><iref item="downstream"/>
617<iref item="inbound"/><iref item="outbound"/>
618   We use the terms "upstream" and "downstream" to describe various
619   requirements in relation to the directional flow of a message:
620   all messages flow from upstream to downstream.
621   Likewise, we use the terms "inbound" and "outbound" to refer to
622   directions in relation to the request path: "inbound" means toward
623   the origin server and "outbound" means toward the user agent.
624</t>
625<t><iref item="proxy"/>
626   A proxy is a message forwarding agent that is selected by the
627   client, usually via local configuration rules, to receive requests
628   for some type(s) of absolute URI and attempt to satisfy those
629   requests via translation through the HTTP interface.  Some translations
630   are minimal, such as for proxy requests for "http" URIs, whereas
631   other requests may require translation to and from entirely different
632   application-layer protocols. Proxies are often used to group an
633   organization's HTTP requests through a common intermediary for the
634   sake of security, annotation services, or shared caching.
635</t>
636<t><iref item="gateway"/><iref item="reverse proxy"/>
637   A gateway (a.k.a., reverse proxy) is a receiving agent that acts
638   as a layer above some other server(s) and translates the received
639   requests to the underlying server's protocol.  Gateways are often
640   used for load balancing or partitioning HTTP services across
641   multiple machines.
642   Unlike a proxy, a gateway receives requests as if it were the
643   origin server for the requested resource; the requesting client
644   will not be aware that it is communicating with a gateway.
645   A gateway communicates with the client as if the gateway is the
646   origin server and thus is subject to all of the requirements on
647   origin servers for that connection.  A gateway communicates
648   with inbound servers using any protocol it desires, including
649   private extensions to HTTP that are outside the scope of this
650   specification.
651</t>
652<t><iref item="tunnel"/>
653   A tunnel acts as a blind relay between two connections
654   without changing the messages. Once active, a tunnel is not
655   considered a party to the HTTP communication, though the tunnel may
656   have been initiated by an HTTP request. A tunnel ceases to exist when
657   both ends of the relayed connection are closed. Tunnels are used to
658   extend a virtual connection through an intermediary, such as when
659   transport-layer security is used to establish private communication
660   through a shared firewall proxy.
661</t>
662</section>
663
664<section title="Caches" anchor="caches">
665<iref item="cache"/>
666<t>
667   Any party to HTTP communication that is not acting as a tunnel may
668   employ an internal cache for handling requests.
669   A cache is a local store of previous response messages and the
670   subsystem that controls its message storage, retrieval, and deletion.
671   A cache stores cacheable responses in order to reduce the response
672   time and network bandwidth consumption on future, equivalent
673   requests. Any client or server may include a cache, though a cache
674   cannot be used by a server while it is acting as a tunnel.
675</t>
676<t>
677   The effect of a cache is that the request/response chain is shortened
678   if one of the participants along the chain has a cached response
679   applicable to that request. The following illustrates the resulting
680   chain if B has a cached copy of an earlier response from O (via C)
681   for a request which has not been cached by UA or A.
682</t>
683<figure><artwork type="drawing">
684          request chain ----------&gt;
685       UA -----v----- A -----v----- B - - - - - - C - - - - - - O
686          &lt;--------- response chain
687</artwork></figure>
688<t><iref item="cacheable"/>
689   A response is cacheable if a cache is allowed to store a copy of
690   the response message for use in answering subsequent requests.
691   Even when a response is cacheable, there may be additional
692   constraints placed by the client or by the origin server on when
693   that cached response can be used for a particular request. HTTP
694   requirements for cache behavior and cacheable responses are
695   defined in &caching-overview;. 
696</t>
697<t>
698   There are a wide variety of architectures and configurations
699   of caches and proxies deployed across the World Wide Web and
700   inside large organizations. These systems include national hierarchies
701   of proxy caches to save transoceanic bandwidth, systems that
702   broadcast or multicast cache entries, organizations that distribute
703   subsets of cached data via optical media, and so on.
704</t>
705</section>
706
707<section title="Transport Independence" anchor="transport-independence">
708<t>
709  HTTP systems are used in a wide variety of environments, from
710  corporate intranets with high-bandwidth links to long-distance
711  communication over low-power radio links and intermittent connectivity.
712</t>
713<t>
714   HTTP communication usually takes place over TCP/IP connections. The
715   default port is TCP 80 (<eref target="http://www.iana.org/assignments/port-numbers"/>), but other ports can be used. This does
716   not preclude HTTP from being implemented on top of any other protocol
717   on the Internet, or on other networks. HTTP only presumes a reliable
718   transport; any protocol that provides such guarantees can be used;
719   the mapping of the HTTP/1.1 request and response structures onto the
720   transport data units of the protocol in question is outside the scope
721   of this specification.
722</t>
723<t>
724   In HTTP/1.0, most implementations used a new connection for each
725   request/response exchange. In HTTP/1.1, a connection may be used for
726   one or more request/response exchanges, although connections may be
727   closed for a variety of reasons (see <xref target="persistent.connections"/>).
728</t>
729</section>
730
731<section title="HTTP Version" anchor="http.version">
732  <x:anchor-alias value="HTTP-Version"/>
733  <x:anchor-alias value="HTTP-Prot-Name"/>
734<t>
735   HTTP uses a "&lt;major&gt;.&lt;minor&gt;" numbering scheme to indicate versions
736   of the protocol. The protocol versioning policy is intended to allow
737   the sender to indicate the format of a message and its capacity for
738   understanding further HTTP communication, rather than the features
739   obtained via that communication. No change is made to the version
740   number for the addition of message components which do not affect
741   communication behavior or which only add to extensible field values.
742   The &lt;minor&gt; number is incremented when the changes made to the
743   protocol add features which do not change the general message parsing
744   algorithm, but which may add to the message semantics and imply
745   additional capabilities of the sender. The &lt;major&gt; number is
746   incremented when the format of a message within the protocol is
747   changed. See <xref target="RFC2145"/> for a fuller explanation.
748</t>
749<t>
750   The version of an HTTP message is indicated by an HTTP-Version field
751   in the first line of the message. HTTP-Version is case-sensitive.
752</t>
753<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="HTTP-Version"/><iref primary="true" item="Grammar" subitem="HTTP-Prot-Name"/>
754  <x:ref>HTTP-Version</x:ref>   = <x:ref>HTTP-Prot-Name</x:ref> "/" 1*<x:ref>DIGIT</x:ref> "." 1*<x:ref>DIGIT</x:ref>
755  <x:ref>HTTP-Prot-Name</x:ref> = <x:abnf-char-sequence>"HTTP"</x:abnf-char-sequence> ; "HTTP", case-sensitive
756</artwork></figure>
757<t>
758   Note that the major and minor numbers &MUST; be treated as separate
759   integers and that each &MAY; be incremented higher than a single digit.
760   Thus, HTTP/2.4 is a lower version than HTTP/2.13, which in turn is
761   lower than HTTP/12.3. Leading zeros &MUST; be ignored by recipients and
762   &MUST-NOT; be sent.
763</t>
764<t>
765   An application that sends a request or response message that includes
766   HTTP-Version of "HTTP/1.1" &MUST; be at least conditionally compliant
767   with this specification. Applications that are at least conditionally
768   compliant with this specification &SHOULD; use an HTTP-Version of
769   "HTTP/1.1" in their messages, and &MUST; do so for any message that is
770   not compatible with HTTP/1.0. For more details on when to send
771   specific HTTP-Version values, see <xref target="RFC2145"/>.
772</t>
773<t>
774   The HTTP version of an application is the highest HTTP version for
775   which the application is at least conditionally compliant.
776</t>
777<t>
778   Proxy and gateway applications need to be careful when forwarding
779   messages in protocol versions different from that of the application.
780   Since the protocol version indicates the protocol capability of the
781   sender, a proxy/gateway &MUST-NOT; send a message with a version
782   indicator which is greater than its actual version. If a higher
783   version request is received, the proxy/gateway &MUST; either downgrade
784   the request version, or respond with an error, or switch to tunnel
785   behavior.
786</t>
787<t>
788   Due to interoperability problems with HTTP/1.0 proxies discovered
789   since the publication of <xref target="RFC2068"/>, caching proxies &MUST;, gateways
790   &MAY;, and tunnels &MUST-NOT; upgrade the request to the highest version
791   they support. The proxy/gateway's response to that request &MUST; be in
792   the same major version as the request.
793</t>
794<x:note>
795  <t>
796    <x:h>Note:</x:h> Converting between versions of HTTP may involve modification
797    of header fields required or forbidden by the versions involved.
798  </t>
799</x:note>
800</section>
801
802<section title="Uniform Resource Identifiers" anchor="uri">
803<iref primary="true" item="resource"/>
804<t>
805   Uniform Resource Identifiers (URIs) <xref target="RFC3986"/> are used
806   throughout HTTP as the means for identifying resources. URI references
807   are used to target requests, indicate redirects, and define relationships.
808   HTTP does not limit what a resource may be; it merely defines an interface
809   that can be used to interact with a resource via HTTP. More information on
810   the scope of URIs and resources can be found in <xref target="RFC3986"/>.
811</t>
812  <x:anchor-alias value="URI"/>
813  <x:anchor-alias value="URI-reference"/>
814  <x:anchor-alias value="absolute-URI"/>
815  <x:anchor-alias value="relative-part"/>
816  <x:anchor-alias value="authority"/>
817  <x:anchor-alias value="path-abempty"/>
818  <x:anchor-alias value="path-absolute"/>
819  <x:anchor-alias value="port"/>
820  <x:anchor-alias value="query"/>
821  <x:anchor-alias value="uri-host"/>
822  <x:anchor-alias value="partial-URI"/>
823<t>
824   This specification adopts the definitions of "URI-reference",
825   "absolute-URI", "relative-part", "port", "host",
826   "path-abempty", "path-absolute", "query", and "authority" from
827   <xref target="RFC3986"/>. In addition, we define a partial-URI rule for
828   protocol elements that allow a relative URI without a fragment.
829</t>
830<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="URI-reference"/><iref primary="true" item="Grammar" subitem="absolute-URI"/><iref primary="true" item="Grammar" subitem="authority"/><iref primary="true" item="Grammar" subitem="path-absolute"/><iref primary="true" item="Grammar" subitem="port"/><iref primary="true" item="Grammar" subitem="query"/><iref primary="true" item="Grammar" subitem="uri-host"/>
831  <x:ref>URI</x:ref>           = &lt;URI, defined in <xref target="RFC3986" x:fmt="," x:sec="3"/>&gt;
832  <x:ref>URI-reference</x:ref> = &lt;URI-reference, defined in <xref target="RFC3986" x:fmt="," x:sec="4.1"/>&gt;
833  <x:ref>absolute-URI</x:ref>  = &lt;absolute-URI, defined in <xref target="RFC3986" x:fmt="," x:sec="4.3"/>&gt;
834  <x:ref>relative-part</x:ref> = &lt;relative-part, defined in <xref target="RFC3986" x:fmt="," x:sec="4.2"/>&gt;
835  <x:ref>authority</x:ref>     = &lt;authority, defined in <xref target="RFC3986" x:fmt="," x:sec="3.2"/>&gt;
836  <x:ref>path-abempty</x:ref>  = &lt;path-abempty, defined in <xref target="RFC3986" x:fmt="," x:sec="3.3"/>&gt;
837  <x:ref>path-absolute</x:ref> = &lt;path-absolute, defined in <xref target="RFC3986" x:fmt="," x:sec="3.3"/>&gt;
838  <x:ref>port</x:ref>          = &lt;port, defined in <xref target="RFC3986" x:fmt="," x:sec="3.2.3"/>&gt;
839  <x:ref>query</x:ref>         = &lt;query, defined in <xref target="RFC3986" x:fmt="," x:sec="3.4"/>&gt;
840  <x:ref>uri-host</x:ref>      = &lt;host, defined in <xref target="RFC3986" x:fmt="," x:sec="3.2.2"/>&gt;
841 
842  <x:ref>partial-URI</x:ref>   = relative-part [ "?" query ]
843</artwork></figure>
844<t>
845   Each protocol element in HTTP that allows a URI reference will indicate in
846   its ABNF production whether the element allows only a URI in absolute form
847   (absolute-URI), any relative reference (relative-ref), or some other subset
848   of the URI-reference grammar. Unless otherwise indicated, URI references
849   are parsed relative to the request target (the default base URI for both
850   the request and its corresponding response).
851</t>
852
853<section title="http URI scheme" anchor="http.uri">
854  <x:anchor-alias value="http-URI"/>
855  <iref item="http URI scheme" primary="true"/>
856  <iref item="URI scheme" subitem="http" primary="true"/>
857<t>
858   The "http" URI scheme is hereby defined for the purpose of minting
859   identifiers according to their association with the hierarchical
860   namespace governed by a potential HTTP origin server listening for
861   TCP connections on a given port.
862   The HTTP server is identified via the generic syntax's
863   <x:ref>authority</x:ref> component, which includes a host
864   identifier and optional TCP port, and the remainder of the URI is
865   considered to be identifying data corresponding to a resource for
866   which that server might provide an HTTP interface.
867</t>
868<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="http-URI"/>
869  <x:ref>http-URI</x:ref> = "http:" "//" <x:ref>authority</x:ref> <x:ref>path-abempty</x:ref> [ "?" <x:ref>query</x:ref> ]
870</artwork></figure>
871<t>
872   The host identifier within an <x:ref>authority</x:ref> component is
873   defined in <xref target="RFC3986" x:fmt="," x:sec="3.2.2"/>.  If host is
874   provided as an IP literal or IPv4 address, then the HTTP server is any
875   listener on the indicated TCP port at that IP address. If host is a
876   registered name, then that name is considered an indirect identifier
877   and the recipient might use a name resolution service, such as DNS,
878   to find the address of a listener for that host.
879   The host &MUST-NOT; be empty; if an "http" URI is received with an
880   empty host, then it &MUST; be rejected as invalid.
881   If the port subcomponent is empty or not given, then TCP port 80 is
882   assumed (the default reserved port for WWW services).
883</t>
884<t>
885   Regardless of the form of host identifier, access to that host is not
886   implied by the mere presence of its name or address. The host may or may
887   not exist and, even when it does exist, may or may not be running an
888   HTTP server or listening to the indicated port. The "http" URI scheme
889   makes use of the delegated nature of Internet names and addresses to
890   establish a naming authority (whatever entity has the ability to place
891   an HTTP server at that Internet name or address) and allows that
892   authority to determine which names are valid and how they might be used.
893</t>
894<t>
895   When an "http" URI is used within a context that calls for access to the
896   indicated resource, a client &MAY; attempt access by resolving
897   the host to an IP address, establishing a TCP connection to that address
898   on the indicated port, and sending an HTTP request message to the server
899   containing the URI's identifying data as described in <xref target="request"/>.
900   If the server responds to that request with a non-interim HTTP response
901   message, as described in <xref target="response"/>, then that response
902   is considered an authoritative answer to the client's request.
903</t>
904<t>
905   Although HTTP is independent of the transport protocol, the "http"
906   scheme is specific to TCP-based services because the name delegation
907   process depends on TCP for establishing authority.
908   An HTTP service based on some other underlying connection protocol
909   would presumably be identified using a different URI scheme, just as
910   the "https" scheme (below) is used for servers that require an SSL/TLS
911   transport layer on a connection. Other protocols may also be used to
912   provide access to "http" identified resources --- it is only the
913   authoritative interface used for mapping the namespace that is
914   specific to TCP.
915</t>
916</section>
917
918<section title="https URI scheme" anchor="https.uri">
919   <x:anchor-alias value="https-URI"/>
920   <iref item="https URI scheme"/>
921   <iref item="URI scheme" subitem="https"/>
922<t>
923   The "https" URI scheme is hereby defined for the purpose of minting
924   identifiers according to their association with the hierarchical
925   namespace governed by a potential HTTP origin server listening for
926   SSL/TLS-secured connections on a given TCP port.
927   The host and port are determined in the same way
928   as for the "http" scheme, except that a default TCP port of 443
929   is assumed if the port subcomponent is empty or not given.
930</t>
931<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="https-URI"/>
932  <x:ref>https-URI</x:ref> = "https:" "//" <x:ref>authority</x:ref> <x:ref>path-abempty</x:ref> [ "?" <x:ref>query</x:ref> ]
933</artwork></figure>
934<t>
935   The primary difference between the "http" and "https" schemes is
936   that interaction with the latter is required to be secured for
937   privacy through the use of strong encryption. The URI cannot be
938   sent in a request until the connection is secure. Likewise, the
939   default for caching is that each response that would be considered
940   "public" under the "http" scheme is instead treated as "private"
941   and thus not eligible for shared caching.
942</t>
943<t>
944   The process for authoritative access to an "https" identified
945   resource is defined in <xref target="RFC2818"/>.
946</t>
947</section>
948
949<section title="http and https URI Normalization and Comparison" anchor="uri.comparison">
950<t>
951   Since the "http" and "https" schemes conform to the URI generic syntax,
952   such URIs are normalized and compared according to the algorithm defined
953   in <xref target="RFC3986" x:fmt="," x:sec="6"/>, using the defaults
954   described above for each scheme.
955</t>
956<t>
957   If the port is equal to the default port for a scheme, the normal
958   form is to elide the port subcomponent. Likewise, an empty path
959   component is equivalent to an absolute path of "/", so the normal
960   form is to provide a path of "/" instead. The scheme and host
961   are case-insensitive and normally provided in lowercase; all
962   other components are compared in a case-sensitive manner.
963   Characters other than those in the "reserved" set are equivalent
964   to their percent-encoded octets (see <xref target="RFC3986"
965   x:fmt="," x:sec="2.1"/>): the normal form is to not encode them.
966</t>
967<t>
968   For example, the following three URIs are equivalent:
969</t>
970<figure><artwork type="example">
971   http://example.com:80/~smith/home.html
972   http://EXAMPLE.com/%7Esmith/home.html
973   http://EXAMPLE.com:/%7esmith/home.html
974</artwork></figure>
975<t>
976   <cref>[[This paragraph does not belong here. --Roy]]</cref>
977   If path-abempty is the empty string (i.e., there is no slash "/"
978   path separator following the authority), then the "http" URI
979   &MUST; be given as "/" when
980   used as a request-target (<xref target="request-target"/>). If a proxy
981   receives a host name which is not a fully qualified domain name, it
982   &MAY; add its domain to the host name it received. If a proxy receives
983   a fully qualified domain name, the proxy &MUST-NOT; change the host
984   name.
985</t>
986</section>
987</section>
988
989<section title="HTTP Message" anchor="http.message">
990<x:anchor-alias value="generic-message"/>
991<x:anchor-alias value="message.types"/>
992<x:anchor-alias value="HTTP-message"/>
993<x:anchor-alias value="start-line"/>
994<iref item="header section"/>
995<iref item="headers"/>
996<iref item="header field"/>
997<t>
998   All HTTP/1.1 messages consist of a start-line followed by a sequence of
999   characters in a format similar to the Internet Message Format
1000   <xref target="RFC5322"/>: zero or more header fields (collectively
1001   referred to as the "headers" or the "header section"), an empty line
1002   indicating the end of the header section, and an optional message-body.
1003</t>
1004<t>
1005   An HTTP message can either be a request from client to server or a
1006   response from server to client.  Syntactically, the two types of message
1007   differ only in the start-line, which is either a Request-Line (for requests)
1008   or a Status-Line (for responses), and in the algorithm for determining
1009   the length of the message-body (<xref target="message.length"/>).
1010   In theory, a client could receive requests and a server could receive
1011   responses, distinguishing them by their different start-line formats,
1012   but in practice servers are implemented to only expect a request
1013   (a response is interpreted as an unknown or invalid request method)
1014   and clients are implemented to only expect a response.
1015</t>
1016<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="HTTP-message"/>
1017  <x:ref>HTTP-message</x:ref>    = <x:ref>start-line</x:ref>
1018                    *( <x:ref>header-field</x:ref> <x:ref>CRLF</x:ref> )
1019                    <x:ref>CRLF</x:ref>
1020                    [ <x:ref>message-body</x:ref> ]
1021  <x:ref>start-line</x:ref>      = <x:ref>Request-Line</x:ref> / <x:ref>Status-Line</x:ref>
1022</artwork></figure>
1023<t>
1024   Whitespace (WSP) &MUST-NOT; be sent between the start-line and the first
1025   header field. The presence of whitespace might be an attempt to trick a
1026   noncompliant implementation of HTTP into ignoring that field or processing
1027   the next line as a new request, either of which may result in security
1028   issues when implementations within the request chain interpret the
1029   same message differently. HTTP/1.1 servers &MUST; reject such a message
1030   with a 400 (Bad Request) response.
1031</t>
1032
1033<section title="Message Parsing Robustness" anchor="message.robustness">
1034<t>
1035   In the interest of robustness, servers &SHOULD; ignore at least one
1036   empty line received where a Request-Line is expected. In other words, if
1037   the server is reading the protocol stream at the beginning of a
1038   message and receives a CRLF first, it should ignore the CRLF.
1039</t>
1040<t>
1041   Some old HTTP/1.0 client implementations generate an extra CRLF
1042   after a POST request as a lame workaround for some early server
1043   applications that failed to read message-body content that was
1044   not terminated by a line-ending. An HTTP/1.1 client &MUST-NOT;
1045   preface or follow a request with an extra CRLF.  If terminating
1046   the request message-body with a line-ending is desired, then the
1047   client &MUST; include the terminating CRLF octets as part of the
1048   message-body length.
1049</t>
1050<t>
1051   The normal procedure for parsing an HTTP message is to read the
1052   start-line into a structure, read each header field into a hash
1053   table by field name until the empty line, and then use the parsed
1054   data to determine if a message-body is expected.  If a message-body
1055   has been indicated, then it is read as a stream until an amount
1056   of OCTETs equal to the message-length is read or the connection
1057   is closed.  Care must be taken to parse an HTTP message as a sequence
1058   of OCTETs in an encoding that is a superset of US-ASCII.  Attempting
1059   to parse HTTP as a stream of Unicode characters in a character encoding
1060   like UTF-16 may introduce security flaws due to the differing ways
1061   that such parsers interpret invalid characters.
1062</t>
1063</section>
1064
1065<section title="Header Fields" anchor="header.fields">
1066  <x:anchor-alias value="header-field"/>
1067  <x:anchor-alias value="field-content"/>
1068  <x:anchor-alias value="field-name"/>
1069  <x:anchor-alias value="field-value"/>
1070  <x:anchor-alias value="OWS"/>
1071<t>
1072   Each HTTP header field consists of a case-insensitive field name
1073   followed by a colon (":"), optional whitespace, and the field value.
1074</t>
1075<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="header-field"/><iref primary="true" item="Grammar" subitem="field-name"/><iref primary="true" item="Grammar" subitem="field-value"/><iref primary="true" item="Grammar" subitem="field-content"/>
1076  <x:ref>header-field</x:ref>   = <x:ref>field-name</x:ref> ":" OWS [ <x:ref>field-value</x:ref> ] OWS
1077  <x:ref>field-name</x:ref>     = <x:ref>token</x:ref>
1078  <x:ref>field-value</x:ref>    = *( <x:ref>field-content</x:ref> / <x:ref>OWS</x:ref> )
1079  <x:ref>field-content</x:ref>  = *( <x:ref>WSP</x:ref> / <x:ref>VCHAR</x:ref> / <x:ref>obs-text</x:ref> )
1080</artwork></figure>
1081<t>
1082   No whitespace is allowed between the header field name and colon. For
1083   security reasons, any request message received containing such whitespace
1084   &MUST; be rejected with a response code of 400 (Bad Request). A proxy
1085   &MUST; remove any such whitespace from a response message before
1086   forwarding the message downstream.
1087</t>
1088<t>
1089   A field value &MAY; be preceded by optional whitespace (OWS); a single SP is
1090   preferred. The field value does not include any leading or trailing white
1091   space: OWS occurring before the first non-whitespace character of the
1092   field value or after the last non-whitespace character of the field value
1093   is ignored and &SHOULD; be removed without changing the meaning of the header
1094   field.
1095</t>
1096<t>
1097   The order in which header fields with differing field names are
1098   received is not significant. However, it is "good practice" to send
1099   header fields that contain control data first, such as Host on
1100   requests and Date on responses, so that implementations can decide
1101   when not to handle a message as early as possible.  A server &MUST;
1102   wait until the entire header section is received before interpreting
1103   a request message, since later header fields might include conditionals,
1104   authentication credentials, or deliberately misleading duplicate
1105   header fields that would impact request processing.
1106</t>
1107<t>
1108   Multiple header fields with the same field name &MUST-NOT; be
1109   sent in a message unless the entire field value for that
1110   header field is defined as a comma-separated list [i.e., #(values)].
1111   Multiple header fields with the same field name can be combined into
1112   one "field-name: field-value" pair, without changing the semantics of the
1113   message, by appending each subsequent field value to the combined
1114   field value in order, separated by a comma. The order in which
1115   header fields with the same field name are received is therefore
1116   significant to the interpretation of the combined field value;
1117   a proxy &MUST-NOT; change the order of these field values when
1118   forwarding a message.
1119</t>
1120<x:note>
1121  <t>
1122   <x:h>Note:</x:h> the "Set-Cookie" header as implemented in
1123   practice (as opposed to how it is specified in <xref target="RFC2109"/>)
1124   can occur multiple times, but does not use the list syntax, and thus cannot
1125   be combined into a single line. (See Appendix A.2.3 of <xref target="Kri2001"/>
1126   for details.) Also note that the Set-Cookie2 header specified in
1127   <xref target="RFC2965"/> does not share this problem.
1128  </t>
1129</x:note>
1130<t>
1131   Historically, HTTP header field values could be extended over multiple
1132   lines by preceding each extra line with at least one space or horizontal
1133   tab character (line folding). This specification deprecates such line
1134   folding except within the message/http media type
1135   (<xref target="internet.media.type.message.http"/>).
1136   HTTP/1.1 senders &MUST-NOT; produce messages that include line folding
1137   (i.e., that contain any field-content that matches the obs-fold rule) unless
1138   the message is intended for packaging within the message/http media type.
1139   HTTP/1.1 recipients &SHOULD; accept line folding and replace any embedded
1140   obs-fold whitespace with a single SP prior to interpreting the field value
1141   or forwarding the message downstream.
1142</t>
1143<t>
1144   Historically, HTTP has allowed field content with text in the ISO-8859-1
1145   <xref target="ISO-8859-1"/> character encoding and supported other
1146   character sets only through use of <xref target="RFC2047"/> encoding.
1147   In practice, most HTTP header field values use only a subset of the
1148   US-ASCII character encoding <xref target="USASCII"/>. Newly defined
1149   header fields &SHOULD; limit their field values to US-ASCII characters.
1150   Recipients &SHOULD; treat other (obs-text) octets in field content as
1151   opaque data.
1152</t>
1153<t anchor="rule.comment">
1154  <x:anchor-alias value="comment"/>
1155  <x:anchor-alias value="ctext"/>
1156   Comments can be included in some HTTP header fields by surrounding
1157   the comment text with parentheses. Comments are only allowed in
1158   fields containing "comment" as part of their field value definition.
1159</t>
1160<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="comment"/><iref primary="true" item="Grammar" subitem="ctext"/>
1161  <x:ref>comment</x:ref>        = "(" *( <x:ref>ctext</x:ref> / <x:ref>quoted-pair</x:ref> / <x:ref>comment</x:ref> ) ")"
1162  <x:ref>ctext</x:ref>          = <x:ref>OWS</x:ref> / %x21-27 / %x2A-5B / %x5D-7E / <x:ref>obs-text</x:ref>
1163                 ; <x:ref>OWS</x:ref> / &lt;<x:ref>VCHAR</x:ref> except "(", ")", and "\"&gt; / <x:ref>obs-text</x:ref>
1164</artwork></figure>
1165 
1166</section>
1167
1168<section title="Message Body" anchor="message.body">
1169  <x:anchor-alias value="message-body"/>
1170<t>
1171   The message-body (if any) of an HTTP message is used to carry the
1172   entity-body associated with the request or response. The message-body
1173   differs from the entity-body only when a transfer-coding has been
1174   applied, as indicated by the Transfer-Encoding header field (<xref target="header.transfer-encoding"/>).
1175</t>
1176<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="message-body"/>
1177  <x:ref>message-body</x:ref> = <x:ref>entity-body</x:ref>
1178               / &lt;entity-body encoded as per <x:ref>Transfer-Encoding</x:ref>&gt;
1179</artwork></figure>
1180<t>
1181   Transfer-Encoding &MUST; be used to indicate any transfer-codings
1182   applied by an application to ensure safe and proper transfer of the
1183   message. Transfer-Encoding is a property of the message, not of the
1184   entity, and thus &MAY; be added or removed by any application along the
1185   request/response chain. (However, <xref target="transfer.codings"/> places restrictions on
1186   when certain transfer-codings may be used.)
1187</t>
1188<t>
1189   The rules for when a message-body is allowed in a message differ for
1190   requests and responses.
1191</t>
1192<t>
1193   The presence of a message-body in a request is signaled by the
1194   inclusion of a Content-Length or Transfer-Encoding header field in
1195   the request's header fields.
1196   When a request message contains both a message-body of non-zero
1197   length and a method that does not define any semantics for that
1198   request message-body, then an origin server &SHOULD; either ignore
1199   the message-body or respond with an appropriate error message
1200   (e.g., 413).  A proxy or gateway, when presented the same request,
1201   &SHOULD; either forward the request inbound with the message-body or
1202   ignore the message-body when determining a response.
1203</t>
1204<t>
1205   For response messages, whether or not a message-body is included with
1206   a message is dependent on both the request method and the response
1207   status code (<xref target="status.code.and.reason.phrase"/>). All responses to the HEAD request method
1208   &MUST-NOT; include a message-body, even though the presence of entity-header
1209   fields might lead one to believe they do. All 1xx
1210   (informational), 204 (No Content), and 304 (Not Modified) responses
1211   &MUST-NOT; include a message-body. All other responses do include a
1212   message-body, although it &MAY; be of zero length.
1213</t>
1214</section>
1215
1216<section title="Message Length" anchor="message.length">
1217<t>
1218   The transfer-length of a message is the length of the message-body as
1219   it appears in the message; that is, after any transfer-codings have
1220   been applied. When a message-body is included with a message, the
1221   transfer-length of that body is determined by one of the following
1222   (in order of precedence):
1223</t>
1224<t>
1225  <list style="numbers">
1226    <x:lt><t>
1227     Any response message which "&MUST-NOT;" include a message-body (such
1228     as the 1xx, 204, and 304 responses and any response to a HEAD
1229     request) is always terminated by the first empty line after the
1230     header fields, regardless of the entity-header fields present in
1231     the message.
1232    </t></x:lt>
1233    <x:lt><t>
1234     If a Transfer-Encoding header field (<xref target="header.transfer-encoding"/>)
1235     is present and the "chunked" transfer-coding (<xref target="transfer.codings"/>)
1236     is used, the transfer-length is defined by the use of this transfer-coding.
1237     If a Transfer-Encoding header field is present and the "chunked" transfer-coding
1238     is not present, the transfer-length is defined by the sender closing the connection.
1239    </t></x:lt>
1240    <x:lt><t>
1241     If a Content-Length header field (<xref target="header.content-length"/>) is present, its
1242     value in OCTETs represents both the entity-length and the
1243     transfer-length. The Content-Length header field &MUST-NOT; be sent
1244     if these two lengths are different (i.e., if a Transfer-Encoding
1245     header field is present). If a message is received with both a
1246     Transfer-Encoding header field and a Content-Length header field,
1247     the latter &MUST; be ignored.
1248    </t></x:lt>
1249    <x:lt><t>
1250     If the message uses the media type "multipart/byteranges", and the
1251     transfer-length is not otherwise specified, then this self-delimiting
1252     media type defines the transfer-length. This media type
1253     &MUST-NOT; be used unless the sender knows that the recipient can parse
1254     it; the presence in a request of a Range header with multiple byte-range
1255     specifiers from a 1.1 client implies that the client can parse
1256     multipart/byteranges responses.
1257    <list style="empty"><t>
1258       A range header might be forwarded by a 1.0 proxy that does not
1259       understand multipart/byteranges; in this case the server &MUST;
1260       delimit the message using methods defined in items 1, 3 or 5 of
1261       this section.
1262    </t></list>
1263    </t></x:lt>
1264    <x:lt><t>
1265     By the server closing the connection. (Closing the connection
1266     cannot be used to indicate the end of a request body, since that
1267     would leave no possibility for the server to send back a response.)
1268    </t></x:lt>
1269  </list>
1270</t>
1271<t>
1272   For compatibility with HTTP/1.0 applications, HTTP/1.1 requests
1273   containing a message-body &MUST; include a valid Content-Length header
1274   field unless the server is known to be HTTP/1.1 compliant. If a
1275   request contains a message-body and a Content-Length is not given,
1276   the server &SHOULD; respond with 400 (Bad Request) if it cannot
1277   determine the length of the message, or with 411 (Length Required) if
1278   it wishes to insist on receiving a valid Content-Length.
1279</t>
1280<t>
1281   All HTTP/1.1 applications that receive entities &MUST; accept the
1282   "chunked" transfer-coding (<xref target="transfer.codings"/>), thus allowing this mechanism
1283   to be used for messages when the message length cannot be determined
1284   in advance.
1285</t>
1286<t>
1287   Messages &MUST-NOT; include both a Content-Length header field and a
1288   transfer-coding. If the message does include a
1289   transfer-coding, the Content-Length &MUST; be ignored.
1290</t>
1291<t>
1292   When a Content-Length is given in a message where a message-body is
1293   allowed, its field value &MUST; exactly match the number of OCTETs in
1294   the message-body. HTTP/1.1 user agents &MUST; notify the user when an
1295   invalid length is received and detected.
1296</t>
1297</section>
1298
1299<section title="General Header Fields" anchor="general.header.fields">
1300  <x:anchor-alias value="general-header"/>
1301<t>
1302   There are a few header fields which have general applicability for
1303   both request and response messages, but which do not apply to the
1304   entity being transferred. These header fields apply only to the
1305   message being transmitted.
1306</t>
1307<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="general-header"/>
1308  <x:ref>general-header</x:ref> = <x:ref>Cache-Control</x:ref>            ; &header-cache-control;
1309                 / <x:ref>Connection</x:ref>               ; <xref target="header.connection"/>
1310                 / <x:ref>Date</x:ref>                     ; <xref target="header.date"/>
1311                 / <x:ref>Pragma</x:ref>                   ; &header-pragma;
1312                 / <x:ref>Trailer</x:ref>                  ; <xref target="header.trailer"/>
1313                 / <x:ref>Transfer-Encoding</x:ref>        ; <xref target="header.transfer-encoding"/>
1314                 / <x:ref>Upgrade</x:ref>                  ; <xref target="header.upgrade"/>
1315                 / <x:ref>Via</x:ref>                      ; <xref target="header.via"/>
1316                 / <x:ref>Warning</x:ref>                  ; &header-warning;
1317</artwork></figure>
1318<t>
1319   General-header field names can be extended reliably only in
1320   combination with a change in the protocol version. However, new or
1321   experimental header fields may be given the semantics of general
1322   header fields if all parties in the communication recognize them to
1323   be general-header fields. Unrecognized header fields are treated as
1324   entity-header fields.
1325</t>
1326</section>
1327</section>
1328
1329<section title="Request" anchor="request">
1330  <x:anchor-alias value="Request"/>
1331<t>
1332   A request message from a client to a server includes, within the
1333   first line of that message, the method to be applied to the resource,
1334   the identifier of the resource, and the protocol version in use.
1335</t>
1336<!--                 Host                      ; should be moved here eventually -->
1337<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Request"/>
1338  <x:ref>Request</x:ref>       = <x:ref>Request-Line</x:ref>              ; <xref target="request-line"/>
1339                  *(( <x:ref>general-header</x:ref>        ; <xref target="general.header.fields"/>
1340                   / <x:ref>request-header</x:ref>         ; &request-header-fields;
1341                   / <x:ref>entity-header</x:ref> ) <x:ref>CRLF</x:ref> ) ; &entity-header-fields;
1342                  <x:ref>CRLF</x:ref>
1343                  [ <x:ref>message-body</x:ref> ]          ; <xref target="message.body"/>
1344</artwork></figure>
1345
1346<section title="Request-Line" anchor="request-line">
1347  <x:anchor-alias value="Request-Line"/>
1348<t>
1349   The Request-Line begins with a method token, followed by the
1350   request-target and the protocol version, and ending with CRLF. The
1351   elements are separated by SP characters. No CR or LF is allowed
1352   except in the final CRLF sequence.
1353</t>
1354<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Request-Line"/>
1355  <x:ref>Request-Line</x:ref>   = <x:ref>Method</x:ref> <x:ref>SP</x:ref> <x:ref>request-target</x:ref> <x:ref>SP</x:ref> <x:ref>HTTP-Version</x:ref> <x:ref>CRLF</x:ref>
1356</artwork></figure>
1357
1358<section title="Method" anchor="method">
1359  <x:anchor-alias value="Method"/>
1360<t>
1361   The Method  token indicates the method to be performed on the
1362   resource identified by the request-target. The method is case-sensitive.
1363</t>
1364<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Method"/><iref primary="true" item="Grammar" subitem="extension-method"/>
1365  <x:ref>Method</x:ref>         = <x:ref>token</x:ref>
1366</artwork></figure>
1367</section>
1368
1369<section title="request-target" anchor="request-target">
1370  <x:anchor-alias value="request-target"/>
1371<t>
1372   The request-target
1373   identifies the resource upon which to apply the request.
1374</t>
1375<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="request-target"/>
1376  <x:ref>request-target</x:ref> = "*"
1377                 / <x:ref>absolute-URI</x:ref>
1378                 / ( <x:ref>path-absolute</x:ref> [ "?" <x:ref>query</x:ref> ] )
1379                 / <x:ref>authority</x:ref>
1380</artwork></figure>
1381<t>
1382   The four options for request-target are dependent on the nature of the
1383   request. The asterisk "*" means that the request does not apply to a
1384   particular resource, but to the server itself, and is only allowed
1385   when the method used does not necessarily apply to a resource. One
1386   example would be
1387</t>
1388<figure><artwork type="example">
1389  OPTIONS * HTTP/1.1
1390</artwork></figure>
1391<t>
1392   The absolute-URI form is &REQUIRED; when the request is being made to a
1393   proxy. The proxy is requested to forward the request or service it
1394   from a valid cache, and return the response. Note that the proxy &MAY;
1395   forward the request on to another proxy or directly to the server
1396   specified by the absolute-URI. In order to avoid request loops, a
1397   proxy &MUST; be able to recognize all of its server names, including
1398   any aliases, local variations, and the numeric IP address. An example
1399   Request-Line would be:
1400</t>
1401<figure><artwork type="example">
1402  GET http://www.example.org/pub/WWW/TheProject.html HTTP/1.1
1403</artwork></figure>
1404<t>
1405   To allow for transition to absolute-URIs in all requests in future
1406   versions of HTTP, all HTTP/1.1 servers &MUST; accept the absolute-URI
1407   form in requests, even though HTTP/1.1 clients will only generate
1408   them in requests to proxies.
1409</t>
1410<t>
1411   The authority form is only used by the CONNECT method (&CONNECT;).
1412</t>
1413<t>
1414   The most common form of request-target is that used to identify a
1415   resource on an origin server or gateway. In this case the absolute
1416   path of the URI &MUST; be transmitted (see <xref target="http.uri"/>, path-absolute) as
1417   the request-target, and the network location of the URI (authority) &MUST;
1418   be transmitted in a Host header field. For example, a client wishing
1419   to retrieve the resource above directly from the origin server would
1420   create a TCP connection to port 80 of the host "www.example.org" and send
1421   the lines:
1422</t>
1423<figure><artwork type="example">
1424  GET /pub/WWW/TheProject.html HTTP/1.1
1425  Host: www.example.org
1426</artwork></figure>
1427<t>
1428   followed by the remainder of the Request. Note that the absolute path
1429   cannot be empty; if none is present in the original URI, it &MUST; be
1430   given as "/" (the server root).
1431</t>
1432<t>
1433   If a proxy receives a request without any path in the request-target and
1434   the method specified is capable of supporting the asterisk form of
1435   request-target, then the last proxy on the request chain &MUST; forward the
1436   request with "*" as the final request-target.
1437</t>
1438<figure><preamble>  
1439   For example, the request
1440</preamble><artwork type="example">
1441  OPTIONS http://www.example.org:8001 HTTP/1.1
1442</artwork></figure>
1443<figure><preamble>  
1444  would be forwarded by the proxy as
1445</preamble><artwork type="example">
1446  OPTIONS * HTTP/1.1
1447  Host: www.example.org:8001
1448</artwork>
1449<postamble>
1450   after connecting to port 8001 of host "www.example.org".
1451</postamble>
1452</figure>
1453<t>
1454   The request-target is transmitted in the format specified in
1455   <xref target="http.uri"/>. If the request-target is percent-encoded
1456   (<xref target="RFC3986" x:fmt="," x:sec="2.1"/>), the origin server
1457   &MUST; decode the request-target in order to
1458   properly interpret the request. Servers &SHOULD; respond to invalid
1459   request-targets with an appropriate status code.
1460</t>
1461<t>
1462   A transparent proxy &MUST-NOT; rewrite the "path-absolute" part of the
1463   received request-target when forwarding it to the next inbound server,
1464   except as noted above to replace a null path-absolute with "/".
1465</t>
1466<x:note>
1467  <t>
1468    <x:h>Note:</x:h> The "no rewrite" rule prevents the proxy from changing the
1469    meaning of the request when the origin server is improperly using
1470    a non-reserved URI character for a reserved purpose.  Implementors
1471    should be aware that some pre-HTTP/1.1 proxies have been known to
1472    rewrite the request-target.
1473  </t>
1474</x:note>
1475<t>
1476   HTTP does not place a pre-defined limit on the length of a request-target.
1477   A server &MUST; be prepared to receive URIs of unbounded length and
1478   respond with the 414 (URI Too Long) status if the received
1479   request-target would be longer than the server wishes to handle
1480   (see &status-414;).
1481</t>
1482<t>
1483   Various ad-hoc limitations on request-target length are found in practice.
1484   It is &RECOMMENDED; that all HTTP senders and recipients support
1485   request-target lengths of 8000 or more OCTETs.
1486</t>
1487</section>
1488</section>
1489
1490<section title="The Resource Identified by a Request" anchor="the.resource.identified.by.a.request">
1491<t>
1492   The exact resource identified by an Internet request is determined by
1493   examining both the request-target and the Host header field.
1494</t>
1495<t>
1496   An origin server that does not allow resources to differ by the
1497   requested host &MAY; ignore the Host header field value when
1498   determining the resource identified by an HTTP/1.1 request. (But see
1499   <xref target="changes.to.simplify.multi-homed.web.servers.and.conserve.ip.addresses"/>
1500   for other requirements on Host support in HTTP/1.1.)
1501</t>
1502<t>
1503   An origin server that does differentiate resources based on the host
1504   requested (sometimes referred to as virtual hosts or vanity host
1505   names) &MUST; use the following rules for determining the requested
1506   resource on an HTTP/1.1 request:
1507  <list style="numbers">
1508    <t>If request-target is an absolute-URI, the host is part of the
1509     request-target. Any Host header field value in the request &MUST; be
1510     ignored.</t>
1511    <t>If the request-target is not an absolute-URI, and the request includes
1512     a Host header field, the host is determined by the Host header
1513     field value.</t>
1514    <t>If the host as determined by rule 1 or 2 is not a valid host on
1515     the server, the response &MUST; be a 400 (Bad Request) error message.</t>
1516  </list>
1517</t>
1518<t>
1519   Recipients of an HTTP/1.0 request that lacks a Host header field &MAY;
1520   attempt to use heuristics (e.g., examination of the URI path for
1521   something unique to a particular host) in order to determine what
1522   exact resource is being requested.
1523</t>
1524</section>
1525
1526</section>
1527
1528
1529<section title="Response" anchor="response">
1530  <x:anchor-alias value="Response"/>
1531<t>
1532   After receiving and interpreting a request message, a server responds
1533   with an HTTP response message.
1534</t>
1535<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Response"/>
1536  <x:ref>Response</x:ref>      = <x:ref>Status-Line</x:ref>               ; <xref target="status-line"/>
1537                  *(( <x:ref>general-header</x:ref>        ; <xref target="general.header.fields"/>
1538                   / <x:ref>response-header</x:ref>        ; &response-header-fields;
1539                   / <x:ref>entity-header</x:ref> ) <x:ref>CRLF</x:ref> )  ; &entity-header-fields;
1540                  <x:ref>CRLF</x:ref>
1541                  [ <x:ref>message-body</x:ref> ]          ; <xref target="message.body"/>
1542</artwork></figure>
1543
1544<section title="Status-Line" anchor="status-line">
1545  <x:anchor-alias value="Status-Line"/>
1546<t>
1547   The first line of a Response message is the Status-Line, consisting
1548   of the protocol version followed by a numeric status code and its
1549   associated textual phrase, with each element separated by SP
1550   characters. No CR or LF is allowed except in the final CRLF sequence.
1551</t>
1552<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Status-Line"/>
1553  <x:ref>Status-Line</x:ref> = <x:ref>HTTP-Version</x:ref> <x:ref>SP</x:ref> <x:ref>Status-Code</x:ref> <x:ref>SP</x:ref> <x:ref>Reason-Phrase</x:ref> <x:ref>CRLF</x:ref>
1554</artwork></figure>
1555
1556<section title="Status Code and Reason Phrase" anchor="status.code.and.reason.phrase">
1557  <x:anchor-alias value="Reason-Phrase"/>
1558  <x:anchor-alias value="Status-Code"/>
1559<t>
1560   The Status-Code element is a 3-digit integer result code of the
1561   attempt to understand and satisfy the request. These codes are fully
1562   defined in &status-codes;.  The Reason Phrase exists for the sole
1563   purpose of providing a textual description associated with the numeric
1564   status code, out of deference to earlier Internet application protocols
1565   that were more frequently used with interactive text clients.
1566   A client &SHOULD; ignore the content of the Reason Phrase.
1567</t>
1568<t>
1569   The first digit of the Status-Code defines the class of response. The
1570   last two digits do not have any categorization role. There are 5
1571   values for the first digit:
1572  <list style="symbols">
1573    <t>
1574      1xx: Informational - Request received, continuing process
1575    </t>
1576    <t>
1577      2xx: Success - The action was successfully received,
1578        understood, and accepted
1579    </t>
1580    <t>
1581      3xx: Redirection - Further action must be taken in order to
1582        complete the request
1583    </t>
1584    <t>
1585      4xx: Client Error - The request contains bad syntax or cannot
1586        be fulfilled
1587    </t>
1588    <t>
1589      5xx: Server Error - The server failed to fulfill an apparently
1590        valid request
1591    </t>
1592  </list>
1593</t>
1594<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Status-Code"/><iref primary="true" item="Grammar" subitem="extension-code"/><iref primary="true" item="Grammar" subitem="Reason-Phrase"/>
1595  <x:ref>Status-Code</x:ref>    = 3<x:ref>DIGIT</x:ref>
1596  <x:ref>Reason-Phrase</x:ref>  = *( <x:ref>WSP</x:ref> / <x:ref>VCHAR</x:ref> / <x:ref>obs-text</x:ref> )
1597</artwork></figure>
1598</section>
1599</section>
1600
1601</section>
1602
1603
1604<section title="Protocol Parameters" anchor="protocol.parameters">
1605
1606<section title="Date/Time Formats: Full Date" anchor="date.time.formats.full.date">
1607  <x:anchor-alias value="HTTP-date"/>
1608<t>
1609   HTTP applications have historically allowed three different formats
1610   for the representation of date/time stamps:
1611</t>
1612<figure><artwork type="example">
1613  Sun, 06 Nov 1994 08:49:37 GMT  ; RFC 1123
1614  Sunday, 06-Nov-94 08:49:37 GMT ; obsolete RFC 850 format
1615  Sun Nov  6 08:49:37 1994       ; ANSI C's asctime() format
1616</artwork></figure>
1617<t>
1618   The first format is preferred as an Internet standard and represents
1619   a fixed-length subset of that defined by <xref target="RFC1123"/>. The
1620   other formats are described here only for
1621   compatibility with obsolete implementations.
1622   HTTP/1.1 clients and servers that parse the date value &MUST; accept
1623   all three formats (for compatibility with HTTP/1.0), though they &MUST;
1624   only generate the RFC 1123 format for representing HTTP-date values
1625   in header fields. See <xref target="tolerant.applications"/> for further information.
1626</t>
1627<t>
1628   All HTTP date/time stamps &MUST; be represented in Greenwich Mean Time
1629   (GMT), without exception. For the purposes of HTTP, GMT is exactly
1630   equal to UTC (Coordinated Universal Time). This is indicated in the
1631   first two formats by the inclusion of "GMT" as the three-letter
1632   abbreviation for time zone, and &MUST; be assumed when reading the
1633   asctime format. HTTP-date is case sensitive and &MUST-NOT; include
1634   additional whitespace beyond that specifically included as SP in the
1635   grammar.
1636</t>
1637<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="HTTP-date"/>
1638  <x:ref>HTTP-date</x:ref>    = <x:ref>rfc1123-date</x:ref> / <x:ref>obs-date</x:ref>
1639</artwork></figure>
1640<t anchor="preferred.date.format">
1641  <x:anchor-alias value="rfc1123-date"/>
1642  <x:anchor-alias value="time-of-day"/>
1643  <x:anchor-alias value="hour"/>
1644  <x:anchor-alias value="minute"/>
1645  <x:anchor-alias value="second"/>
1646  <x:anchor-alias value="day-name"/>
1647  <x:anchor-alias value="day"/>
1648  <x:anchor-alias value="month"/>
1649  <x:anchor-alias value="year"/>
1650  <x:anchor-alias value="GMT"/>
1651  Preferred format:
1652</t>
1653<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="rfc1123-date"/><iref primary="true" item="Grammar" subitem="date1"/><iref primary="true" item="Grammar" subitem="time-of-day"/><iref primary="true" item="Grammar" subitem="hour"/><iref primary="true" item="Grammar" subitem="minute"/><iref primary="true" item="Grammar" subitem="second"/><iref primary="true" item="Grammar" subitem="day-name"/><iref primary="true" item="Grammar" subitem="day-name-l"/><iref primary="true" item="Grammar" subitem="day"/><iref primary="true" item="Grammar" subitem="month"/><iref primary="true" item="Grammar" subitem="year"/><iref primary="true" item="Grammar" subitem="GMT"/>
1654  <x:ref>rfc1123-date</x:ref> = <x:ref>day-name</x:ref> "," <x:ref>SP</x:ref> date1 <x:ref>SP</x:ref> <x:ref>time-of-day</x:ref> <x:ref>SP</x:ref> <x:ref>GMT</x:ref>
1655
1656  <x:ref>day-name</x:ref>     = <x:abnf-char-sequence>"Mon"</x:abnf-char-sequence> ; "Mon", case-sensitive
1657               / <x:abnf-char-sequence>"Tue"</x:abnf-char-sequence> ; "Tue", case-sensitive
1658               / <x:abnf-char-sequence>"Wed"</x:abnf-char-sequence> ; "Wed", case-sensitive
1659               / <x:abnf-char-sequence>"Thu"</x:abnf-char-sequence> ; "Thu", case-sensitive
1660               / <x:abnf-char-sequence>"Fri"</x:abnf-char-sequence> ; "Fri", case-sensitive
1661               / <x:abnf-char-sequence>"Sat"</x:abnf-char-sequence> ; "Sat", case-sensitive
1662               / <x:abnf-char-sequence>"Sun"</x:abnf-char-sequence> ; "Sun", case-sensitive
1663               
1664  <x:ref>date1</x:ref>        = <x:ref>day</x:ref> <x:ref>SP</x:ref> <x:ref>month</x:ref> <x:ref>SP</x:ref> <x:ref>year</x:ref>
1665               ; e.g., 02 Jun 1982
1666
1667  <x:ref>day</x:ref>          = 2<x:ref>DIGIT</x:ref>
1668  <x:ref>month</x:ref>        = <x:abnf-char-sequence>"Jan"</x:abnf-char-sequence> ; "Jan", case-sensitive
1669               / <x:abnf-char-sequence>"Feb"</x:abnf-char-sequence> ; "Feb", case-sensitive
1670               / <x:abnf-char-sequence>"Mar"</x:abnf-char-sequence> ; "Mar", case-sensitive
1671               / <x:abnf-char-sequence>"Apr"</x:abnf-char-sequence> ; "Apr", case-sensitive
1672               / <x:abnf-char-sequence>"May"</x:abnf-char-sequence> ; "May", case-sensitive
1673               / <x:abnf-char-sequence>"Jun"</x:abnf-char-sequence> ; "Jun", case-sensitive
1674               / <x:abnf-char-sequence>"Jul"</x:abnf-char-sequence> ; "Jul", case-sensitive
1675               / <x:abnf-char-sequence>"Aug"</x:abnf-char-sequence> ; "Aug", case-sensitive
1676               / <x:abnf-char-sequence>"Sep"</x:abnf-char-sequence> ; "Sep", case-sensitive
1677               / <x:abnf-char-sequence>"Oct"</x:abnf-char-sequence> ; "Oct", case-sensitive
1678               / <x:abnf-char-sequence>"Nov"</x:abnf-char-sequence> ; "Nov", case-sensitive
1679               / <x:abnf-char-sequence>"Dec"</x:abnf-char-sequence> ; "Dec", case-sensitive
1680  <x:ref>year</x:ref>         = 4<x:ref>DIGIT</x:ref>
1681
1682  <x:ref>GMT</x:ref>   = <x:abnf-char-sequence>"GMT"</x:abnf-char-sequence> ; "GMT", case-sensitive
1683
1684  <x:ref>time-of-day</x:ref>  = <x:ref>hour</x:ref> ":" <x:ref>minute</x:ref> ":" <x:ref>second</x:ref>
1685                 ; 00:00:00 - 23:59:59
1686                 
1687  <x:ref>hour</x:ref>         = 2<x:ref>DIGIT</x:ref>               
1688  <x:ref>minute</x:ref>       = 2<x:ref>DIGIT</x:ref>               
1689  <x:ref>second</x:ref>       = 2<x:ref>DIGIT</x:ref>               
1690</artwork></figure>
1691<t>
1692  The semantics of <x:ref>day-name</x:ref>, <x:ref>day</x:ref>,
1693  <x:ref>month</x:ref>, <x:ref>year</x:ref>, and <x:ref>time-of-day</x:ref> are the
1694  same as those defined for the RFC 5322 constructs
1695  with the corresponding name (<xref target="RFC5322" x:fmt="," x:sec="3.3"/>).
1696</t>
1697<t anchor="obsolete.date.formats">
1698  <x:anchor-alias value="obs-date"/>
1699  <x:anchor-alias value="rfc850-date"/>
1700  <x:anchor-alias value="asctime-date"/>
1701  <x:anchor-alias value="date1"/>
1702  <x:anchor-alias value="date2"/>
1703  <x:anchor-alias value="date3"/>
1704  <x:anchor-alias value="rfc1123-date"/>
1705  <x:anchor-alias value="day-name-l"/>
1706  Obsolete formats:
1707</t>
1708<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="obs-date"/>
1709  <x:ref>obs-date</x:ref>     = <x:ref>rfc850-date</x:ref> / <x:ref>asctime-date</x:ref>
1710</artwork></figure>
1711<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="rfc850-date"/>
1712  <x:ref>rfc850-date</x:ref>  = <x:ref>day-name-l</x:ref> "," <x:ref>SP</x:ref> <x:ref>date2</x:ref> <x:ref>SP</x:ref> <x:ref>time-of-day</x:ref> <x:ref>SP</x:ref> <x:ref>GMT</x:ref>
1713  <x:ref>date2</x:ref>        = <x:ref>day</x:ref> "-" <x:ref>month</x:ref> "-" 2<x:ref>DIGIT</x:ref>
1714                 ; day-month-year (e.g., 02-Jun-82)
1715
1716  <x:ref>day-name-l</x:ref>   = <x:abnf-char-sequence>"Monday"</x:abnf-char-sequence> ; "Monday", case-sensitive
1717         / <x:abnf-char-sequence>"Tuesday"</x:abnf-char-sequence> ; "Tuesday", case-sensitive
1718         / <x:abnf-char-sequence>"Wednesday"</x:abnf-char-sequence> ; "Wednesday", case-sensitive
1719         / <x:abnf-char-sequence>"Thursday"</x:abnf-char-sequence> ; "Thursday", case-sensitive
1720         / <x:abnf-char-sequence>"Friday"</x:abnf-char-sequence> ; "Friday", case-sensitive
1721         / <x:abnf-char-sequence>"Saturday"</x:abnf-char-sequence> ; "Saturday", case-sensitive
1722         / <x:abnf-char-sequence>"Sunday"</x:abnf-char-sequence> ; "Sunday", case-sensitive
1723</artwork></figure>
1724<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="asctime-date"/>
1725  <x:ref>asctime-date</x:ref> = <x:ref>day-name</x:ref> <x:ref>SP</x:ref> <x:ref>date3</x:ref> <x:ref>SP</x:ref> <x:ref>time-of-day</x:ref> <x:ref>SP</x:ref> <x:ref>year</x:ref>
1726  <x:ref>date3</x:ref>        = <x:ref>month</x:ref> <x:ref>SP</x:ref> ( 2<x:ref>DIGIT</x:ref> / ( <x:ref>SP</x:ref> 1<x:ref>DIGIT</x:ref> ))
1727                 ; month day (e.g., Jun  2)
1728</artwork></figure>
1729<x:note>
1730  <t>
1731    <x:h>Note:</x:h> Recipients of date values are encouraged to be robust in
1732    accepting date values that may have been sent by non-HTTP
1733    applications, as is sometimes the case when retrieving or posting
1734    messages via proxies/gateways to SMTP or NNTP.
1735  </t>
1736</x:note>
1737<x:note>
1738  <t>
1739    <x:h>Note:</x:h> HTTP requirements for the date/time stamp format apply only
1740    to their usage within the protocol stream. Clients and servers are
1741    not required to use these formats for user presentation, request
1742    logging, etc.
1743  </t>
1744</x:note>
1745</section>
1746
1747<section title="Transfer Codings" anchor="transfer.codings">
1748  <x:anchor-alias value="transfer-coding"/>
1749  <x:anchor-alias value="transfer-extension"/>
1750<t>
1751   Transfer-coding values are used to indicate an encoding
1752   transformation that has been, can be, or may need to be applied to an
1753   entity-body in order to ensure "safe transport" through the network.
1754   This differs from a content coding in that the transfer-coding is a
1755   property of the message, not of the original entity.
1756</t>
1757<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="transfer-coding"/><iref primary="true" item="Grammar" subitem="transfer-extension"/>
1758  <x:ref>transfer-coding</x:ref>         = "chunked" / <x:ref>transfer-extension</x:ref>
1759  <x:ref>transfer-extension</x:ref>      = <x:ref>token</x:ref> *( <x:ref>OWS</x:ref> ";" <x:ref>OWS</x:ref> <x:ref>transfer-parameter</x:ref> )
1760</artwork></figure>
1761<t anchor="rule.parameter">
1762  <x:anchor-alias value="attribute"/>
1763  <x:anchor-alias value="transfer-parameter"/>
1764  <x:anchor-alias value="value"/>
1765   Parameters are in  the form of attribute/value pairs.
1766</t>
1767<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="transfer-parameter"/><iref primary="true" item="Grammar" subitem="attribute"/><iref primary="true" item="Grammar" subitem="value"/><iref primary="true" item="Grammar" subitem="date2"/><iref primary="true" item="Grammar" subitem="date3"/>
1768  <x:ref>transfer-parameter</x:ref>      = <x:ref>attribute</x:ref> <x:ref>BWS</x:ref> "=" <x:ref>BWS</x:ref> <x:ref>value</x:ref>
1769  <x:ref>attribute</x:ref>               = <x:ref>token</x:ref>
1770  <x:ref>value</x:ref>                   = <x:ref>token</x:ref> / <x:ref>quoted-string</x:ref>
1771</artwork></figure>
1772<t>
1773   All transfer-coding values are case-insensitive. HTTP/1.1 uses
1774   transfer-coding values in the TE header field (<xref target="header.te"/>) and in
1775   the Transfer-Encoding header field (<xref target="header.transfer-encoding"/>).
1776</t>
1777<t>
1778   Whenever a transfer-coding is applied to a message-body, the set of
1779   transfer-codings &MUST; include "chunked", unless the message indicates it
1780   is terminated by closing the connection. When the "chunked" transfer-coding
1781   is used, it &MUST; be the last transfer-coding applied to the
1782   message-body. The "chunked" transfer-coding &MUST-NOT; be applied more
1783   than once to a message-body. These rules allow the recipient to
1784   determine the transfer-length of the message (<xref target="message.length"/>).
1785</t>
1786<t>
1787   Transfer-codings are analogous to the Content-Transfer-Encoding values of
1788   MIME, which were designed to enable safe transport of binary data over a
1789   7-bit transport service (<xref target="RFC2045" x:fmt="," x:sec="6"/>).
1790   However, safe transport
1791   has a different focus for an 8bit-clean transfer protocol. In HTTP,
1792   the only unsafe characteristic of message-bodies is the difficulty in
1793   determining the exact body length (<xref target="message.length"/>), or the desire to
1794   encrypt data over a shared transport.
1795</t>
1796<t>
1797   A server which receives an entity-body with a transfer-coding it does
1798   not understand &SHOULD; return 501 (Not Implemented), and close the
1799   connection. A server &MUST-NOT; send transfer-codings to an HTTP/1.0
1800   client.
1801</t>
1802
1803<section title="Chunked Transfer Coding" anchor="chunked.transfer.encoding">
1804  <x:anchor-alias value="chunk"/>
1805  <x:anchor-alias value="Chunked-Body"/>
1806  <x:anchor-alias value="chunk-data"/>
1807  <x:anchor-alias value="chunk-ext"/>
1808  <x:anchor-alias value="chunk-ext-name"/>
1809  <x:anchor-alias value="chunk-ext-val"/>
1810  <x:anchor-alias value="chunk-size"/>
1811  <x:anchor-alias value="last-chunk"/>
1812  <x:anchor-alias value="trailer-part"/>
1813<t>
1814   The chunked encoding modifies the body of a message in order to
1815   transfer it as a series of chunks, each with its own size indicator,
1816   followed by an &OPTIONAL; trailer containing entity-header fields. This
1817   allows dynamically produced content to be transferred along with the
1818   information necessary for the recipient to verify that it has
1819   received the full message.
1820</t>
1821<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Chunked-Body"/><iref primary="true" item="Grammar" subitem="chunk"/><iref primary="true" item="Grammar" subitem="chunk-size"/><iref primary="true" item="Grammar" subitem="last-chunk"/><iref primary="true" item="Grammar" subitem="chunk-ext"/><iref primary="true" item="Grammar" subitem="chunk-ext-name"/><iref primary="true" item="Grammar" subitem="chunk-ext-val"/><iref primary="true" item="Grammar" subitem="chunk-data"/><iref primary="true" item="Grammar" subitem="trailer-part"/>
1822  <x:ref>Chunked-Body</x:ref>   = *<x:ref>chunk</x:ref>
1823                   <x:ref>last-chunk</x:ref>
1824                   <x:ref>trailer-part</x:ref>
1825                   <x:ref>CRLF</x:ref>
1826 
1827  <x:ref>chunk</x:ref>          = <x:ref>chunk-size</x:ref> *WSP [ <x:ref>chunk-ext</x:ref> ] <x:ref>CRLF</x:ref>
1828                   <x:ref>chunk-data</x:ref> <x:ref>CRLF</x:ref>
1829  <x:ref>chunk-size</x:ref>     = 1*<x:ref>HEXDIG</x:ref>
1830  <x:ref>last-chunk</x:ref>     = 1*("0") *WSP [ <x:ref>chunk-ext</x:ref> ] <x:ref>CRLF</x:ref>
1831 
1832  <x:ref>chunk-ext</x:ref>      = *( ";" *WSP <x:ref>chunk-ext-name</x:ref>
1833                      [ "=" <x:ref>chunk-ext-val</x:ref> ] *WSP )
1834  <x:ref>chunk-ext-name</x:ref> = <x:ref>token</x:ref>
1835  <x:ref>chunk-ext-val</x:ref>  = <x:ref>token</x:ref> / <x:ref>quoted-string</x:ref>
1836  <x:ref>chunk-data</x:ref>     = 1*<x:ref>OCTET</x:ref> ; a sequence of chunk-size octets
1837  <x:ref>trailer-part</x:ref>   = *( <x:ref>entity-header</x:ref> <x:ref>CRLF</x:ref> )
1838</artwork></figure>
1839<t>
1840   The chunk-size field is a string of hex digits indicating the size of
1841   the chunk-data in octets. The chunked encoding is ended by any chunk whose size is
1842   zero, followed by the trailer, which is terminated by an empty line.
1843</t>
1844<t>
1845   The trailer allows the sender to include additional HTTP header
1846   fields at the end of the message. The Trailer header field can be
1847   used to indicate which header fields are included in a trailer (see
1848   <xref target="header.trailer"/>).
1849</t>
1850<t>
1851   A server using chunked transfer-coding in a response &MUST-NOT; use the
1852   trailer for any header fields unless at least one of the following is
1853   true:
1854  <list style="numbers">
1855    <t>the request included a TE header field that indicates "trailers" is
1856     acceptable in the transfer-coding of the  response, as described in
1857     <xref target="header.te"/>; or,</t>
1858
1859    <t>the server is the origin server for the response, the trailer
1860     fields consist entirely of optional metadata, and the recipient
1861     could use the message (in a manner acceptable to the origin server)
1862     without receiving this metadata.  In other words, the origin server
1863     is willing to accept the possibility that the trailer fields might
1864     be silently discarded along the path to the client.</t>
1865  </list>
1866</t>
1867<t>
1868   This requirement prevents an interoperability failure when the
1869   message is being received by an HTTP/1.1 (or later) proxy and
1870   forwarded to an HTTP/1.0 recipient. It avoids a situation where
1871   compliance with the protocol would have necessitated a possibly
1872   infinite buffer on the proxy.
1873</t>
1874<t>
1875   A process for decoding the "chunked" transfer-coding
1876   can be represented in pseudo-code as:
1877</t>
1878<figure><artwork type="code">
1879  length := 0
1880  read chunk-size, chunk-ext (if any) and CRLF
1881  while (chunk-size &gt; 0) {
1882     read chunk-data and CRLF
1883     append chunk-data to entity-body
1884     length := length + chunk-size
1885     read chunk-size and CRLF
1886  }
1887  read entity-header
1888  while (entity-header not empty) {
1889     append entity-header to existing header fields
1890     read entity-header
1891  }
1892  Content-Length := length
1893  Remove "chunked" from Transfer-Encoding
1894</artwork></figure>
1895<t>
1896   All HTTP/1.1 applications &MUST; be able to receive and decode the
1897   "chunked" transfer-coding, and &MUST; ignore chunk-ext extensions
1898   they do not understand.
1899</t>
1900</section>
1901
1902<section title="Transfer Coding Registry" anchor="transfer.coding.registry">
1903<t>
1904   The HTTP Transfer Coding Registry defines the name space for the transfer
1905   coding names.
1906</t>
1907<t>
1908   Registrations &MUST; include the following fields:
1909   <list style="symbols">
1910     <t>Name</t>
1911     <t>Description</t>
1912     <t>Pointer to specification text</t>
1913   </list>
1914</t>
1915<t>
1916   Values to be added to this name space require expert review and a specification
1917   (see "Expert Review" and "Specification Required" in
1918   <xref target="RFC5226" x:fmt="of" x:sec="4.1"/>), and &MUST;
1919   conform to the purpose of transfer coding defined in this section.
1920</t>
1921<t>
1922   The registry itself is maintained at
1923   <eref target="http://www.iana.org/assignments/http-parameters"/>.
1924</t>
1925</section>
1926</section>
1927
1928<section title="Product Tokens" anchor="product.tokens">
1929  <x:anchor-alias value="product"/>
1930  <x:anchor-alias value="product-version"/>
1931<t>
1932   Product tokens are used to allow communicating applications to
1933   identify themselves by software name and version. Most fields using
1934   product tokens also allow sub-products which form a significant part
1935   of the application to be listed, separated by whitespace. By
1936   convention, the products are listed in order of their significance
1937   for identifying the application.
1938</t>
1939<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="product"/><iref primary="true" item="Grammar" subitem="product-version"/>
1940  <x:ref>product</x:ref>         = <x:ref>token</x:ref> ["/" <x:ref>product-version</x:ref>]
1941  <x:ref>product-version</x:ref> = <x:ref>token</x:ref>
1942</artwork></figure>
1943<t>
1944   Examples:
1945</t>
1946<figure><artwork type="example">
1947  User-Agent: CERN-LineMode/2.15 libwww/2.17b3
1948  Server: Apache/0.8.4
1949</artwork></figure>
1950<t>
1951   Product tokens &SHOULD; be short and to the point. They &MUST-NOT; be
1952   used for advertising or other non-essential information. Although any
1953   token character &MAY; appear in a product-version, this token &SHOULD;
1954   only be used for a version identifier (i.e., successive versions of
1955   the same product &SHOULD; only differ in the product-version portion of
1956   the product value).
1957</t>
1958</section>
1959
1960<section title="Quality Values" anchor="quality.values">
1961  <x:anchor-alias value="qvalue"/>
1962<t>
1963   Both transfer codings (TE request header, <xref target="header.te"/>)
1964   and content negotiation (&content.negotiation;) use short "floating point"
1965   numbers to indicate the relative importance ("weight") of various
1966   negotiable parameters.  A weight is normalized to a real number in
1967   the range 0 through 1, where 0 is the minimum and 1 the maximum
1968   value. If a parameter has a quality value of 0, then content with
1969   this parameter is `not acceptable' for the client. HTTP/1.1
1970   applications &MUST-NOT; generate more than three digits after the
1971   decimal point. User configuration of these values &SHOULD; also be
1972   limited in this fashion.
1973</t>
1974<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="qvalue"/>
1975  <x:ref>qvalue</x:ref>         = ( "0" [ "." 0*3<x:ref>DIGIT</x:ref> ] )
1976                 / ( "1" [ "." 0*3("0") ] )
1977</artwork></figure>
1978<x:note>
1979  <t>
1980     <x:h>Note:</x:h> "Quality values" is a misnomer, since these values merely represent
1981     relative degradation in desired quality.
1982  </t>
1983</x:note>
1984</section>
1985
1986</section>
1987
1988<section title="Connections" anchor="connections">
1989
1990<section title="Persistent Connections" anchor="persistent.connections">
1991
1992<section title="Purpose" anchor="persistent.purpose">
1993<t>
1994   Prior to persistent connections, a separate TCP connection was
1995   established to fetch each URL, increasing the load on HTTP servers
1996   and causing congestion on the Internet. The use of inline images and
1997   other associated data often require a client to make multiple
1998   requests of the same server in a short amount of time. Analysis of
1999   these performance problems and results from a prototype
2000   implementation are available <xref target="Pad1995"/> <xref target="Spe"/>. Implementation experience and
2001   measurements of actual HTTP/1.1 implementations show good
2002   results <xref target="Nie1997"/>. Alternatives have also been explored, for example,
2003   T/TCP <xref target="Tou1998"/>.
2004</t>
2005<t>
2006   Persistent HTTP connections have a number of advantages:
2007  <list style="symbols">
2008      <t>
2009        By opening and closing fewer TCP connections, CPU time is saved
2010        in routers and hosts (clients, servers, proxies, gateways,
2011        tunnels, or caches), and memory used for TCP protocol control
2012        blocks can be saved in hosts.
2013      </t>
2014      <t>
2015        HTTP requests and responses can be pipelined on a connection.
2016        Pipelining allows a client to make multiple requests without
2017        waiting for each response, allowing a single TCP connection to
2018        be used much more efficiently, with much lower elapsed time.
2019      </t>
2020      <t>
2021        Network congestion is reduced by reducing the number of packets
2022        caused by TCP opens, and by allowing TCP sufficient time to
2023        determine the congestion state of the network.
2024      </t>
2025      <t>
2026        Latency on subsequent requests is reduced since there is no time
2027        spent in TCP's connection opening handshake.
2028      </t>
2029      <t>
2030        HTTP can evolve more gracefully, since errors can be reported
2031        without the penalty of closing the TCP connection. Clients using
2032        future versions of HTTP might optimistically try a new feature,
2033        but if communicating with an older server, retry with old
2034        semantics after an error is reported.
2035      </t>
2036    </list>
2037</t>
2038<t>
2039   HTTP implementations &SHOULD; implement persistent connections.
2040</t>
2041</section>
2042
2043<section title="Overall Operation" anchor="persistent.overall">
2044<t>
2045   A significant difference between HTTP/1.1 and earlier versions of
2046   HTTP is that persistent connections are the default behavior of any
2047   HTTP connection. That is, unless otherwise indicated, the client
2048   &SHOULD; assume that the server will maintain a persistent connection,
2049   even after error responses from the server.
2050</t>
2051<t>
2052   Persistent connections provide a mechanism by which a client and a
2053   server can signal the close of a TCP connection. This signaling takes
2054   place using the Connection header field (<xref target="header.connection"/>). Once a close
2055   has been signaled, the client &MUST-NOT; send any more requests on that
2056   connection.
2057</t>
2058
2059<section title="Negotiation" anchor="persistent.negotiation">
2060<t>
2061   An HTTP/1.1 server &MAY; assume that a HTTP/1.1 client intends to
2062   maintain a persistent connection unless a Connection header including
2063   the connection-token "close" was sent in the request. If the server
2064   chooses to close the connection immediately after sending the
2065   response, it &SHOULD; send a Connection header including the
2066   connection-token close.
2067</t>
2068<t>
2069   An HTTP/1.1 client &MAY; expect a connection to remain open, but would
2070   decide to keep it open based on whether the response from a server
2071   contains a Connection header with the connection-token close. In case
2072   the client does not want to maintain a connection for more than that
2073   request, it &SHOULD; send a Connection header including the
2074   connection-token close.
2075</t>
2076<t>
2077   If either the client or the server sends the close token in the
2078   Connection header, that request becomes the last one for the
2079   connection.
2080</t>
2081<t>
2082   Clients and servers &SHOULD-NOT;  assume that a persistent connection is
2083   maintained for HTTP versions less than 1.1 unless it is explicitly
2084   signaled. See <xref target="compatibility.with.http.1.0.persistent.connections"/> for more information on backward
2085   compatibility with HTTP/1.0 clients.
2086</t>
2087<t>
2088   In order to remain persistent, all messages on the connection &MUST;
2089   have a self-defined message length (i.e., one not defined by closure
2090   of the connection), as described in <xref target="message.length"/>.
2091</t>
2092</section>
2093
2094<section title="Pipelining" anchor="pipelining">
2095<t>
2096   A client that supports persistent connections &MAY; "pipeline" its
2097   requests (i.e., send multiple requests without waiting for each
2098   response). A server &MUST; send its responses to those requests in the
2099   same order that the requests were received.
2100</t>
2101<t>
2102   Clients which assume persistent connections and pipeline immediately
2103   after connection establishment &SHOULD; be prepared to retry their
2104   connection if the first pipelined attempt fails. If a client does
2105   such a retry, it &MUST-NOT; pipeline before it knows the connection is
2106   persistent. Clients &MUST; also be prepared to resend their requests if
2107   the server closes the connection before sending all of the
2108   corresponding responses.
2109</t>
2110<t>
2111   Clients &SHOULD-NOT;  pipeline requests using non-idempotent methods or
2112   non-idempotent sequences of methods (see &idempotent-methods;). Otherwise, a
2113   premature termination of the transport connection could lead to
2114   indeterminate results. A client wishing to send a non-idempotent
2115   request &SHOULD; wait to send that request until it has received the
2116   response status for the previous request.
2117</t>
2118</section>
2119</section>
2120
2121<section title="Proxy Servers" anchor="persistent.proxy">
2122<t>
2123   It is especially important that proxies correctly implement the
2124   properties of the Connection header field as specified in <xref target="header.connection"/>.
2125</t>
2126<t>
2127   The proxy server &MUST; signal persistent connections separately with
2128   its clients and the origin servers (or other proxy servers) that it
2129   connects to. Each persistent connection applies to only one transport
2130   link.
2131</t>
2132<t>
2133   A proxy server &MUST-NOT; establish a HTTP/1.1 persistent connection
2134   with an HTTP/1.0 client (but see <xref x:sec="19.7.1" x:fmt="of" target="RFC2068"/>
2135   for information and discussion of the problems with the Keep-Alive header
2136   implemented by many HTTP/1.0 clients).
2137</t>
2138</section>
2139
2140<section title="Practical Considerations" anchor="persistent.practical">
2141<t>
2142   Servers will usually have some time-out value beyond which they will
2143   no longer maintain an inactive connection. Proxy servers might make
2144   this a higher value since it is likely that the client will be making
2145   more connections through the same server. The use of persistent
2146   connections places no requirements on the length (or existence) of
2147   this time-out for either the client or the server.
2148</t>
2149<t>
2150   When a client or server wishes to time-out it &SHOULD; issue a graceful
2151   close on the transport connection. Clients and servers &SHOULD; both
2152   constantly watch for the other side of the transport close, and
2153   respond to it as appropriate. If a client or server does not detect
2154   the other side's close promptly it could cause unnecessary resource
2155   drain on the network.
2156</t>
2157<t>
2158   A client, server, or proxy &MAY; close the transport connection at any
2159   time. For example, a client might have started to send a new request
2160   at the same time that the server has decided to close the "idle"
2161   connection. From the server's point of view, the connection is being
2162   closed while it was idle, but from the client's point of view, a
2163   request is in progress.
2164</t>
2165<t>
2166   This means that clients, servers, and proxies &MUST; be able to recover
2167   from asynchronous close events. Client software &SHOULD; reopen the
2168   transport connection and retransmit the aborted sequence of requests
2169   without user interaction so long as the request sequence is
2170   idempotent (see &idempotent-methods;). Non-idempotent methods or sequences
2171   &MUST-NOT; be automatically retried, although user agents &MAY; offer a
2172   human operator the choice of retrying the request(s). Confirmation by
2173   user-agent software with semantic understanding of the application
2174   &MAY; substitute for user confirmation. The automatic retry &SHOULD-NOT;
2175   be repeated if the second sequence of requests fails.
2176</t>
2177<t>
2178   Servers &SHOULD; always respond to at least one request per connection,
2179   if at all possible. Servers &SHOULD-NOT;  close a connection in the
2180   middle of transmitting a response, unless a network or client failure
2181   is suspected.
2182</t>
2183<t>
2184   Clients that use persistent connections &SHOULD; limit the number of
2185   simultaneous connections that they maintain to a given server. A
2186   single-user client &SHOULD-NOT; maintain more than 2 connections with
2187   any server or proxy. A proxy &SHOULD; use up to 2*N connections to
2188   another server or proxy, where N is the number of simultaneously
2189   active users. These guidelines are intended to improve HTTP response
2190   times and avoid congestion.
2191</t>
2192</section>
2193</section>
2194
2195<section title="Message Transmission Requirements" anchor="message.transmission.requirements">
2196
2197<section title="Persistent Connections and Flow Control" anchor="persistent.flow">
2198<t>
2199   HTTP/1.1 servers &SHOULD; maintain persistent connections and use TCP's
2200   flow control mechanisms to resolve temporary overloads, rather than
2201   terminating connections with the expectation that clients will retry.
2202   The latter technique can exacerbate network congestion.
2203</t>
2204</section>
2205
2206<section title="Monitoring Connections for Error Status Messages" anchor="persistent.monitor">
2207<t>
2208   An HTTP/1.1 (or later) client sending a message-body &SHOULD; monitor
2209   the network connection for an error status while it is transmitting
2210   the request. If the client sees an error status, it &SHOULD;
2211   immediately cease transmitting the body. If the body is being sent
2212   using a "chunked" encoding (<xref target="transfer.codings"/>), a zero length chunk and
2213   empty trailer &MAY; be used to prematurely mark the end of the message.
2214   If the body was preceded by a Content-Length header, the client &MUST;
2215   close the connection.
2216</t>
2217</section>
2218
2219<section title="Use of the 100 (Continue) Status" anchor="use.of.the.100.status">
2220<t>
2221   The purpose of the 100 (Continue) status (see &status-100;) is to
2222   allow a client that is sending a request message with a request body
2223   to determine if the origin server is willing to accept the request
2224   (based on the request headers) before the client sends the request
2225   body. In some cases, it might either be inappropriate or highly
2226   inefficient for the client to send the body if the server will reject
2227   the message without looking at the body.
2228</t>
2229<t>
2230   Requirements for HTTP/1.1 clients:
2231  <list style="symbols">
2232    <t>
2233        If a client will wait for a 100 (Continue) response before
2234        sending the request body, it &MUST; send an Expect request-header
2235        field (&header-expect;) with the "100-continue" expectation.
2236    </t>
2237    <t>
2238        A client &MUST-NOT; send an Expect request-header field (&header-expect;)
2239        with the "100-continue" expectation if it does not intend
2240        to send a request body.
2241    </t>
2242  </list>
2243</t>
2244<t>
2245   Because of the presence of older implementations, the protocol allows
2246   ambiguous situations in which a client may send "Expect: 100-continue"
2247   without receiving either a 417 (Expectation Failed) status
2248   or a 100 (Continue) status. Therefore, when a client sends this
2249   header field to an origin server (possibly via a proxy) from which it
2250   has never seen a 100 (Continue) status, the client &SHOULD-NOT;  wait
2251   for an indefinite period before sending the request body.
2252</t>
2253<t>
2254   Requirements for HTTP/1.1 origin servers:
2255  <list style="symbols">
2256    <t> Upon receiving a request which includes an Expect request-header
2257        field with the "100-continue" expectation, an origin server &MUST;
2258        either respond with 100 (Continue) status and continue to read
2259        from the input stream, or respond with a final status code. The
2260        origin server &MUST-NOT; wait for the request body before sending
2261        the 100 (Continue) response. If it responds with a final status
2262        code, it &MAY; close the transport connection or it &MAY; continue
2263        to read and discard the rest of the request.  It &MUST-NOT;
2264        perform the requested method if it returns a final status code.
2265    </t>
2266    <t> An origin server &SHOULD-NOT;  send a 100 (Continue) response if
2267        the request message does not include an Expect request-header
2268        field with the "100-continue" expectation, and &MUST-NOT; send a
2269        100 (Continue) response if such a request comes from an HTTP/1.0
2270        (or earlier) client. There is an exception to this rule: for
2271        compatibility with <xref target="RFC2068"/>, a server &MAY; send a 100 (Continue)
2272        status in response to an HTTP/1.1 PUT or POST request that does
2273        not include an Expect request-header field with the "100-continue"
2274        expectation. This exception, the purpose of which is
2275        to minimize any client processing delays associated with an
2276        undeclared wait for 100 (Continue) status, applies only to
2277        HTTP/1.1 requests, and not to requests with any other HTTP-version
2278        value.
2279    </t>
2280    <t> An origin server &MAY; omit a 100 (Continue) response if it has
2281        already received some or all of the request body for the
2282        corresponding request.
2283    </t>
2284    <t> An origin server that sends a 100 (Continue) response &MUST;
2285    ultimately send a final status code, once the request body is
2286        received and processed, unless it terminates the transport
2287        connection prematurely.
2288    </t>
2289    <t> If an origin server receives a request that does not include an
2290        Expect request-header field with the "100-continue" expectation,
2291        the request includes a request body, and the server responds
2292        with a final status code before reading the entire request body
2293        from the transport connection, then the server &SHOULD-NOT;  close
2294        the transport connection until it has read the entire request,
2295        or until the client closes the connection. Otherwise, the client
2296        might not reliably receive the response message. However, this
2297        requirement is not be construed as preventing a server from
2298        defending itself against denial-of-service attacks, or from
2299        badly broken client implementations.
2300      </t>
2301    </list>
2302</t>
2303<t>
2304   Requirements for HTTP/1.1 proxies:
2305  <list style="symbols">
2306    <t> If a proxy receives a request that includes an Expect request-header
2307        field with the "100-continue" expectation, and the proxy
2308        either knows that the next-hop server complies with HTTP/1.1 or
2309        higher, or does not know the HTTP version of the next-hop
2310        server, it &MUST; forward the request, including the Expect header
2311        field.
2312    </t>
2313    <t> If the proxy knows that the version of the next-hop server is
2314        HTTP/1.0 or lower, it &MUST-NOT; forward the request, and it &MUST;
2315        respond with a 417 (Expectation Failed) status.
2316    </t>
2317    <t> Proxies &SHOULD; maintain a cache recording the HTTP version
2318        numbers received from recently-referenced next-hop servers.
2319    </t>
2320    <t> A proxy &MUST-NOT; forward a 100 (Continue) response if the
2321        request message was received from an HTTP/1.0 (or earlier)
2322        client and did not include an Expect request-header field with
2323        the "100-continue" expectation. This requirement overrides the
2324        general rule for forwarding of 1xx responses (see &status-1xx;).
2325    </t>
2326  </list>
2327</t>
2328</section>
2329
2330<section title="Client Behavior if Server Prematurely Closes Connection" anchor="connection.premature">
2331<t>
2332   If an HTTP/1.1 client sends a request which includes a request body,
2333   but which does not include an Expect request-header field with the
2334   "100-continue" expectation, and if the client is not directly
2335   connected to an HTTP/1.1 origin server, and if the client sees the
2336   connection close before receiving any status from the server, the
2337   client &SHOULD; retry the request.  If the client does retry this
2338   request, it &MAY; use the following "binary exponential backoff"
2339   algorithm to be assured of obtaining a reliable response:
2340  <list style="numbers">
2341    <t>
2342      Initiate a new connection to the server
2343    </t>
2344    <t>
2345      Transmit the request-headers
2346    </t>
2347    <t>
2348      Initialize a variable R to the estimated round-trip time to the
2349         server (e.g., based on the time it took to establish the
2350         connection), or to a constant value of 5 seconds if the round-trip
2351         time is not available.
2352    </t>
2353    <t>
2354       Compute T = R * (2**N), where N is the number of previous
2355         retries of this request.
2356    </t>
2357    <t>
2358       Wait either for an error response from the server, or for T
2359         seconds (whichever comes first)
2360    </t>
2361    <t>
2362       If no error response is received, after T seconds transmit the
2363         body of the request.
2364    </t>
2365    <t>
2366       If client sees that the connection is closed prematurely,
2367         repeat from step 1 until the request is accepted, an error
2368         response is received, or the user becomes impatient and
2369         terminates the retry process.
2370    </t>
2371  </list>
2372</t>
2373<t>
2374   If at any point an error status is received, the client
2375  <list style="symbols">
2376      <t>&SHOULD-NOT;  continue and</t>
2377
2378      <t>&SHOULD; close the connection if it has not completed sending the
2379        request message.</t>
2380    </list>
2381</t>
2382</section>
2383</section>
2384</section>
2385
2386
2387<section title="Miscellaneous notes that may disappear" anchor="misc">
2388<section title="Scheme aliases considered harmful" anchor="scheme.aliases">
2389<t>
2390   <cref>TBS: describe why aliases like webcal are harmful.</cref>
2391</t>
2392</section>
2393</section>
2394
2395<section title="Use of HTTP for proxy communication" anchor="http.proxy">
2396<t>
2397   <cref>TBD: Configured to use HTTP to proxy HTTP or other protocols.</cref>
2398</t>
2399</section>
2400<section title="Interception of HTTP for access control" anchor="http.intercept">
2401<t>
2402   <cref>TBD: Interception of HTTP traffic for initiating access control.</cref>
2403</t>
2404</section>
2405<section title="Use of HTTP by other protocols" anchor="http.others">
2406<t>
2407   <cref>TBD: Profiles of HTTP defined by other protocol.
2408   Extensions of HTTP like WebDAV.</cref>
2409</t>
2410</section>
2411<section title="Use of HTTP by media type specification" anchor="http.media">
2412<t>
2413   <cref>TBD: Instructions on composing HTTP requests via hypertext formats.</cref>
2414</t>
2415</section>
2416</section>
2417
2418<section title="Header Field Definitions" anchor="header.field.definitions">
2419<t>
2420   This section defines the syntax and semantics of HTTP/1.1 header fields
2421   related to message framing and transport protocols.
2422</t>
2423<t>
2424   For entity-header fields, both sender and recipient refer to either the
2425   client or the server, depending on who sends and who receives the entity.
2426</t>
2427
2428<section title="Connection" anchor="header.connection">
2429  <iref primary="true" item="Connection header" x:for-anchor=""/>
2430  <iref primary="true" item="Headers" subitem="Connection" x:for-anchor=""/>
2431  <x:anchor-alias value="Connection"/>
2432  <x:anchor-alias value="connection-token"/>
2433  <x:anchor-alias value="Connection-v"/>
2434<t>
2435   The general-header field "Connection" allows the sender to specify
2436   options that are desired for that particular connection and &MUST-NOT;
2437   be communicated by proxies over further connections.
2438</t>
2439<t>
2440   The Connection header's value has the following grammar:
2441</t>
2442<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Connection"/><iref primary="true" item="Grammar" subitem="Connection-v"/><iref primary="true" item="Grammar" subitem="connection-token"/>
2443  <x:ref>Connection</x:ref>       = "Connection" ":" <x:ref>OWS</x:ref> <x:ref>Connection-v</x:ref>
2444  <x:ref>Connection-v</x:ref>     = 1#<x:ref>connection-token</x:ref>
2445  <x:ref>connection-token</x:ref> = <x:ref>token</x:ref>
2446</artwork></figure>
2447<t>
2448   HTTP/1.1 proxies &MUST; parse the Connection header field before a
2449   message is forwarded and, for each connection-token in this field,
2450   remove any header field(s) from the message with the same name as the
2451   connection-token. Connection options are signaled by the presence of
2452   a connection-token in the Connection header field, not by any
2453   corresponding additional header field(s), since the additional header
2454   field may not be sent if there are no parameters associated with that
2455   connection option.
2456</t>
2457<t>
2458   Message headers listed in the Connection header &MUST-NOT; include
2459   end-to-end headers, such as Cache-Control.
2460</t>
2461<t>
2462   HTTP/1.1 defines the "close" connection option for the sender to
2463   signal that the connection will be closed after completion of the
2464   response. For example,
2465</t>
2466<figure><artwork type="example">
2467  Connection: close
2468</artwork></figure>
2469<t>
2470   in either the request or the response header fields indicates that
2471   the connection &SHOULD-NOT;  be considered `persistent' (<xref target="persistent.connections"/>)
2472   after the current request/response is complete.
2473</t>
2474<t>
2475   An HTTP/1.1 client that does not support persistent connections &MUST;
2476   include the "close" connection option in every request message.
2477</t>
2478<t>
2479   An HTTP/1.1 server that does not support persistent connections &MUST;
2480   include the "close" connection option in every response message that
2481   does not have a 1xx (informational) status code.
2482</t>
2483<t>
2484   A system receiving an HTTP/1.0 (or lower-version) message that
2485   includes a Connection header &MUST;, for each connection-token in this
2486   field, remove and ignore any header field(s) from the message with
2487   the same name as the connection-token. This protects against mistaken
2488   forwarding of such header fields by pre-HTTP/1.1 proxies. See <xref target="compatibility.with.http.1.0.persistent.connections"/>.
2489</t>
2490</section>
2491
2492<section title="Content-Length" anchor="header.content-length">
2493  <iref primary="true" item="Content-Length header" x:for-anchor=""/>
2494  <iref primary="true" item="Headers" subitem="Content-Length" x:for-anchor=""/>
2495  <x:anchor-alias value="Content-Length"/>
2496  <x:anchor-alias value="Content-Length-v"/>
2497<t>
2498   The entity-header field "Content-Length" indicates the size of the
2499   entity-body, in number of OCTETs, sent to the recipient or,
2500   in the case of the HEAD method, the size of the entity-body that
2501   would have been sent had the request been a GET.
2502</t>
2503<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Content-Length"/><iref primary="true" item="Grammar" subitem="Content-Length-v"/>
2504  <x:ref>Content-Length</x:ref>   = "Content-Length" ":" <x:ref>OWS</x:ref> 1*<x:ref>Content-Length-v</x:ref>
2505  <x:ref>Content-Length-v</x:ref> = 1*<x:ref>DIGIT</x:ref>
2506</artwork></figure>
2507<t>
2508   An example is
2509</t>
2510<figure><artwork type="example">
2511  Content-Length: 3495
2512</artwork></figure>
2513<t>
2514   Applications &SHOULD; use this field to indicate the transfer-length of
2515   the message-body, unless this is prohibited by the rules in <xref target="message.length"/>.
2516</t>
2517<t>
2518   Any Content-Length greater than or equal to zero is a valid value.
2519   <xref target="message.length"/> describes how to determine the length of a message-body
2520   if a Content-Length is not given.
2521</t>
2522<t>
2523   Note that the meaning of this field is significantly different from
2524   the corresponding definition in MIME, where it is an optional field
2525   used within the "message/external-body" content-type. In HTTP, it
2526   &SHOULD; be sent whenever the message's length can be determined prior
2527   to being transferred, unless this is prohibited by the rules in
2528   <xref target="message.length"/>.
2529</t>
2530</section>
2531
2532<section title="Date" anchor="header.date">
2533  <iref primary="true" item="Date header" x:for-anchor=""/>
2534  <iref primary="true" item="Headers" subitem="Date" x:for-anchor=""/>
2535  <x:anchor-alias value="Date"/>
2536  <x:anchor-alias value="Date-v"/>
2537<t>
2538   The general-header field "Date" represents the date and time at which
2539   the message was originated, having the same semantics as orig-date in
2540   <xref target="RFC5322" x:fmt="of" x:sec="3.6.1"/>. The field value is an
2541   HTTP-date, as described in <xref target="date.time.formats.full.date"/>;
2542   it &MUST; be sent in rfc1123-date format.
2543</t>
2544<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Date"/><iref primary="true" item="Grammar" subitem="Date-v"/>
2545  <x:ref>Date</x:ref>   = "Date" ":" <x:ref>OWS</x:ref> <x:ref>Date-v</x:ref>
2546  <x:ref>Date-v</x:ref> = <x:ref>HTTP-date</x:ref>
2547</artwork></figure>
2548<t>
2549   An example is
2550</t>
2551<figure><artwork type="example">
2552  Date: Tue, 15 Nov 1994 08:12:31 GMT
2553</artwork></figure>
2554<t>
2555   Origin servers &MUST; include a Date header field in all responses,
2556   except in these cases:
2557  <list style="numbers">
2558      <t>If the response status code is 100 (Continue) or 101 (Switching
2559         Protocols), the response &MAY; include a Date header field, at
2560         the server's option.</t>
2561
2562      <t>If the response status code conveys a server error, e.g. 500
2563         (Internal Server Error) or 503 (Service Unavailable), and it is
2564         inconvenient or impossible to generate a valid Date.</t>
2565
2566      <t>If the server does not have a clock that can provide a
2567         reasonable approximation of the current time, its responses
2568         &MUST-NOT; include a Date header field. In this case, the rules
2569         in <xref target="clockless.origin.server.operation"/> &MUST; be followed.</t>
2570  </list>
2571</t>
2572<t>
2573   A received message that does not have a Date header field &MUST; be
2574   assigned one by the recipient if the message will be cached by that
2575   recipient or gatewayed via a protocol which requires a Date. An HTTP
2576   implementation without a clock &MUST-NOT; cache responses without
2577   revalidating them on every use. An HTTP cache, especially a shared
2578   cache, &SHOULD; use a mechanism, such as NTP <xref target="RFC1305"/>, to synchronize its
2579   clock with a reliable external standard.
2580</t>
2581<t>
2582   Clients &SHOULD; only send a Date header field in messages that include
2583   an entity-body, as in the case of the PUT and POST requests, and even
2584   then it is optional. A client without a clock &MUST-NOT; send a Date
2585   header field in a request.
2586</t>
2587<t>
2588   The HTTP-date sent in a Date header &SHOULD-NOT;  represent a date and
2589   time subsequent to the generation of the message. It &SHOULD; represent
2590   the best available approximation of the date and time of message
2591   generation, unless the implementation has no means of generating a
2592   reasonably accurate date and time. In theory, the date ought to
2593   represent the moment just before the entity is generated. In
2594   practice, the date can be generated at any time during the message
2595   origination without affecting its semantic value.
2596</t>
2597
2598<section title="Clockless Origin Server Operation" anchor="clockless.origin.server.operation">
2599<t>
2600   Some origin server implementations might not have a clock available.
2601   An origin server without a clock &MUST-NOT; assign Expires or Last-Modified
2602   values to a response, unless these values were associated
2603   with the resource by a system or user with a reliable clock. It &MAY;
2604   assign an Expires value that is known, at or before server
2605   configuration time, to be in the past (this allows "pre-expiration"
2606   of responses without storing separate Expires values for each
2607   resource).
2608</t>
2609</section>
2610</section>
2611
2612<section title="Host" anchor="header.host">
2613  <iref primary="true" item="Host header" x:for-anchor=""/>
2614  <iref primary="true" item="Headers" subitem="Host" x:for-anchor=""/>
2615  <x:anchor-alias value="Host"/>
2616  <x:anchor-alias value="Host-v"/>
2617<t>
2618   The request-header field "Host" specifies the Internet host and port
2619   number of the resource being requested, as obtained from the original
2620   URI given by the user or referring resource (generally an http URI,
2621   as described in <xref target="http.uri"/>). The Host field value &MUST; represent
2622   the naming authority of the origin server or gateway given by the
2623   original URL. This allows the origin server or gateway to
2624   differentiate between internally-ambiguous URLs, such as the root "/"
2625   URL of a server for multiple host names on a single IP address.
2626</t>
2627<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Host"/><iref primary="true" item="Grammar" subitem="Host-v"/>
2628  <x:ref>Host</x:ref>   = "Host" ":" <x:ref>OWS</x:ref> <x:ref>Host-v</x:ref>
2629  <x:ref>Host-v</x:ref> = <x:ref>uri-host</x:ref> [ ":" <x:ref>port</x:ref> ] ; <xref target="http.uri"/>
2630</artwork></figure>
2631<t>
2632   A "host" without any trailing port information implies the default
2633   port for the service requested (e.g., "80" for an HTTP URL). For
2634   example, a request on the origin server for
2635   &lt;http://www.example.org/pub/WWW/&gt; would properly include:
2636</t>
2637<figure><artwork type="example">
2638  GET /pub/WWW/ HTTP/1.1
2639  Host: www.example.org
2640</artwork></figure>
2641<t>
2642   A client &MUST; include a Host header field in all HTTP/1.1 request
2643   messages. If the requested URI does not include an Internet host
2644   name for the service being requested, then the Host header field &MUST;
2645   be given with an empty value. An HTTP/1.1 proxy &MUST; ensure that any
2646   request message it forwards does contain an appropriate Host header
2647   field that identifies the service being requested by the proxy. All
2648   Internet-based HTTP/1.1 servers &MUST; respond with a 400 (Bad Request)
2649   status code to any HTTP/1.1 request message which lacks a Host header
2650   field.
2651</t>
2652<t>
2653   See Sections <xref target="the.resource.identified.by.a.request" format="counter"/>
2654   and <xref target="changes.to.simplify.multi-homed.web.servers.and.conserve.ip.addresses" format="counter"/>
2655   for other requirements relating to Host.
2656</t>
2657</section>
2658
2659<section title="TE" anchor="header.te">
2660  <iref primary="true" item="TE header" x:for-anchor=""/>
2661  <iref primary="true" item="Headers" subitem="TE" x:for-anchor=""/>
2662  <x:anchor-alias value="TE"/>
2663  <x:anchor-alias value="TE-v"/>
2664  <x:anchor-alias value="t-codings"/>
2665  <x:anchor-alias value="te-params"/>
2666  <x:anchor-alias value="te-ext"/>
2667<t>
2668   The request-header field "TE" indicates what extension transfer-codings
2669   it is willing to accept in the response and whether or not it is
2670   willing to accept trailer fields in a chunked transfer-coding. Its
2671   value may consist of the keyword "trailers" and/or a comma-separated
2672   list of extension transfer-coding names with optional accept
2673   parameters (as described in <xref target="transfer.codings"/>).
2674</t>
2675<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="TE"/><iref primary="true" item="Grammar" subitem="TE-v"/><iref primary="true" item="Grammar" subitem="t-codings"/><iref primary="true" item="Grammar" subitem="te-params"/><iref primary="true" item="Grammar" subitem="te-ext"/>
2676  <x:ref>TE</x:ref>        = "TE" ":" <x:ref>OWS</x:ref> <x:ref>TE-v</x:ref>
2677  <x:ref>TE-v</x:ref>      = #<x:ref>t-codings</x:ref>
2678  <x:ref>t-codings</x:ref> = "trailers" / ( <x:ref>transfer-extension</x:ref> [ <x:ref>te-params</x:ref> ] )
2679  <x:ref>te-params</x:ref> = <x:ref>OWS</x:ref> ";" <x:ref>OWS</x:ref> "q=" <x:ref>qvalue</x:ref> *( <x:ref>te-ext</x:ref> )
2680  <x:ref>te-ext</x:ref>    = <x:ref>OWS</x:ref> ";" <x:ref>OWS</x:ref> <x:ref>token</x:ref> [ "=" ( <x:ref>token</x:ref> / <x:ref>quoted-string</x:ref> ) ]
2681</artwork></figure>
2682<t>
2683   The presence of the keyword "trailers" indicates that the client is
2684   willing to accept trailer fields in a chunked transfer-coding, as
2685   defined in <xref target="chunked.transfer.encoding"/>. This keyword is reserved for use with
2686   transfer-coding values even though it does not itself represent a
2687   transfer-coding.
2688</t>
2689<t>
2690   Examples of its use are:
2691</t>
2692<figure><artwork type="example">
2693  TE: deflate
2694  TE:
2695  TE: trailers, deflate;q=0.5
2696</artwork></figure>
2697<t>
2698   The TE header field only applies to the immediate connection.
2699   Therefore, the keyword &MUST; be supplied within a Connection header
2700   field (<xref target="header.connection"/>) whenever TE is present in an HTTP/1.1 message.
2701</t>
2702<t>
2703   A server tests whether a transfer-coding is acceptable, according to
2704   a TE field, using these rules:
2705  <list style="numbers">
2706    <x:lt>
2707      <t>The "chunked" transfer-coding is always acceptable. If the
2708         keyword "trailers" is listed, the client indicates that it is
2709         willing to accept trailer fields in the chunked response on
2710         behalf of itself and any downstream clients. The implication is
2711         that, if given, the client is stating that either all
2712         downstream clients are willing to accept trailer fields in the
2713         forwarded response, or that it will attempt to buffer the
2714         response on behalf of downstream recipients.
2715      </t><t>
2716         <x:h>Note:</x:h> HTTP/1.1 does not define any means to limit the size of a
2717         chunked response such that a client can be assured of buffering
2718         the entire response.</t>
2719    </x:lt>
2720    <x:lt>
2721      <t>If the transfer-coding being tested is one of the transfer-codings
2722         listed in the TE field, then it is acceptable unless it
2723         is accompanied by a qvalue of 0. (As defined in <xref target="quality.values"/>, a
2724         qvalue of 0 means "not acceptable.")</t>
2725    </x:lt>
2726    <x:lt>
2727      <t>If multiple transfer-codings are acceptable, then the
2728         acceptable transfer-coding with the highest non-zero qvalue is
2729         preferred.  The "chunked" transfer-coding always has a qvalue
2730         of 1.</t>
2731    </x:lt>
2732  </list>
2733</t>
2734<t>
2735   If the TE field-value is empty or if no TE field is present, the only
2736   transfer-coding is "chunked". A message with no transfer-coding is
2737   always acceptable.
2738</t>
2739</section>
2740
2741<section title="Trailer" anchor="header.trailer">
2742  <iref primary="true" item="Trailer header" x:for-anchor=""/>
2743  <iref primary="true" item="Headers" subitem="Trailer" x:for-anchor=""/>
2744  <x:anchor-alias value="Trailer"/>
2745  <x:anchor-alias value="Trailer-v"/>
2746<t>
2747   The general field "Trailer" indicates that the given set of
2748   header fields is present in the trailer of a message encoded with
2749   chunked transfer-coding.
2750</t>
2751<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Trailer"/><iref primary="true" item="Grammar" subitem="Trailer-v"/>
2752  <x:ref>Trailer</x:ref>   = "Trailer" ":" <x:ref>OWS</x:ref> <x:ref>Trailer-v</x:ref>
2753  <x:ref>Trailer-v</x:ref> = 1#<x:ref>field-name</x:ref>
2754</artwork></figure>
2755<t>
2756   An HTTP/1.1 message &SHOULD; include a Trailer header field in a
2757   message using chunked transfer-coding with a non-empty trailer. Doing
2758   so allows the recipient to know which header fields to expect in the
2759   trailer.
2760</t>
2761<t>
2762   If no Trailer header field is present, the trailer &SHOULD-NOT;  include
2763   any header fields. See <xref target="chunked.transfer.encoding"/> for restrictions on the use of
2764   trailer fields in a "chunked" transfer-coding.
2765</t>
2766<t>
2767   Message header fields listed in the Trailer header field &MUST-NOT;
2768   include the following header fields:
2769  <list style="symbols">
2770    <t>Transfer-Encoding</t>
2771    <t>Content-Length</t>
2772    <t>Trailer</t>
2773  </list>
2774</t>
2775</section>
2776
2777<section title="Transfer-Encoding" anchor="header.transfer-encoding">
2778  <iref primary="true" item="Transfer-Encoding header" x:for-anchor=""/>
2779  <iref primary="true" item="Headers" subitem="Transfer-Encoding" x:for-anchor=""/>
2780  <x:anchor-alias value="Transfer-Encoding"/>
2781  <x:anchor-alias value="Transfer-Encoding-v"/>
2782<t>
2783   The general-header "Transfer-Encoding" field indicates what (if any)
2784   type of transformation has been applied to the message body in order
2785   to safely transfer it between the sender and the recipient. This
2786   differs from the content-coding in that the transfer-coding is a
2787   property of the message, not of the entity.
2788</t>
2789<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Transfer-Encoding"/><iref primary="true" item="Grammar" subitem="Transfer-Encoding-v"/>
2790  <x:ref>Transfer-Encoding</x:ref>   = "Transfer-Encoding" ":" <x:ref>OWS</x:ref>
2791                        <x:ref>Transfer-Encoding-v</x:ref>
2792  <x:ref>Transfer-Encoding-v</x:ref> = 1#<x:ref>transfer-coding</x:ref>
2793</artwork></figure>
2794<t>
2795   Transfer-codings are defined in <xref target="transfer.codings"/>. An example is:
2796</t>
2797<figure><artwork type="example">
2798  Transfer-Encoding: chunked
2799</artwork></figure>
2800<t>
2801   If multiple encodings have been applied to an entity, the transfer-codings
2802   &MUST; be listed in the order in which they were applied.
2803   Additional information about the encoding parameters &MAY; be provided
2804   by other entity-header fields not defined by this specification.
2805</t>
2806<t>
2807   Many older HTTP/1.0 applications do not understand the Transfer-Encoding
2808   header.
2809</t>
2810</section>
2811
2812<section title="Upgrade" anchor="header.upgrade">
2813  <iref primary="true" item="Upgrade header" x:for-anchor=""/>
2814  <iref primary="true" item="Headers" subitem="Upgrade" x:for-anchor=""/>
2815  <x:anchor-alias value="Upgrade"/>
2816  <x:anchor-alias value="Upgrade-v"/>
2817<t>
2818   The general-header "Upgrade" allows the client to specify what
2819   additional communication protocols it supports and would like to use
2820   if the server finds it appropriate to switch protocols. The server
2821   &MUST; use the Upgrade header field within a 101 (Switching Protocols)
2822   response to indicate which protocol(s) are being switched.
2823</t>
2824<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Upgrade"/><iref primary="true" item="Grammar" subitem="Upgrade-v"/>
2825  <x:ref>Upgrade</x:ref>   = "Upgrade" ":" <x:ref>OWS</x:ref> <x:ref>Upgrade-v</x:ref>
2826  <x:ref>Upgrade-v</x:ref> = 1#<x:ref>product</x:ref>
2827</artwork></figure>
2828<t>
2829   For example,
2830</t>
2831<figure><artwork type="example">
2832  Upgrade: HTTP/2.0, SHTTP/1.3, IRC/6.9, RTA/x11
2833</artwork></figure>
2834<t>
2835   The Upgrade header field is intended to provide a simple mechanism
2836   for transition from HTTP/1.1 to some other, incompatible protocol. It
2837   does so by allowing the client to advertise its desire to use another
2838   protocol, such as a later version of HTTP with a higher major version
2839   number, even though the current request has been made using HTTP/1.1.
2840   This eases the difficult transition between incompatible protocols by
2841   allowing the client to initiate a request in the more commonly
2842   supported protocol while indicating to the server that it would like
2843   to use a "better" protocol if available (where "better" is determined
2844   by the server, possibly according to the nature of the method and/or
2845   resource being requested).
2846</t>
2847<t>
2848   The Upgrade header field only applies to switching application-layer
2849   protocols upon the existing transport-layer connection. Upgrade
2850   cannot be used to insist on a protocol change; its acceptance and use
2851   by the server is optional. The capabilities and nature of the
2852   application-layer communication after the protocol change is entirely
2853   dependent upon the new protocol chosen, although the first action
2854   after changing the protocol &MUST; be a response to the initial HTTP
2855   request containing the Upgrade header field.
2856</t>
2857<t>
2858   The Upgrade header field only applies to the immediate connection.
2859   Therefore, the upgrade keyword &MUST; be supplied within a Connection
2860   header field (<xref target="header.connection"/>) whenever Upgrade is present in an
2861   HTTP/1.1 message.
2862</t>
2863<t>
2864   The Upgrade header field cannot be used to indicate a switch to a
2865   protocol on a different connection. For that purpose, it is more
2866   appropriate to use a 301, 302, 303, or 305 redirection response.
2867</t>
2868<t>
2869   This specification only defines the protocol name "HTTP" for use by
2870   the family of Hypertext Transfer Protocols, as defined by the HTTP
2871   version rules of <xref target="http.version"/> and future updates to this
2872   specification. Any token can be used as a protocol name; however, it
2873   will only be useful if both the client and server associate the name
2874   with the same protocol.
2875</t>
2876</section>
2877
2878<section title="Via" anchor="header.via">
2879  <iref primary="true" item="Via header" x:for-anchor=""/>
2880  <iref primary="true" item="Headers" subitem="Via" x:for-anchor=""/>
2881  <x:anchor-alias value="protocol-name"/>
2882  <x:anchor-alias value="protocol-version"/>
2883  <x:anchor-alias value="pseudonym"/>
2884  <x:anchor-alias value="received-by"/>
2885  <x:anchor-alias value="received-protocol"/>
2886  <x:anchor-alias value="Via"/>
2887  <x:anchor-alias value="Via-v"/>
2888<t>
2889   The general-header field "Via" &MUST; be used by gateways and proxies to
2890   indicate the intermediate protocols and recipients between the user
2891   agent and the server on requests, and between the origin server and
2892   the client on responses. It is analogous to the "Received" field defined in
2893   <xref target="RFC5322" x:fmt="of" x:sec="3.6.7"/> and is intended to be used for tracking message forwards,
2894   avoiding request loops, and identifying the protocol capabilities of
2895   all senders along the request/response chain.
2896</t>
2897<figure><artwork type="abnf2616"><iref primary="true" item="Grammar" subitem="Via"/><iref primary="true" item="Grammar" subitem="Via-v"/><iref primary="true" item="Grammar" subitem="received-protocol"/><iref primary="true" item="Grammar" subitem="protocol-name"/><iref primary="true" item="Grammar" subitem="protocol-version"/><iref primary="true" item="Grammar" subitem="received-by"/><iref primary="true" item="Grammar" subitem="pseudonym"/>
2898  <x:ref>Via</x:ref>               = "Via" ":" <x:ref>OWS</x:ref> <x:ref>Via-v</x:ref>
2899  <x:ref>Via-v</x:ref>             = 1#( <x:ref>received-protocol</x:ref> <x:ref>RWS</x:ref> <x:ref>received-by</x:ref>
2900                          [ <x:ref>RWS</x:ref> <x:ref>comment</x:ref> ] )
2901  <x:ref>received-protocol</x:ref> = [ <x:ref>protocol-name</x:ref> "/" ] <x:ref>protocol-version</x:ref>
2902  <x:ref>protocol-name</x:ref>     = <x:ref>token</x:ref>
2903  <x:ref>protocol-version</x:ref>  = <x:ref>token</x:ref>
2904  <x:ref>received-by</x:ref>       = ( <x:ref>uri-host</x:ref> [ ":" <x:ref>port</x:ref> ] ) / <x:ref>pseudonym</x:ref>
2905  <x:ref>pseudonym</x:ref>         = <x:ref>token</x:ref>
2906</artwork></figure>
2907<t>
2908   The received-protocol indicates the protocol version of the message
2909   received by the server or client along each segment of the
2910   request/response chain. The received-protocol version is appended to
2911   the Via field value when the message is forwarded so that information
2912   about the protocol capabilities of upstream applications remains
2913   visible to all recipients.
2914</t>
2915<t>
2916   The protocol-name is optional if and only if it would be "HTTP". The
2917   received-by field is normally the host and optional port number of a
2918   recipient server or client that subsequently forwarded the message.
2919   However, if the real host is considered to be sensitive information,
2920   it &MAY; be replaced by a pseudonym. If the port is not given, it &MAY;
2921   be assumed to be the default port of the received-protocol.
2922</t>
2923<t>
2924   Multiple Via field values represents each proxy or gateway that has
2925   forwarded the message. Each recipient &MUST; append its information
2926   such that the end result is ordered according to the sequence of
2927   forwarding applications.
2928</t>
2929<t>
2930   Comments &MAY; be used in the Via header field to identify the software
2931   of the recipient proxy or gateway, analogous to the User-Agent and
2932   Server header fields. However, all comments in the Via field are
2933   optional and &MAY; be removed by any recipient prior to forwarding the
2934   message.
2935</t>
2936<t>
2937   For example, a request message could be sent from an HTTP/1.0 user
2938   agent to an internal proxy code-named "fred", which uses HTTP/1.1 to
2939   forward the request to a public proxy at p.example.net, which completes
2940   the request by forwarding it to the origin server at www.example.com.
2941   The request received by www.example.com would then have the following
2942   Via header field:
2943</t>
2944<figure><artwork type="example">
2945  Via: 1.0 fred, 1.1 p.example.net (Apache/1.1)
2946</artwork></figure>
2947<t>
2948   Proxies and gateways used as a portal through a network firewall
2949   &SHOULD-NOT;, by default, forward the names and ports of hosts within
2950   the firewall region. This information &SHOULD; only be propagated if
2951   explicitly enabled. If not enabled, the received-by host of any host
2952   behind the firewall &SHOULD; be replaced by an appropriate pseudonym
2953   for that host.
2954</t>
2955<t>
2956   For organizations that have strong privacy requirements for hiding
2957   internal structures, a proxy &MAY; combine an ordered subsequence of
2958   Via header field entries with identical received-protocol values into
2959   a single such entry. For example,
2960</t>
2961<figure><artwork type="example">
2962  Via: 1.0 ricky, 1.1 ethel, 1.1 fred, 1.0 lucy
2963</artwork></figure>
2964<t>
2965        could be collapsed to
2966</t>
2967<figure><artwork type="example">
2968  Via: 1.0 ricky, 1.1 mertz, 1.0 lucy
2969</artwork></figure>
2970<t>
2971   Applications &SHOULD-NOT;  combine multiple entries unless they are all
2972   under the same organizational control and the hosts have already been
2973   replaced by pseudonyms. Applications &MUST-NOT; combine entries which
2974   have different received-protocol values.
2975</t>
2976</section>
2977
2978</section>
2979
2980<section title="IANA Considerations" anchor="IANA.considerations">
2981<section title="Message Header Registration" anchor="message.header.registration">
2982<t>
2983   The Message Header Registry located at <eref target="http://www.iana.org/assignments/message-headers/message-header-index.html"/> should be updated
2984   with the permanent registrations below (see <xref target="RFC3864"/>):
2985</t>
2986<!--AUTOGENERATED FROM extract-header-defs.xslt, do not edit manually-->
2987<texttable align="left" suppress-title="true" anchor="iana.header.registration.table">
2988   <ttcol>Header Field Name</ttcol>
2989   <ttcol>Protocol</ttcol>
2990   <ttcol>Status</ttcol>
2991   <ttcol>Reference</ttcol>
2992
2993   <c>Connection</c>
2994   <c>http</c>
2995   <c>standard</c>
2996   <c>
2997      <xref target="header.connection"/>
2998   </c>
2999   <c>Content-Length</c>
3000   <c>http</c>
3001   <c>standard</c>
3002   <c>
3003      <xref target="header.content-length"/>
3004   </c>
3005   <c>Date</c>
3006   <c>http</c>
3007   <c>standard</c>
3008   <c>
3009      <xref target="header.date"/>
3010   </c>
3011   <c>Host</c>
3012   <c>http</c>
3013   <c>standard</c>
3014   <c>
3015      <xref target="header.host"/>
3016   </c>
3017   <c>TE</c>
3018   <c>http</c>
3019   <c>standard</c>
3020   <c>
3021      <xref target="header.te"/>
3022   </c>
3023   <c>Trailer</c>
3024   <c>http</c>
3025   <c>standard</c>
3026   <c>
3027      <xref target="header.trailer"/>
3028   </c>
3029   <c>Transfer-Encoding</c>
3030   <c>http</c>
3031   <c>standard</c>
3032   <c>
3033      <xref target="header.transfer-encoding"/>
3034   </c>
3035   <c>Upgrade</c>
3036   <c>http</c>
3037   <c>standard</c>
3038   <c>
3039      <xref target="header.upgrade"/>
3040   </c>
3041   <c>Via</c>
3042   <c>http</c>
3043   <c>standard</c>
3044   <c>
3045      <xref target="header.via"/>
3046   </c>
3047</texttable>
3048<!--(END)-->
3049<t>
3050   The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force".
3051</t>
3052</section>
3053
3054<section title="URI Scheme Registration" anchor="uri.scheme.registration">
3055<t>
3056   The entries for the "http" and "https" URI Schemes in the registry located at
3057   <eref target="http://www.iana.org/assignments/uri-schemes.html"/>
3058   should be updated to point to Sections <xref target="http.uri" format="counter"/>
3059   and <xref target="https.uri" format="counter"/> of this document
3060   (see <xref target="RFC4395"/>).
3061</t>
3062</section>
3063
3064<section title="Internet Media Type Registrations" anchor="internet.media.type.http">
3065<t>
3066   This document serves as the specification for the Internet media types
3067   "message/http" and "application/http". The following is to be registered with
3068   IANA (see <xref target="RFC4288"/>).
3069</t>
3070<section title="Internet Media Type message/http" anchor="internet.media.type.message.http">
3071<iref item="Media Type" subitem="message/http" primary="true"/>
3072<iref item="message/http Media Type" primary="true"/>
3073<t>
3074   The message/http type can be used to enclose a single HTTP request or
3075   response message, provided that it obeys the MIME restrictions for all
3076   "message" types regarding line length and encodings.
3077</t>
3078<t>
3079  <list style="hanging" x:indent="12em">
3080    <t hangText="Type name:">
3081      message
3082    </t>
3083    <t hangText="Subtype name:">
3084      http
3085    </t>
3086    <t hangText="Required parameters:">
3087      none
3088    </t>
3089    <t hangText="Optional parameters:">
3090      version, msgtype
3091      <list style="hanging">
3092        <t hangText="version:">
3093          The HTTP-Version number of the enclosed message
3094          (e.g., "1.1"). If not present, the version can be
3095          determined from the first line of the body.
3096        </t>
3097        <t hangText="msgtype:">
3098          The message type -- "request" or "response". If not
3099          present, the type can be determined from the first
3100          line of the body.
3101        </t>
3102      </list>
3103    </t>
3104    <t hangText="Encoding considerations:">
3105      only "7bit", "8bit", or "binary" are permitted
3106    </t>
3107    <t hangText="Security considerations:">
3108      none
3109    </t>
3110    <t hangText="Interoperability considerations:">
3111      none
3112    </t>
3113    <t hangText="Published specification:">
3114      This specification (see <xref target="internet.media.type.message.http"/>).
3115    </t>
3116    <t hangText="Applications that use this media type:">
3117    </t>
3118    <t hangText="Additional information:">
3119      <list style="hanging">
3120        <t hangText="Magic number(s):">none</t>
3121        <t hangText="File extension(s):">none</t>
3122        <t hangText="Macintosh file type code(s):">none</t>
3123      </list>
3124    </t>
3125    <t hangText="Person and email address to contact for further information:">
3126      See Authors Section.
3127    </t>
3128    <t hangText="Intended usage:">
3129      COMMON
3130    </t>
3131    <t hangText="Restrictions on usage:">
3132      none
3133    </t>
3134    <t hangText="Author/Change controller:">
3135      IESG
3136    </t>
3137  </list>
3138</t>
3139</section>
3140<section title="Internet Media Type application/http" anchor="internet.media.type.application.http">
3141<iref item="Media Type" subitem="application/http" primary="true"/>
3142<iref item="application/http Media Type" primary="true"/>
3143<t>
3144   The application/http type can be used to enclose a pipeline of one or more
3145   HTTP request or response messages (not intermixed).
3146</t>
3147<t>
3148  <list style="hanging" x:indent="12em">
3149    <t hangText="Type name:">
3150      application
3151    </t>
3152    <t hangText="Subtype name:">
3153      http
3154    </t>
3155    <t hangText="Required parameters:">
3156      none
3157    </t>
3158    <t hangText="Optional parameters:">
3159      version, msgtype
3160      <list style="hanging">
3161        <t hangText="version:">
3162          The HTTP-Version number of the enclosed messages
3163          (e.g., "1.1"). If not present, the version can be
3164          determined from the first line of the body.
3165        </t>
3166        <t hangText="msgtype:">
3167          The message type -- "request" or "response". If not
3168          present, the type can be determined from the first
3169          line of the body.
3170        </t>
3171      </list>
3172    </t>
3173    <t hangText="Encoding considerations:">
3174      HTTP messages enclosed by this type
3175      are in "binary" format; use of an appropriate
3176      Content-Transfer-Encoding is required when
3177      transmitted via E-mail.
3178    </t>
3179    <t hangText="Security considerations:">
3180      none
3181    </t>
3182    <t hangText="Interoperability considerations:">
3183      none
3184    </t>
3185    <t hangText="Published specification:">
3186      This specification (see <xref target="internet.media.type.application.http"/>).
3187    </t>
3188    <t hangText="Applications that use this media type:">
3189    </t>
3190    <t hangText="Additional information:">
3191      <list style="hanging">
3192        <t hangText="Magic number(s):">none</t>
3193        <t hangText="File extension(s):">none</t>
3194        <t hangText="Macintosh file type code(s):">none</t>
3195      </list>
3196    </t>
3197    <t hangText="Person and email address to contact for further information:">
3198      See Authors Section.
3199    </t>
3200    <t hangText="Intended usage:">
3201      COMMON
3202    </t>
3203    <t hangText="Restrictions on usage:">
3204      none
3205    </t>
3206    <t hangText="Author/Change controller:">
3207      IESG
3208    </t>
3209  </list>
3210</t>
3211</section>
3212</section>
3213
3214<section title="Transfer Coding Registry" anchor="transfer.coding.registration">
3215<t>
3216   The registration procedure for HTTP Transfer Codings is now defined
3217   by <xref target="transfer.coding.registry"/> of this document.
3218</t>
3219<t>
3220   The HTTP Transfer Codings Registry located at <eref target="http://www.iana.org/assignments/http-parameters"/>
3221   should be updated with the registration below:
3222</t>
3223<texttable align="left" suppress-title="true" anchor="iana.transfer.coding.registration.table">
3224   <ttcol>Name</ttcol>
3225   <ttcol>Description</ttcol>
3226   <ttcol>Reference</ttcol>
3227   <c>Chunked</c>
3228   <c>Transfer in a series of chunks</c>
3229   <c>
3230      <xref target="chunked.transfer.encoding"/>
3231   </c>
3232</texttable>
3233</section>
3234
3235</section>
3236
3237<section title="Security Considerations" anchor="security.considerations">
3238<t>
3239   This section is meant to inform application developers, information
3240   providers, and users of the security limitations in HTTP/1.1 as
3241   described by this document. The discussion does not include
3242   definitive solutions to the problems revealed, though it does make
3243   some suggestions for reducing security risks.
3244</t>
3245
3246<section title="Personal Information" anchor="personal.information">
3247<t>
3248   HTTP clients are often privy to large amounts of personal information
3249   (e.g. the user's name, location, mail address, passwords, encryption
3250   keys, etc.), and &SHOULD; be very careful to prevent unintentional
3251   leakage of this information.
3252   We very strongly recommend that a convenient interface be provided
3253   for the user to control dissemination of such information, and that
3254   designers and implementors be particularly careful in this area.
3255   History shows that errors in this area often create serious security
3256   and/or privacy problems and generate highly adverse publicity for the
3257   implementor's company.
3258</t>
3259</section>
3260
3261<section title="Abuse of Server Log Information" anchor="abuse.of.server.log.information">
3262<t>
3263   A server is in the position to save personal data about a user's
3264   requests which might identify their reading patterns or subjects of
3265   interest. This information is clearly confidential in nature and its
3266   handling can be constrained by law in certain countries. People using
3267   HTTP to provide data are responsible for ensuring that
3268   such material is not distributed without the permission of any
3269   individuals that are identifiable by the published results.
3270</t>
3271</section>
3272
3273<section title="Attacks Based On File and Path Names" anchor="attack.pathname">
3274<t>
3275   Implementations of HTTP origin servers &SHOULD; be careful to restrict
3276   the documents returned by HTTP requests to be only those that were
3277   intended by the server administrators. If an HTTP server translates
3278   HTTP URIs directly into file system calls, the server &MUST; take
3279   special care not to serve files that were not intended to be
3280   delivered to HTTP clients. For example, UNIX, Microsoft Windows, and
3281   other operating systems use ".." as a path component to indicate a
3282   directory level above the current one. On such a system, an HTTP
3283   server &MUST; disallow any such construct in the request-target if it
3284   would otherwise allow access to a resource outside those intended to
3285   be accessible via the HTTP server. Similarly, files intended for
3286   reference only internally to the server (such as access control
3287   files, configuration files, and script code) &MUST; be protected from
3288   inappropriate retrieval, since they might contain sensitive
3289   information. Experience has shown that minor bugs in such HTTP server
3290   implementations have turned into security risks.
3291</t>
3292</section>
3293
3294<section title="DNS Spoofing" anchor="dns.spoofing">
3295<t>
3296   Clients using HTTP rely heavily on the Domain Name Service, and are
3297   thus generally prone to security attacks based on the deliberate
3298   mis-association of IP addresses and DNS names. Clients need to be
3299   cautious in assuming the continuing validity of an IP number/DNS name
3300   association.
3301</t>
3302<t>
3303   In particular, HTTP clients &SHOULD; rely on their name resolver for
3304   confirmation of an IP number/DNS name association, rather than
3305   caching the result of previous host name lookups. Many platforms
3306   already can cache host name lookups locally when appropriate, and
3307   they &SHOULD; be configured to do so. It is proper for these lookups to
3308   be cached, however, only when the TTL (Time To Live) information
3309   reported by the name server makes it likely that the cached
3310   information will remain useful.
3311</t>
3312<t>
3313   If HTTP clients cache the results of host name lookups in order to
3314   achieve a performance improvement, they &MUST; observe the TTL
3315   information reported by DNS.
3316</t>
3317<t>
3318   If HTTP clients do not observe this rule, they could be spoofed when
3319   a previously-accessed server's IP address changes. As network
3320   renumbering is expected to become increasingly common <xref target="RFC1900"/>, the
3321   possibility of this form of attack will grow. Observing this
3322   requirement thus reduces this potential security vulnerability.
3323</t>
3324<t>
3325   This requirement also improves the load-balancing behavior of clients
3326   for replicated servers using the same DNS name and reduces the
3327   likelihood of a user's experiencing failure in accessing sites which
3328   use that strategy.
3329</t>
3330</section>
3331
3332<section title="Proxies and Caching" anchor="attack.proxies">
3333<t>
3334   By their very nature, HTTP proxies are men-in-the-middle, and
3335   represent an opportunity for man-in-the-middle attacks. Compromise of
3336   the systems on which the proxies run can result in serious security
3337   and privacy problems. Proxies have access to security-related
3338   information, personal information about individual users and
3339   organizations, and proprietary information belonging to users and
3340   content providers. A compromised proxy, or a proxy implemented or
3341   configured without regard to security and privacy considerations,
3342   might be used in the commission of a wide range of potential attacks.
3343</t>
3344<t>
3345   Proxy operators should protect the systems on which proxies run as
3346   they would protect any system that contains or transports sensitive
3347   information. In particular, log information gathered at proxies often
3348   contains highly sensitive personal information, and/or information
3349   about organizations. Log information should be carefully guarded, and
3350   appropriate guidelines for use developed and followed. (<xref target="abuse.of.server.log.information"/>).
3351</t>
3352<t>
3353   Proxy implementors should consider the privacy and security
3354   implications of their design and coding decisions, and of the
3355   configuration options they provide to proxy operators (especially the
3356   default configuration).
3357</t>
3358<t>
3359   Users of a proxy need to be aware that they are no trustworthier than
3360   the people who run the proxy; HTTP itself cannot solve this problem.
3361</t>
3362<t>
3363   The judicious use of cryptography, when appropriate, may suffice to
3364   protect against a broad range of security and privacy attacks. Such
3365   cryptography is beyond the scope of the HTTP/1.1 specification.
3366</t>
3367</section>
3368
3369<section title="Denial of Service Attacks on Proxies" anchor="attack.DoS">
3370<t>
3371   They exist. They are hard to defend against. Research continues.
3372   Beware.
3373</t>
3374</section>
3375</section>
3376
3377<section title="Acknowledgments" anchor="ack">
3378<t>
3379   HTTP has evolved considerably over the years. It has
3380   benefited from a large and active developer community--the many
3381   people who have participated on the www-talk mailing list--and it is
3382   that community which has been most responsible for the success of
3383   HTTP and of the World-Wide Web in general. Marc Andreessen, Robert
3384   Cailliau, Daniel W. Connolly, Bob Denny, John Franks, Jean-Francois
3385   Groff, Phillip M. Hallam-Baker, Hakon W. Lie, Ari Luotonen, Rob
3386   McCool, Lou Montulli, Dave Raggett, Tony Sanders, and Marc
3387   VanHeyningen deserve special recognition for their efforts in
3388   defining early aspects of the protocol.
3389</t>
3390<t>
3391   This document has benefited greatly from the comments of all those
3392   participating in the HTTP-WG. In addition to those already mentioned,
3393   the following individuals have contributed to this specification:
3394</t>
3395<t>
3396   Gary Adams, Harald Tveit Alvestrand, Keith Ball, Brian Behlendorf,
3397   Paul Burchard, Maurizio Codogno, Mike Cowlishaw, Roman Czyborra,
3398   Michael A. Dolan, Daniel DuBois, David J. Fiander, Alan Freier, Marc Hedlund, Greg Herlihy,
3399   Koen Holtman, Alex Hopmann, Bob Jernigan, Shel Kaphan, Rohit Khare,
3400   John Klensin, Martijn Koster, Alexei Kosut, David M. Kristol,
3401   Daniel LaLiberte, Ben Laurie, Paul J. Leach, Albert Lunde,
3402   John C. Mallery, Jean-Philippe Martin-Flatin, Mitra, David Morris,
3403   Gavin Nicol, Ross Patterson, Bill Perry, Jeffrey Perry, Scott Powers, Owen Rees,
3404   Luigi Rizzo, David Robinson, Marc Salomon, Rich Salz,
3405   Allan M. Schiffman, Jim Seidman, Chuck Shotton, Eric W. Sink,
3406   Simon E. Spero, Richard N. Taylor, Robert S. Thau,
3407   Bill (BearHeart) Weinman, Francois Yergeau, Mary Ellen Zurko,
3408   Josh Cohen.
3409</t>
3410<t>
3411   Thanks to the "cave men" of Palo Alto. You know who you are.
3412</t>
3413<t>
3414   Jim Gettys (the editor of <xref target="RFC2616"/>) wishes particularly
3415   to thank Roy Fielding, the editor of <xref target="RFC2068"/>, along
3416   with John Klensin, Jeff Mogul, Paul Leach, Dave Kristol, Koen
3417   Holtman, John Franks, Josh Cohen, Alex Hopmann, Scott Lawrence, and
3418   Larry Masinter for their help. And thanks go particularly to Jeff
3419   Mogul and Scott Lawrence for performing the "MUST/MAY/SHOULD" audit.
3420</t>
3421<t>
3422   The Apache Group, Anselm Baird-Smith, author of Jigsaw, and Henrik
3423   Frystyk implemented RFC 2068 early, and we wish to thank them for the
3424   discovery of many of the problems that this document attempts to
3425   rectify.
3426</t>
3427<t>
3428   This specification makes heavy use of the augmented BNF and generic
3429   constructs defined by David H. Crocker for <xref target="RFC5234"/>. Similarly, it
3430   reuses many of the definitions provided by Nathaniel Borenstein and
3431   Ned Freed for MIME <xref target="RFC2045"/>. We hope that their inclusion in this
3432   specification will help reduce past confusion over the relationship
3433   between HTTP and Internet mail message formats.
3434</t>
3435</section>
3436
3437</middle>
3438<back>
3439
3440<references title="Normative References">
3441
3442<reference anchor="ISO-8859-1">
3443  <front>
3444    <title>
3445     Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1
3446    </title>
3447    <author>
3448      <organization>International Organization for Standardization</organization>
3449    </author>
3450    <date year="1998"/>
3451  </front>
3452  <seriesInfo name="ISO/IEC" value="8859-1:1998"/>
3453</reference>
3454
3455<reference anchor="Part2">
3456  <front>
3457    <title abbrev="HTTP/1.1">HTTP/1.1, part 2: Message Semantics</title>
3458    <author initials="R." surname="Fielding" fullname="Roy T. Fielding" role="editor">
3459      <organization abbrev="Day Software">Day Software</organization>
3460      <address><email>fielding@gbiv.com</email></address>
3461    </author>
3462    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3463      <organization>One Laptop per Child</organization>
3464      <address><email>jg@laptop.org</email></address>
3465    </author>
3466    <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
3467      <organization abbrev="HP">Hewlett-Packard Company</organization>
3468      <address><email>JeffMogul@acm.org</email></address>
3469    </author>
3470    <author initials="H." surname="Frystyk" fullname="Henrik Frystyk Nielsen">
3471      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3472      <address><email>henrikn@microsoft.com</email></address>
3473    </author>
3474    <author initials="L." surname="Masinter" fullname="Larry Masinter">
3475      <organization abbrev="Adobe Systems">Adobe Systems, Incorporated</organization>
3476      <address><email>LMM@acm.org</email></address>
3477    </author>
3478    <author initials="P." surname="Leach" fullname="Paul J. Leach">
3479      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3480      <address><email>paulle@microsoft.com</email></address>
3481    </author>
3482    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3483      <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
3484      <address><email>timbl@w3.org</email></address>
3485    </author>
3486    <author initials="Y." surname="Lafon" fullname="Yves Lafon" role="editor">
3487      <organization abbrev="W3C">World Wide Web Consortium</organization>
3488      <address><email>ylafon@w3.org</email></address>
3489    </author>
3490    <author initials="J. F." surname="Reschke" fullname="Julian F. Reschke" role="editor">
3491      <organization abbrev="greenbytes">greenbytes GmbH</organization>
3492      <address><email>julian.reschke@greenbytes.de</email></address>
3493    </author>
3494    <date month="&ID-MONTH;" year="&ID-YEAR;"/>
3495  </front>
3496  <seriesInfo name="Internet-Draft" value="draft-ietf-httpbis-p2-semantics-&ID-VERSION;"/>
3497  <x:source href="p2-semantics.xml" basename="p2-semantics"/>
3498</reference>
3499
3500<reference anchor="Part3">
3501  <front>
3502    <title abbrev="HTTP/1.1">HTTP/1.1, part 3: Message Payload and Content Negotiation</title>
3503    <author initials="R." surname="Fielding" fullname="Roy T. Fielding" role="editor">
3504      <organization abbrev="Day Software">Day Software</organization>
3505      <address><email>fielding@gbiv.com</email></address>
3506    </author>
3507    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3508      <organization>One Laptop per Child</organization>
3509      <address><email>jg@laptop.org</email></address>
3510    </author>
3511    <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
3512      <organization abbrev="HP">Hewlett-Packard Company</organization>
3513      <address><email>JeffMogul@acm.org</email></address>
3514    </author>
3515    <author initials="H." surname="Frystyk" fullname="Henrik Frystyk Nielsen">
3516      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3517      <address><email>henrikn@microsoft.com</email></address>
3518    </author>
3519    <author initials="L." surname="Masinter" fullname="Larry Masinter">
3520      <organization abbrev="Adobe Systems">Adobe Systems, Incorporated</organization>
3521      <address><email>LMM@acm.org</email></address>
3522    </author>
3523    <author initials="P." surname="Leach" fullname="Paul J. Leach">
3524      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3525      <address><email>paulle@microsoft.com</email></address>
3526    </author>
3527    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3528      <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
3529      <address><email>timbl@w3.org</email></address>
3530    </author>
3531    <author initials="Y." surname="Lafon" fullname="Yves Lafon" role="editor">
3532      <organization abbrev="W3C">World Wide Web Consortium</organization>
3533      <address><email>ylafon@w3.org</email></address>
3534    </author>
3535    <author initials="J. F." surname="Reschke" fullname="Julian F. Reschke" role="editor">
3536      <organization abbrev="greenbytes">greenbytes GmbH</organization>
3537      <address><email>julian.reschke@greenbytes.de</email></address>
3538    </author>
3539    <date month="&ID-MONTH;" year="&ID-YEAR;"/>
3540  </front>
3541  <seriesInfo name="Internet-Draft" value="draft-ietf-httpbis-p3-payload-&ID-VERSION;"/>
3542  <x:source href="p3-payload.xml" basename="p3-payload"/>
3543</reference>
3544
3545<reference anchor="Part5">
3546  <front>
3547    <title abbrev="HTTP/1.1">HTTP/1.1, part 5: Range Requests and Partial Responses</title>
3548    <author initials="R." surname="Fielding" fullname="Roy T. Fielding" role="editor">
3549      <organization abbrev="Day Software">Day Software</organization>
3550      <address><email>fielding@gbiv.com</email></address>
3551    </author>
3552    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3553      <organization>One Laptop per Child</organization>
3554      <address><email>jg@laptop.org</email></address>
3555    </author>
3556    <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
3557      <organization abbrev="HP">Hewlett-Packard Company</organization>
3558      <address><email>JeffMogul@acm.org</email></address>
3559    </author>
3560    <author initials="H." surname="Frystyk" fullname="Henrik Frystyk Nielsen">
3561      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3562      <address><email>henrikn@microsoft.com</email></address>
3563    </author>
3564    <author initials="L." surname="Masinter" fullname="Larry Masinter">
3565      <organization abbrev="Adobe Systems">Adobe Systems, Incorporated</organization>
3566      <address><email>LMM@acm.org</email></address>
3567    </author>
3568    <author initials="P." surname="Leach" fullname="Paul J. Leach">
3569      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3570      <address><email>paulle@microsoft.com</email></address>
3571    </author>
3572    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3573      <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
3574      <address><email>timbl@w3.org</email></address>
3575    </author>
3576    <author initials="Y." surname="Lafon" fullname="Yves Lafon" role="editor">
3577      <organization abbrev="W3C">World Wide Web Consortium</organization>
3578      <address><email>ylafon@w3.org</email></address>
3579    </author>
3580    <author initials="J. F." surname="Reschke" fullname="Julian F. Reschke" role="editor">
3581      <organization abbrev="greenbytes">greenbytes GmbH</organization>
3582      <address><email>julian.reschke@greenbytes.de</email></address>
3583    </author>
3584    <date month="&ID-MONTH;" year="&ID-YEAR;"/>
3585  </front>
3586  <seriesInfo name="Internet-Draft" value="draft-ietf-httpbis-p5-range-&ID-VERSION;"/>
3587  <x:source href="p5-range.xml" basename="p5-range"/>
3588</reference>
3589
3590<reference anchor="Part6">
3591  <front>
3592    <title abbrev="HTTP/1.1">HTTP/1.1, part 6: Caching</title>
3593    <author initials="R." surname="Fielding" fullname="Roy T. Fielding" role="editor">
3594      <organization abbrev="Day Software">Day Software</organization>
3595      <address><email>fielding@gbiv.com</email></address>
3596    </author>
3597    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3598      <organization>One Laptop per Child</organization>
3599      <address><email>jg@laptop.org</email></address>
3600    </author>
3601    <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
3602      <organization abbrev="HP">Hewlett-Packard Company</organization>
3603      <address><email>JeffMogul@acm.org</email></address>
3604    </author>
3605    <author initials="H." surname="Frystyk" fullname="Henrik Frystyk Nielsen">
3606      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3607      <address><email>henrikn@microsoft.com</email></address>
3608    </author>
3609    <author initials="L." surname="Masinter" fullname="Larry Masinter">
3610      <organization abbrev="Adobe Systems">Adobe Systems, Incorporated</organization>
3611      <address><email>LMM@acm.org</email></address>
3612    </author>
3613    <author initials="P." surname="Leach" fullname="Paul J. Leach">
3614      <organization abbrev="Microsoft">Microsoft Corporation</organization>
3615      <address><email>paulle@microsoft.com</email></address>
3616    </author>
3617    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3618      <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
3619      <address><email>timbl@w3.org</email></address>
3620    </author>
3621    <author initials="Y." surname="Lafon" fullname="Yves Lafon" role="editor">
3622      <organization abbrev="W3C">World Wide Web Consortium</organization>
3623      <address><email>ylafon@w3.org</email></address>
3624    </author>
3625    <author initials="M." surname="Nottingham" fullname="Mark Nottingham" role="editor">
3626      <organization />
3627      <address><email>mnot@mnot.net</email></address>
3628    </author>
3629    <author initials="J. F." surname="Reschke" fullname="Julian F. Reschke" role="editor">
3630      <organization abbrev="greenbytes">greenbytes GmbH</organization>
3631      <address><email>julian.reschke@greenbytes.de</email></address>
3632    </author>
3633    <date month="&ID-MONTH;" year="&ID-YEAR;"/>
3634  </front>
3635  <seriesInfo name="Internet-Draft" value="draft-ietf-httpbis-p6-cache-&ID-VERSION;"/>
3636  <x:source href="p6-cache.xml" basename="p6-cache"/>
3637</reference>
3638
3639<reference anchor="RFC5234">
3640  <front>
3641    <title abbrev="ABNF for Syntax Specifications">Augmented BNF for Syntax Specifications: ABNF</title>
3642    <author initials="D." surname="Crocker" fullname="Dave Crocker" role="editor">
3643      <organization>Brandenburg InternetWorking</organization>
3644      <address>
3645      <postal>
3646      <street>675 Spruce Dr.</street>
3647      <city>Sunnyvale</city>
3648      <region>CA</region>
3649      <code>94086</code>
3650      <country>US</country></postal>
3651      <phone>+1.408.246.8253</phone>
3652      <email>dcrocker@bbiw.net</email></address> 
3653    </author>
3654    <author initials="P." surname="Overell" fullname="Paul Overell">
3655      <organization>THUS plc.</organization>
3656      <address>
3657      <postal>
3658      <street>1/2 Berkeley Square</street>
3659      <street>99 Berkely Street</street>
3660      <city>Glasgow</city>
3661      <code>G3 7HR</code>
3662      <country>UK</country></postal>
3663      <email>paul.overell@thus.net</email></address>
3664    </author>
3665    <date month="January" year="2008"/>
3666  </front>
3667  <seriesInfo name="STD" value="68"/>
3668  <seriesInfo name="RFC" value="5234"/>
3669</reference>
3670
3671<reference anchor="RFC2119">
3672  <front>
3673    <title>Key words for use in RFCs to Indicate Requirement Levels</title>
3674    <author initials="S." surname="Bradner" fullname="Scott Bradner">
3675      <organization>Harvard University</organization>
3676      <address><email>sob@harvard.edu</email></address>
3677    </author>
3678    <date month="March" year="1997"/>
3679  </front>
3680  <seriesInfo name="BCP" value="14"/>
3681  <seriesInfo name="RFC" value="2119"/>
3682</reference>
3683
3684<reference anchor="RFC3986">
3685 <front>
3686  <title abbrev='URI Generic Syntax'>Uniform Resource Identifier (URI): Generic Syntax</title>
3687  <author initials='T.' surname='Berners-Lee' fullname='Tim Berners-Lee'>
3688    <organization abbrev="W3C/MIT">World Wide Web Consortium</organization>
3689    <address>
3690       <email>timbl@w3.org</email>
3691       <uri>http://www.w3.org/People/Berners-Lee/</uri>
3692    </address>
3693  </author>
3694  <author initials='R.' surname='Fielding' fullname='Roy T. Fielding'>
3695    <organization abbrev="Day Software">Day Software</organization>
3696    <address>
3697      <email>fielding@gbiv.com</email>
3698      <uri>http://roy.gbiv.com/</uri>
3699    </address>
3700  </author>
3701  <author initials='L.' surname='Masinter' fullname='Larry Masinter'>
3702    <organization abbrev="Adobe Systems">Adobe Systems Incorporated</organization>
3703    <address>
3704      <email>LMM@acm.org</email>
3705      <uri>http://larry.masinter.net/</uri>
3706    </address>
3707  </author>
3708  <date month='January' year='2005'></date>
3709 </front>
3710 <seriesInfo name="RFC" value="3986"/>
3711 <seriesInfo name="STD" value="66"/>
3712</reference>
3713
3714<reference anchor="USASCII">
3715  <front>
3716    <title>Coded Character Set -- 7-bit American Standard Code for Information Interchange</title>
3717    <author>
3718      <organization>American National Standards Institute</organization>
3719    </author>
3720    <date year="1986"/>
3721  </front>
3722  <seriesInfo name="ANSI" value="X3.4"/>
3723</reference>
3724
3725</references>
3726
3727<references title="Informative References">
3728
3729<reference anchor="Nie1997" target="http://doi.acm.org/10.1145/263105.263157">
3730  <front>
3731    <title>Network Performance Effects of HTTP/1.1, CSS1, and PNG</title>
3732    <author initials="H.F.." surname="Nielsen" fullname="H.F. Nielsen">
3733      <organization/>
3734    </author>
3735    <author initials="J." surname="Gettys" fullname="J. Gettys">
3736      <organization/>
3737    </author>
3738    <author initials="E." surname="Prud'hommeaux" fullname="E. Prud'hommeaux">
3739      <organization/>
3740    </author>
3741    <author initials="H." surname="Lie" fullname="H. Lie">
3742      <organization/>
3743    </author>
3744    <author initials="C." surname="Lilley" fullname="C. Lilley">
3745      <organization/>
3746    </author>
3747    <date year="1997" month="September"/>
3748  </front>
3749  <seriesInfo name="ACM" value="Proceedings of the ACM SIGCOMM '97 conference on Applications, technologies, architectures, and protocols for computer communication SIGCOMM '97"/>
3750</reference>
3751
3752<reference anchor="Pad1995" target="http://portal.acm.org/citation.cfm?id=219094">
3753  <front>
3754    <title>Improving HTTP Latency</title>
3755    <author initials="V.N." surname="Padmanabhan" fullname="Venkata N. Padmanabhan">
3756      <organization/>
3757    </author>
3758    <author initials="J.C." surname="Mogul" fullname="Jeffrey C. Mogul">
3759      <organization/>
3760    </author>
3761    <date year="1995" month="December"/>
3762  </front>
3763  <seriesInfo name="Computer Networks and ISDN Systems" value="v. 28, pp. 25-35"/>
3764</reference>
3765
3766<reference anchor="RFC1123">
3767  <front>
3768    <title>Requirements for Internet Hosts - Application and Support</title>
3769    <author initials="R." surname="Braden" fullname="Robert Braden">
3770      <organization>University of Southern California (USC), Information Sciences Institute</organization>
3771      <address><email>Braden@ISI.EDU</email></address>
3772    </author>
3773    <date month="October" year="1989"/>
3774  </front>
3775  <seriesInfo name="STD" value="3"/>
3776  <seriesInfo name="RFC" value="1123"/>
3777</reference>
3778
3779<reference anchor="RFC1305">
3780  <front>
3781    <title>Network Time Protocol (Version 3) Specification, Implementation</title>
3782    <author initials="D." surname="Mills" fullname="David L. Mills">
3783      <organization>University of Delaware, Electrical Engineering Department</organization>
3784      <address><email>mills@udel.edu</email></address>
3785    </author>
3786    <date month="March" year="1992"/>
3787  </front>
3788  <seriesInfo name="RFC" value="1305"/>
3789</reference>
3790
3791<reference anchor="RFC1900">
3792  <front>
3793    <title>Renumbering Needs Work</title>
3794    <author initials="B." surname="Carpenter" fullname="Brian E. Carpenter">
3795      <organization>CERN, Computing and Networks Division</organization>
3796      <address><email>brian@dxcoms.cern.ch</email></address>
3797    </author>
3798    <author initials="Y." surname="Rekhter" fullname="Yakov Rekhter">
3799      <organization>cisco Systems</organization>
3800      <address><email>yakov@cisco.com</email></address>
3801    </author>
3802    <date month="February" year="1996"/>
3803  </front>
3804  <seriesInfo name="RFC" value="1900"/>
3805</reference>
3806
3807<reference anchor="RFC1945">
3808  <front>
3809    <title abbrev="HTTP/1.0">Hypertext Transfer Protocol -- HTTP/1.0</title>
3810    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3811      <organization>MIT, Laboratory for Computer Science</organization>
3812      <address><email>timbl@w3.org</email></address>
3813    </author>
3814    <author initials="R.T." surname="Fielding" fullname="Roy T. Fielding">
3815      <organization>University of California, Irvine, Department of Information and Computer Science</organization>
3816      <address><email>fielding@ics.uci.edu</email></address>
3817    </author>
3818    <author initials="H.F." surname="Nielsen" fullname="Henrik Frystyk Nielsen">
3819      <organization>W3 Consortium, MIT Laboratory for Computer Science</organization>
3820      <address><email>frystyk@w3.org</email></address>
3821    </author>
3822    <date month="May" year="1996"/>
3823  </front>
3824  <seriesInfo name="RFC" value="1945"/>
3825</reference>
3826
3827<reference anchor="RFC2045">
3828  <front>
3829    <title abbrev="Internet Message Bodies">Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies</title>
3830    <author initials="N." surname="Freed" fullname="Ned Freed">
3831      <organization>Innosoft International, Inc.</organization>
3832      <address><email>ned@innosoft.com</email></address>
3833    </author>
3834    <author initials="N.S." surname="Borenstein" fullname="Nathaniel S. Borenstein">
3835      <organization>First Virtual Holdings</organization>
3836      <address><email>nsb@nsb.fv.com</email></address>
3837    </author>
3838    <date month="November" year="1996"/>
3839  </front>
3840  <seriesInfo name="RFC" value="2045"/>
3841</reference>
3842
3843<reference anchor="RFC2047">
3844  <front>
3845    <title abbrev="Message Header Extensions">MIME (Multipurpose Internet Mail Extensions) Part Three: Message Header Extensions for Non-ASCII Text</title>
3846    <author initials="K." surname="Moore" fullname="Keith Moore">
3847      <organization>University of Tennessee</organization>
3848      <address><email>moore@cs.utk.edu</email></address>
3849    </author>
3850    <date month="November" year="1996"/>
3851  </front>
3852  <seriesInfo name="RFC" value="2047"/>
3853</reference>
3854
3855<reference anchor="RFC2068">
3856  <front>
3857    <title abbrev="HTTP/1.1">Hypertext Transfer Protocol -- HTTP/1.1</title>
3858    <author initials="R." surname="Fielding" fullname="Roy T. Fielding">
3859      <organization>University of California, Irvine, Department of Information and Computer Science</organization>
3860      <address><email>fielding@ics.uci.edu</email></address>
3861    </author>
3862    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3863      <organization>MIT Laboratory for Computer Science</organization>
3864      <address><email>jg@w3.org</email></address>
3865    </author>
3866    <author initials="J." surname="Mogul" fullname="Jeffrey C. Mogul">
3867      <organization>Digital Equipment Corporation, Western Research Laboratory</organization>
3868      <address><email>mogul@wrl.dec.com</email></address>
3869    </author>
3870    <author initials="H." surname="Nielsen" fullname="Henrik Frystyk Nielsen">
3871      <organization>MIT Laboratory for Computer Science</organization>
3872      <address><email>frystyk@w3.org</email></address>
3873    </author>
3874    <author initials="T." surname="Berners-Lee" fullname="Tim Berners-Lee">
3875      <organization>MIT Laboratory for Computer Science</organization>
3876      <address><email>timbl@w3.org</email></address>
3877    </author>
3878    <date month="January" year="1997"/>
3879  </front>
3880  <seriesInfo name="RFC" value="2068"/>
3881</reference>
3882
3883<reference anchor='RFC2109'>
3884  <front>
3885    <title>HTTP State Management Mechanism</title>
3886    <author initials='D.M.' surname='Kristol' fullname='David M. Kristol'>
3887      <organization>Bell Laboratories, Lucent Technologies</organization>
3888      <address><email>dmk@bell-labs.com</email></address>
3889    </author>
3890    <author initials='L.' surname='Montulli' fullname='Lou Montulli'>
3891      <organization>Netscape Communications Corp.</organization>
3892      <address><email>montulli@netscape.com</email></address>
3893    </author>
3894    <date year='1997' month='February' />
3895  </front>
3896  <seriesInfo name='RFC' value='2109' />
3897</reference>
3898
3899<reference anchor="RFC2145">
3900  <front>
3901    <title abbrev="HTTP Version Numbers">Use and Interpretation of HTTP Version Numbers</title>
3902    <author initials="J.C." surname="Mogul" fullname="Jeffrey C. Mogul">
3903      <organization>Western Research Laboratory</organization>
3904      <address><email>mogul@wrl.dec.com</email></address>
3905    </author>
3906    <author initials="R.T." surname="Fielding" fullname="Roy T. Fielding">
3907      <organization>Department of Information and Computer Science</organization>
3908      <address><email>fielding@ics.uci.edu</email></address>
3909    </author>
3910    <author initials="J." surname="Gettys" fullname="Jim Gettys">
3911      <organization>MIT Laboratory for Computer Science</organization>
3912      <address><email>jg@w3.org</email></address>
3913    </author>
3914    <author initials="H.F." surname="Nielsen" fullname="Henrik Frystyk Nielsen">
3915      <organization>W3 Consortium</organization>
3916      <address><email>frystyk@w3.org</email></address>
3917    </author>
3918    <date month="May" year="1997"/>
3919  </front>
3920  <seriesInfo name="RFC" value="2145"/>
3921</reference>
3922
3923<reference anchor="RFC2616">
3924  <front>
3925    <title>Hypertext Transfer Protocol -- HTTP/1.1</title>
3926    <author initials="R." surname="Fielding" fullname="R. Fielding">
3927      <organization>University of California, Irvine</organization>
3928      <address><email>fielding@ics.uci.edu</email></address>
3929    </author>
3930    <author initials="J." surname="Gettys" fullname="J. Gettys">
3931      <organization>W3C</organization>
3932      <address><email>jg@w3.org</email></address>
3933    </author>
3934    <author initials="J." surname="Mogul" fullname="J. Mogul">
3935      <organization>Compaq Computer Corporation</organization>
3936      <address><email>mogul@wrl.dec.com</email></address>
3937    </author>
3938    <author initials="H." surname="Frystyk" fullname="H. Frystyk">
3939      <organization>MIT Laboratory for Computer Science</organization>
3940      <address><email>frystyk@w3.org</email></address>
3941    </author>
3942    <author initials="L." surname="Masinter" fullname="L. Masinter">
3943      <organization>Xerox Corporation</organization>
3944      <address><email>masinter@parc.xerox.com</email></address>
3945    </author>
3946    <author initials="P." surname="Leach" fullname="P. Leach">
3947      <organization>Microsoft Corporation</organization>
3948      <address><email>paulle@microsoft.com</email></address>
3949    </author>
3950    <author initials="T." surname="Berners-Lee" fullname="T. Berners-Lee">
3951      <organization>W3C</organization>
3952      <address><email>timbl@w3.org</email></address>
3953    </author>
3954    <date month="June" year="1999"/>
3955  </front>
3956  <seriesInfo name="RFC" value="2616"/>
3957</reference>
3958
3959<reference anchor='RFC2818'>
3960  <front>
3961    <title>HTTP Over TLS</title>
3962    <author initials='E.' surname='Rescorla' fullname='Eric Rescorla'>
3963      <organization>RTFM, Inc.</organization>
3964      <address><email>ekr@rtfm.com</email></address>
3965    </author>
3966    <date year='2000' month='May' />
3967  </front>
3968  <seriesInfo name='RFC' value='2818' />
3969</reference>
3970
3971<reference anchor='RFC2965'>
3972  <front>
3973    <title>HTTP State Management Mechanism</title>
3974    <author initials='D. M.' surname='Kristol' fullname='David M. Kristol'>
3975      <organization>Bell Laboratories, Lucent Technologies</organization>
3976      <address><email>dmk@bell-labs.com</email></address>
3977    </author>
3978    <author initials='L.' surname='Montulli' fullname='Lou Montulli'>
3979      <organization>Epinions.com, Inc.</organization>
3980      <address><email>lou@montulli.org</email></address>
3981    </author>
3982    <date year='2000' month='October' />
3983  </front>
3984  <seriesInfo name='RFC' value='2965' />
3985</reference>
3986
3987<reference anchor='RFC3864'>
3988  <front>
3989    <title>Registration Procedures for Message Header Fields</title>
3990    <author initials='G.' surname='Klyne' fullname='G. Klyne'>
3991      <organization>Nine by Nine</organization>
3992      <address><email>GK-IETF@ninebynine.org</email></address>
3993    </author>
3994    <author initials='M.' surname='Nottingham' fullname='M. Nottingham'>
3995      <organization>BEA Systems</organization>
3996      <address><email>mnot@pobox.com</email></address>
3997    </author>
3998    <author initials='J.' surname='Mogul' fullname='J. Mogul'>
3999      <organization>HP Labs</organization>
4000      <address><email>JeffMogul@acm.org</email></address>
4001    </author>
4002    <date year='2004' month='September' />
4003  </front>
4004  <seriesInfo name='BCP' value='90' />
4005  <seriesInfo name='RFC' value='3864' />
4006</reference>
4007
4008<reference anchor="RFC4288">
4009  <front>
4010    <title>Media Type Specifications and Registration Procedures</title>
4011    <author initials="N." surname="Freed" fullname="N. Freed">
4012      <organization>Sun Microsystems</organization>
4013      <address>
4014        <email>ned.freed@mrochek.com</email>
4015      </address>
4016    </author>
4017    <author initials="J." surname="Klensin" fullname="J. Klensin">
4018      <organization/>
4019      <address>
4020        <email>klensin+ietf@jck.com</email>
4021      </address>
4022    </author>
4023    <date year="2005" month="December"/>
4024  </front>
4025  <seriesInfo name="BCP" value="13"/>
4026  <seriesInfo name="RFC" value="4288"/>
4027</reference>
4028
4029<reference anchor='RFC4395'>
4030  <front>
4031    <title>Guidelines and Registration Procedures for New URI Schemes</title>
4032    <author initials='T.' surname='Hansen' fullname='T. Hansen'>
4033      <organization>AT&amp;T Laboratories</organization>
4034      <address>
4035        <email>tony+urireg@maillennium.att.com</email>
4036      </address>
4037    </author>
4038    <author initials='T.' surname='Hardie' fullname='T. Hardie'>
4039      <organization>Qualcomm, Inc.</organization>
4040      <address>
4041        <email>hardie@qualcomm.com</email>
4042      </address>
4043    </author>
4044    <author initials='L.' surname='Masinter' fullname='L. Masinter'>
4045      <organization>Adobe Systems</organization>
4046      <address>
4047        <email>LMM@acm.org</email>
4048      </address>
4049    </author>
4050    <date year='2006' month='February' />
4051  </front>
4052  <seriesInfo name='BCP' value='115' />
4053  <seriesInfo name='RFC' value='4395' />
4054</reference>
4055
4056<reference anchor='RFC5226'>
4057  <front>
4058    <title>Guidelines for Writing an IANA Considerations Section in RFCs</title>
4059    <author initials='T.' surname='Narten' fullname='T. Narten'>
4060      <organization>IBM</organization>
4061      <address><email>narten@us.ibm.com</email></address>
4062    </author>
4063    <author initials='H.' surname='Alvestrand' fullname='H. Alvestrand'>
4064      <organization>Google</organization>
4065      <address><email>Harald@Alvestrand.no</email></address>
4066    </author>
4067    <date year='2008' month='May' />
4068  </front>
4069  <seriesInfo name='BCP' value='26' />
4070  <seriesInfo name='RFC' value='5226' />
4071</reference>
4072
4073<reference anchor="RFC5322">
4074  <front>
4075    <title>Internet Message Format</title>
4076    <author initials="P." surname="Resnick" fullname="P. Resnick">
4077      <organization>Qualcomm Incorporated</organization>
4078    </author>
4079    <date year="2008" month="October"/>
4080  </front>
4081  <seriesInfo name="RFC" value="5322"/>
4082</reference>
4083
4084<reference anchor="Kri2001" target="http://arxiv.org/abs/cs.SE/0105018">
4085  <front>
4086    <title>HTTP Cookies: Standards, Privacy, and Politics</title>
4087    <author initials="D." surname="Kristol" fullname="David M. Kristol">
4088      <organization/>
4089    </author>
4090    <date year="2001" month="November"/>
4091  </front>
4092  <seriesInfo name="ACM Transactions on Internet Technology" value="Vol. 1, #2"/>
4093</reference>
4094
4095<reference anchor="Spe" target="http://sunsite.unc.edu/mdma-release/http-prob.html">
4096  <front>
4097  <title>Analysis of HTTP Performance Problems</title>
4098  <author initials="S." surname="Spero" fullname="Simon E. Spero">
4099    <organization/>
4100  </author>
4101  <date/>
4102  </front>
4103</reference>
4104
4105<reference anchor="Tou1998" target="http://www.isi.edu/touch/pubs/http-perf96/">
4106  <front>
4107  <title>Analysis of HTTP Performance</title>
4108  <author initials="J." surname="Touch" fullname="Joe Touch">
4109    <organization>USC/Information Sciences Institute</organization>
4110    <address><email>touch@isi.edu</email></address>
4111  </author>
4112  <author initials="J." surname="Heidemann" fullname="John Heidemann">
4113    <organization>USC/Information Sciences Institute</organization>
4114    <address><email>johnh@isi.edu</email></address>
4115  </author>
4116  <author initials="K." surname="Obraczka" fullname="Katia Obraczka">
4117    <organization>USC/Information Sciences Institute</organization>
4118    <address><email>katia@isi.edu</email></address>
4119  </author>
4120  <date year="1998" month="Aug"/>
4121  </front>
4122  <seriesInfo name="ISI Research Report" value="ISI/RR-98-463"/>
4123  <annotation>(original report dated Aug. 1996)</annotation>
4124</reference>
4125
4126</references>
4127
4128
4129<section title="Tolerant Applications" anchor="tolerant.applications">
4130<t>
4131   Although this document specifies the requirements for the generation
4132   of HTTP/1.1 messages, not all applications will be correct in their
4133   implementation. We therefore recommend that operational applications
4134   be tolerant of deviations whenever those deviations can be
4135   interpreted unambiguously.
4136</t>
4137<t>
4138   Clients &SHOULD; be tolerant in parsing the Status-Line and servers
4139   tolerant when parsing the Request-Line. In particular, they &SHOULD;
4140   accept any amount of WSP characters between fields, even though
4141   only a single SP is required.
4142</t>
4143<t>
4144   The line terminator for header fields is the sequence CRLF.
4145   However, we recommend that applications, when parsing such headers,
4146   recognize a single LF as a line terminator and ignore the leading CR.
4147</t>
4148<t>
4149   The character set of an entity-body &SHOULD; be labeled as the lowest
4150   common denominator of the character codes used within that body, with
4151   the exception that not labeling the entity is preferred over labeling
4152   the entity with the labels US-ASCII or ISO-8859-1. See &payload;.
4153</t>
4154<t>
4155   Additional rules for requirements on parsing and encoding of dates
4156   and other potential problems with date encodings include:
4157</t>
4158<t>
4159  <list style="symbols">
4160     <t>HTTP/1.1 clients and caches &SHOULD; assume that an RFC-850 date
4161        which appears to be more than 50 years in the future is in fact
4162        in the past (this helps solve the "year 2000" problem).</t>
4163
4164     <t>An HTTP/1.1 implementation &MAY; internally represent a parsed
4165        Expires date as earlier than the proper value, but &MUST-NOT;
4166        internally represent a parsed Expires date as later than the
4167        proper value.</t>
4168
4169     <t>All expiration-related calculations &MUST; be done in GMT. The
4170        local time zone &MUST-NOT; influence the calculation or comparison
4171        of an age or expiration time.</t>
4172
4173     <t>If an HTTP header incorrectly carries a date value with a time
4174        zone other than GMT, it &MUST; be converted into GMT using the
4175        most conservative possible conversion.</t>
4176  </list>
4177</t>
4178</section>
4179
4180<section title="Compatibility with Previous Versions" anchor="compatibility">
4181<t>
4182   HTTP has been in use by the World-Wide Web global information initiative
4183   since 1990. The first version of HTTP, later referred to as HTTP/0.9,
4184   was a simple protocol for hypertext data transfer across the Internet
4185   with only a single method and no metadata.
4186   HTTP/1.0, as defined by <xref target="RFC1945"/>, added a range of request
4187   methods and MIME-like messaging that could include metadata about the data
4188   transferred and modifiers on the request/response semantics. However,
4189   HTTP/1.0 did not sufficiently take into consideration the effects of
4190   hierarchical proxies, caching, the need for persistent connections, or
4191   name-based virtual hosts. The proliferation of incompletely-implemented
4192   applications calling themselves "HTTP/1.0" further necessitated a
4193   protocol version change in order for two communicating applications
4194   to determine each other's true capabilities.
4195</t>
4196<t>
4197   HTTP/1.1 remains compatible with HTTP/1.0 by including more stringent
4198   requirements that enable reliable implementations, adding only
4199   those new features that will either be safely ignored by an HTTP/1.0
4200   recipient or only sent when communicating with a party advertising
4201   compliance with HTTP/1.1.
4202</t>
4203<t>
4204   It is beyond the scope of a protocol specification to mandate
4205   compliance with previous versions. HTTP/1.1 was deliberately
4206   designed, however, to make supporting previous versions easy. It is
4207   worth noting that, at the time of composing this specification
4208   (1996), we would expect commercial HTTP/1.1 servers to:
4209  <list style="symbols">
4210     <t>recognize the format of the Request-Line for HTTP/0.9, 1.0, and
4211        1.1 requests;</t>
4212
4213     <t>understand any valid request in the format of HTTP/0.9, 1.0, or
4214        1.1;</t>
4215
4216     <t>respond appropriately with a message in the same major version
4217        used by the client.</t>
4218  </list>
4219</t>
4220<t>
4221   And we would expect HTTP/1.1 clients to:
4222  <list style="symbols">
4223     <t>recognize the format of the Status-Line for HTTP/1.0 and 1.1
4224        responses;</t>
4225
4226     <t>understand any valid response in the format of HTTP/0.9, 1.0, or
4227        1.1.</t>
4228  </list>
4229</t>
4230<t>
4231   For most implementations of HTTP/1.0, each connection is established
4232   by the client prior to the request and closed by the server after
4233   sending the response. Some implementations implement the Keep-Alive
4234   version of persistent connections described in <xref x:sec="19.7.1" x:fmt="of" target="RFC2068"/>.
4235</t>
4236
4237<section title="Changes from HTTP/1.0" anchor="changes.from.1.0">
4238<t>
4239   This section summarizes major differences between versions HTTP/1.0
4240   and HTTP/1.1.
4241</t>
4242
4243<section title="Changes to Simplify Multi-homed Web Servers and Conserve IP Addresses" anchor="changes.to.simplify.multi-homed.web.servers.and.conserve.ip.addresses">
4244<t>
4245   The requirements that clients and servers support the Host request-header,
4246   report an error if the Host request-header (<xref target="header.host"/>) is
4247   missing from an HTTP/1.1 request, and accept absolute URIs (<xref target="request-target"/>)
4248   are among the most important changes defined by this
4249   specification.
4250</t>
4251<t>
4252   Older HTTP/1.0 clients assumed a one-to-one relationship of IP
4253   addresses and servers; there was no other established mechanism for
4254   distinguishing the intended server of a request than the IP address
4255   to which that request was directed. The changes outlined above will
4256   allow the Internet, once older HTTP clients are no longer common, to
4257   support multiple Web sites from a single IP address, greatly
4258   simplifying large operational Web servers, where allocation of many
4259   IP addresses to a single host has created serious problems. The
4260   Internet will also be able to recover the IP addresses that have been
4261   allocated for the sole purpose of allowing special-purpose domain
4262   names to be used in root-level HTTP URLs. Given the rate of growth of
4263   the Web, and the number of servers already deployed, it is extremely
4264   important that all implementations of HTTP (including updates to
4265   existing HTTP/1.0 applications) correctly implement these
4266   requirements:
4267  <list style="symbols">
4268     <t>Both clients and servers &MUST; support the Host request-header.</t>
4269
4270     <t>A client that sends an HTTP/1.1 request &MUST; send a Host header.</t>
4271
4272     <t>Servers &MUST; report a 400 (Bad Request) error if an HTTP/1.1
4273        request does not include a Host request-header.</t>
4274
4275     <t>Servers &MUST; accept absolute URIs.</t>
4276  </list>
4277</t>
4278</section>
4279</section>
4280
4281<section title="Compatibility with HTTP/1.0 Persistent Connections" anchor="compatibility.with.http.1.0.persistent.connections">
4282<t>
4283   Some clients and servers might wish to be compatible with some
4284   previous implementations of persistent connections in HTTP/1.0
4285   clients and servers. Persistent connections in HTTP/1.0 are
4286   explicitly negotiated as they are not the default behavior. HTTP/1.0
4287   experimental implementations of persistent connections are faulty,
4288   and the new facilities in HTTP/1.1 are designed to rectify these
4289   problems. The problem was that some existing 1.0 clients may be
4290   sending Keep-Alive to a proxy server that doesn't understand
4291   Connection, which would then erroneously forward it to the next
4292   inbound server, which would establish the Keep-Alive connection and
4293   result in a hung HTTP/1.0 proxy waiting for the close on the
4294   response. The result is that HTTP/1.0 clients must be prevented from
4295   using Keep-Alive when talking to proxies.
4296</t>
4297<t>
4298   However, talking to proxies is the most important use of persistent
4299   connections, so that prohibition is clearly unacceptable. Therefore,
4300   we need some other mechanism for indicating a persistent connection
4301   is desired, which is safe to use even when talking to an old proxy
4302   that ignores Connection. Persistent connections are the default for
4303   HTTP/1.1 messages; we introduce a new keyword (Connection: close) for
4304   declaring non-persistence. See <xref target="header.connection"/>.
4305</t>
4306<t>
4307   The original HTTP/1.0 form of persistent connections (the Connection:
4308   Keep-Alive and Keep-Alive header) is documented in <xref x:sec="19.7.1" x:fmt="of" target="RFC2068"/>.
4309</t>
4310</section>
4311
4312<section title="Changes from RFC 2068" anchor="changes.from.rfc.2068">
4313<t>
4314   This specification has been carefully audited to correct and
4315   disambiguate key word usage; RFC 2068 had many problems in respect to
4316   the conventions laid out in <xref target="RFC2119"/>.
4317</t>
4318<t>
4319   Transfer-coding and message lengths all interact in ways that
4320   required fixing exactly when chunked encoding is used (to allow for
4321   transfer encoding that may not be self delimiting); it was important
4322   to straighten out exactly how message lengths are computed. (Sections
4323   <xref target="transfer.codings" format="counter"/>, <xref target="message.length" format="counter"/>,
4324   <xref target="header.content-length" format="counter"/>,
4325   see also <xref target="Part3"/>, <xref target="Part5"/> and <xref target="Part6"/>)
4326</t>
4327<t>
4328   The use and interpretation of HTTP version numbers has been clarified
4329   by <xref target="RFC2145"/>. Require proxies to upgrade requests to highest protocol
4330   version they support to deal with problems discovered in HTTP/1.0
4331   implementations (<xref target="http.version"/>)
4332</t>
4333<t>
4334   Quality Values of zero should indicate that "I don't want something"
4335   to allow clients to refuse a representation. (<xref target="quality.values"/>)
4336</t>
4337<t>
4338   Transfer-coding had significant problems, particularly with
4339   interactions with chunked encoding. The solution is that transfer-codings
4340   become as full fledged as content-codings. This involves
4341   adding an IANA registry for transfer-codings (separate from content
4342   codings), a new header field (TE) and enabling trailer headers in the
4343   future. Transfer encoding is a major performance benefit, so it was
4344   worth fixing <xref target="Nie1997"/>. TE also solves another, obscure, downward
4345   interoperability problem that could have occurred due to interactions
4346   between authentication trailers, chunked encoding and HTTP/1.0
4347   clients.(Section <xref target="transfer.codings" format="counter"/>, <xref target="chunked.transfer.encoding" format="counter"/>,
4348   and <xref target="header.te" format="counter"/>)
4349</t>
4350</section>
4351
4352<section title="Changes from RFC 2616" anchor="changes.from.rfc.2616">
4353<t>
4354  Empty list elements in list productions have been deprecated.
4355  (<xref target="notation.abnf"/>)
4356</t>
4357<t>
4358  Rules about implicit linear whitespace between certain grammar productions
4359  have been removed; now it's only allowed when specifically pointed out
4360  in the ABNF. The NUL character is no longer allowed in comment and quoted-string
4361  text. The quoted-pair rule no longer allows escaping NUL, CR or LF.
4362  Non-ASCII content in header fields and reason phrase has been obsoleted and
4363  made opaque (the TEXT rule was removed)
4364  (<xref target="basic.rules"/>)
4365</t>
4366<t>
4367  Clarify that HTTP-Version is case sensitive.
4368  (<xref target="http.version"/>)
4369</t>
4370<t>
4371  Remove reference to non-existant identity transfer-coding value tokens.
4372  (Sections <xref format="counter" target="transfer.codings"/> and
4373  <xref format="counter" target="message.length"/>)
4374</t>
4375<t>
4376  Clarification that the chunk length does not include
4377  the count of the octets in the chunk header and trailer.
4378  (<xref target="chunked.transfer.encoding"/>)
4379</t>
4380<t>
4381  Require that invalid whitespace around field-names be rejected.
4382  (<xref target="header.fields"/>)
4383</t>
4384<t>
4385  Update use of abs_path production from RFC1808 to the path-absolute + query
4386  components of RFC3986.
4387  (<xref target="request-target"/>)
4388</t>
4389<t>
4390  Clarify exactly when close connection options must be sent.
4391  (<xref target="header.connection"/>)
4392</t>
4393</section>
4394</section>
4395
4396<section xmlns:x="http://purl.org/net/xml2rfc/ext" title="Collected ABNF" anchor="collected.abnf">
4397<figure>
4398<artwork type="abnf" name="p1-messaging.parsed-abnf">
4399<x:ref>BWS</x:ref> = OWS
4400
4401<x:ref>Cache-Control</x:ref> = &lt;Cache-Control, defined in [Part6], Section 3.4&gt;
4402<x:ref>Chunked-Body</x:ref> = *chunk last-chunk trailer-part CRLF
4403<x:ref>Connection</x:ref> = "Connection:" OWS Connection-v
4404<x:ref>Connection-v</x:ref> = *( "," OWS ) connection-token *( OWS "," [ OWS
4405 connection-token ] )
4406<x:ref>Content-Length</x:ref> = "Content-Length:" OWS 1*Content-Length-v
4407<x:ref>Content-Length-v</x:ref> = 1*DIGIT
4408
4409<x:ref>Date</x:ref> = "Date:" OWS Date-v
4410<x:ref>Date-v</x:ref> = HTTP-date
4411
4412<x:ref>GMT</x:ref> = %x47.4D.54 ; GMT
4413
4414<x:ref>HTTP-Prot-Name</x:ref> = %x48.54.54.50 ; HTTP
4415<x:ref>HTTP-Version</x:ref> = HTTP-Prot-Name "/" 1*DIGIT "." 1*DIGIT
4416<x:ref>HTTP-date</x:ref> = rfc1123-date / obs-date
4417<x:ref>HTTP-message</x:ref> = start-line *( header-field CRLF ) CRLF [ message-body
4418 ]
4419<x:ref>Host</x:ref> = "Host:" OWS Host-v
4420<x:ref>Host-v</x:ref> = uri-host [ ":" port ]
4421
4422<x:ref>Method</x:ref> = token
4423
4424<x:ref>OWS</x:ref> = *( [ obs-fold ] WSP )
4425
4426<x:ref>Pragma</x:ref> = &lt;Pragma, defined in [Part6], Section 3.4&gt;
4427
4428<x:ref>RWS</x:ref> = 1*( [ obs-fold ] WSP )
4429<x:ref>Reason-Phrase</x:ref> = *( WSP / VCHAR / obs-text )
4430<x:ref>Request</x:ref> = Request-Line *( ( general-header / request-header /
4431 entity-header ) CRLF ) CRLF [ message-body ]
4432<x:ref>Request-Line</x:ref> = Method SP request-target SP HTTP-Version CRLF
4433<x:ref>Response</x:ref> = Status-Line *( ( general-header / response-header /
4434 entity-header ) CRLF ) CRLF [ message-body ]
4435
4436<x:ref>Status-Code</x:ref> = 3DIGIT
4437<x:ref>Status-Line</x:ref> = HTTP-Version SP Status-Code SP Reason-Phrase CRLF
4438
4439<x:ref>TE</x:ref> = "TE:" OWS TE-v
4440<x:ref>TE-v</x:ref> = [ ( "," / t-codings ) *( OWS "," [ OWS t-codings ] ) ]
4441<x:ref>Trailer</x:ref> = "Trailer:" OWS Trailer-v
4442<x:ref>Trailer-v</x:ref> = *( "," OWS ) field-name *( OWS "," [ OWS field-name ] )
4443<x:ref>Transfer-Encoding</x:ref> = "Transfer-Encoding:" OWS Transfer-Encoding-v
4444<x:ref>Transfer-Encoding-v</x:ref> = *( "," OWS ) transfer-coding *( OWS "," [ OWS
4445 transfer-coding ] )
4446
4447<x:ref>URI</x:ref> = &lt;URI, defined in [RFC3986], Section 3&gt;
4448<x:ref>URI-reference</x:ref> = &lt;URI-reference, defined in [RFC3986], Section 4.1&gt;
4449<x:ref>Upgrade</x:ref> = "Upgrade:" OWS Upgrade-v
4450<x:ref>Upgrade-v</x:ref> = *( "," OWS ) product *( OWS "," [ OWS product ] )
4451
4452<x:ref>Via</x:ref> = "Via:" OWS Via-v
4453<x:ref>Via-v</x:ref> = *( "," OWS ) received-protocol RWS received-by [ RWS comment
4454 ] *( OWS "," [ OWS received-protocol RWS received-by [ RWS comment ]
4455 ] )
4456
4457<x:ref>Warning</x:ref> = &lt;Warning, defined in [Part6], Section 3.6&gt;
4458
4459<x:ref>absolute-URI</x:ref> = &lt;absolute-URI, defined in [RFC3986], Section 4.3&gt;
4460<x:ref>asctime-date</x:ref> = day-name SP date3 SP time-of-day SP year
4461<x:ref>attribute</x:ref> = token
4462<x:ref>authority</x:ref> = &lt;authority, defined in [RFC3986], Section 3.2&gt;
4463
4464<x:ref>chunk</x:ref> = chunk-size *WSP [ chunk-ext ] CRLF chunk-data CRLF
4465<x:ref>chunk-data</x:ref> = 1*OCTET
4466<x:ref>chunk-ext</x:ref> = *( ";" *WSP chunk-ext-name [ "=" chunk-ext-val ] *WSP )
4467<x:ref>chunk-ext-name</x:ref> = token
4468<x:ref>chunk-ext-val</x:ref> = token / quoted-string
4469<x:ref>chunk-size</x:ref> = 1*HEXDIG
4470<x:ref>comment</x:ref> = "(" *( ctext / quoted-pair / comment ) ")"
4471<x:ref>connection-token</x:ref> = token
4472<x:ref>ctext</x:ref> = OWS / %x21-27 ; '!'-'''
4473 / %x2A-5B ; '*'-'['
4474 / %x5D-7E ; ']'-'~'
4475 / obs-text
4476
4477<x:ref>date1</x:ref> = day SP month SP year
4478<x:ref>date2</x:ref> = day "-" month "-" 2DIGIT
4479<x:ref>date3</x:ref> = month SP ( 2DIGIT / ( SP DIGIT ) )
4480<x:ref>day</x:ref> = 2DIGIT
4481<x:ref>day-name</x:ref> = %x4D.6F.6E ; Mon
4482 / %x54.75.65 ; Tue
4483 / %x57.65.64 ; Wed
4484 / %x54.68.75 ; Thu
4485 / %x46.72.69 ; Fri
4486 / %x53.61.74 ; Sat
4487 / %x53.75.6E ; Sun
4488<x:ref>day-name-l</x:ref> = %x4D.6F.6E.64.61.79 ; Monday
4489 / %x54.75.65.73.64.61.79 ; Tuesday
4490 / %x57.65.64.6E.65.73.64.61.79 ; Wednesday
4491 / %x54.68.75.72.73.64.61.79 ; Thursday
4492 / %x46.72.69.64.61.79 ; Friday
4493 / %x53.61.74.75.72.64.61.79 ; Saturday
4494 / %x53.75.6E.64.61.79 ; Sunday
4495
4496<x:ref>entity-body</x:ref> = &lt;entity-body, defined in [Part3], Section 3.2&gt;
4497<x:ref>entity-header</x:ref> = &lt;entity-header, defined in [Part3], Section 3.1&gt;
4498
4499<x:ref>field-content</x:ref> = *( WSP / VCHAR / obs-text )
4500<x:ref>field-name</x:ref> = token
4501<x:ref>field-value</x:ref> = *( field-content / OWS )
4502
4503<x:ref>general-header</x:ref> = Cache-Control / Connection / Date / Pragma / Trailer
4504 / Transfer-Encoding / Upgrade / Via / Warning
4505
4506<x:ref>header-field</x:ref> = field-name ":" OWS [ field-value ] OWS
4507<x:ref>hour</x:ref> = 2DIGIT
4508<x:ref>http-URI</x:ref> = "http://" authority path-abempty [ "?" query ]
4509<x:ref>https-URI</x:ref> = "https://" authority path-abempty [ "?" query ]
4510
4511<x:ref>last-chunk</x:ref> = 1*"0" *WSP [ chunk-ext ] CRLF
4512
4513<x:ref>message-body</x:ref> = entity-body /
4514 &lt;entity-body encoded as per Transfer-Encoding&gt;
4515<x:ref>minute</x:ref> = 2DIGIT
4516<x:ref>month</x:ref> = %x4A.61.6E ; Jan
4517 / %x46.65.62 ; Feb
4518 / %x4D.61.72 ; Mar
4519 / %x41.70.72 ; Apr
4520 / %x4D.61.79 ; May
4521 / %x4A.75.6E ; Jun
4522 / %x4A.75.6C ; Jul
4523 / %x41.75.67 ; Aug
4524 / %x53.65.70 ; Sep
4525 / %x4F.63.74 ; Oct
4526 / %x4E.6F.76 ; Nov
4527 / %x44.65.63 ; Dec
4528
4529<x:ref>obs-date</x:ref> = rfc850-date / asctime-date
4530<x:ref>obs-fold</x:ref> = CRLF
4531<x:ref>obs-text</x:ref> = %x80-FF
4532
4533<x:ref>partial-URI</x:ref> = relative-part [ "?" query ]
4534<x:ref>path-abempty</x:ref> = &lt;path-abempty, defined in [RFC3986], Section 3.3&gt;
4535<x:ref>path-absolute</x:ref> = &lt;path-absolute, defined in [RFC3986], Section 3.3&gt;
4536<x:ref>port</x:ref> = &lt;port, defined in [RFC3986], Section 3.2.3&gt;
4537<x:ref>product</x:ref> = token [ "/" product-version ]
4538<x:ref>product-version</x:ref> = token
4539<x:ref>protocol-name</x:ref> = token
4540<x:ref>protocol-version</x:ref> = token
4541<x:ref>pseudonym</x:ref> = token
4542
4543<x:ref>qdtext</x:ref> = OWS / "!" / %x23-5B ; '#'-'['
4544 / %x5D-7E ; ']'-'~'
4545 / obs-text
4546<x:ref>query</x:ref> = &lt;query, defined in [RFC3986], Section 3.4&gt;
4547<x:ref>quoted-pair</x:ref> = "\" quoted-text
4548<x:ref>quoted-string</x:ref> = DQUOTE *( qdtext / quoted-pair ) DQUOTE
4549<x:ref>quoted-text</x:ref> = %x01-09 / %x0B-0C / %x0E-FF
4550<x:ref>qvalue</x:ref> = ( "0" [ "." *3DIGIT ] ) / ( "1" [ "." *3"0" ] )
4551
4552<x:ref>received-by</x:ref> = ( uri-host [ ":" port ] ) / pseudonym
4553<x:ref>received-protocol</x:ref> = [ protocol-name "/" ] protocol-version
4554<x:ref>relative-part</x:ref> = &lt;relative-part, defined in [RFC3986], Section 4.2&gt;
4555<x:ref>request-header</x:ref> = &lt;request-header, defined in [Part2], Section 3&gt;
4556<x:ref>request-target</x:ref> = "*" / absolute-URI / ( path-absolute [ "?" query ] )
4557 / authority
4558<x:ref>response-header</x:ref> = &lt;response-header, defined in [Part2], Section 5&gt;
4559<x:ref>rfc1123-date</x:ref> = day-name "," SP date1 SP time-of-day SP GMT
4560<x:ref>rfc850-date</x:ref> = day-name-l "," SP date2 SP time-of-day SP GMT
4561
4562<x:ref>second</x:ref> = 2DIGIT
4563<x:ref>start-line</x:ref> = Request-Line / Status-Line
4564
4565<x:ref>t-codings</x:ref> = "trailers" / ( transfer-extension [ te-params ] )
4566<x:ref>tchar</x:ref> = "!" / "#" / "$" / "%" / "&amp;" / "'" / "*" / "+" / "-" / "." /
4567 "^" / "_" / "`" / "|" / "~" / DIGIT / ALPHA
4568<x:ref>te-ext</x:ref> = OWS ";" OWS token [ "=" ( token / quoted-string ) ]
4569<x:ref>te-params</x:ref> = OWS ";" OWS "q=" qvalue *te-ext
4570<x:ref>time-of-day</x:ref> = hour ":" minute ":" second
4571<x:ref>token</x:ref> = 1*tchar
4572<x:ref>trailer-part</x:ref> = *( entity-header CRLF )
4573<x:ref>transfer-coding</x:ref> = "chunked" / transfer-extension
4574<x:ref>transfer-extension</x:ref> = token *( OWS ";" OWS transfer-parameter )
4575<x:ref>transfer-parameter</x:ref> = attribute BWS "=" BWS value
4576
4577<x:ref>uri-host</x:ref> = &lt;host, defined in [RFC3986], Section 3.2.2&gt;
4578
4579<x:ref>value</x:ref> = token / quoted-string
4580
4581<x:ref>year</x:ref> = 4DIGIT
4582</artwork>
4583</figure>
4584<figure><preamble>ABNF diagnostics:</preamble><artwork type="inline">
4585; Chunked-Body defined but not used
4586; Content-Length defined but not used
4587; HTTP-message defined but not used
4588; Host defined but not used
4589; Request defined but not used
4590; Response defined but not used
4591; TE defined but not used
4592; URI defined but not used
4593; URI-reference defined but not used
4594; http-URI defined but not used
4595; https-URI defined but not used
4596; partial-URI defined but not used
4597</artwork></figure></section>
4598
4599<section title="Change Log (to be removed by RFC Editor before publication)" anchor="change.log">
4600
4601<section title="Since RFC2616">
4602<t>
4603  Extracted relevant partitions from <xref target="RFC2616"/>.
4604</t>
4605</section>
4606
4607<section title="Since draft-ietf-httpbis-p1-messaging-00">
4608<t>
4609  Closed issues:
4610  <list style="symbols">
4611    <t>
4612      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/1"/>:
4613      "HTTP Version should be case sensitive"
4614      (<eref target="http://purl.org/NET/http-errata#verscase"/>)
4615    </t>
4616    <t>
4617      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/2"/>:
4618      "'unsafe' characters"
4619      (<eref target="http://purl.org/NET/http-errata#unsafe-uri"/>)
4620    </t>
4621    <t>
4622      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/3"/>:
4623      "Chunk Size Definition"
4624      (<eref target="http://purl.org/NET/http-errata#chunk-size"/>)
4625    </t>
4626    <t>
4627      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/4"/>:
4628      "Message Length"
4629      (<eref target="http://purl.org/NET/http-errata#msg-len-chars"/>)
4630    </t>
4631    <t>
4632      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/8"/>:
4633      "Media Type Registrations"
4634      (<eref target="http://purl.org/NET/http-errata#media-reg"/>)
4635    </t>
4636    <t>
4637      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/11"/>:
4638      "URI includes query"
4639      (<eref target="http://purl.org/NET/http-errata#uriquery"/>)
4640    </t>
4641    <t>
4642      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/15"/>:
4643      "No close on 1xx responses"
4644      (<eref target="http://purl.org/NET/http-errata#noclose1xx"/>)
4645    </t>
4646    <t>
4647      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/16"/>:
4648      "Remove 'identity' token references"
4649      (<eref target="http://purl.org/NET/http-errata#identity"/>)
4650    </t>
4651    <t>
4652      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/26"/>:
4653      "Import query BNF"
4654    </t>
4655    <t>
4656      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/31"/>:
4657      "qdtext BNF"
4658    </t>
4659    <t>
4660      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/35"/>:
4661      "Normative and Informative references"
4662    </t>
4663    <t>
4664      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/42"/>:
4665      "RFC2606 Compliance"
4666    </t>
4667    <t>
4668      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/45"/>:
4669      "RFC977 reference"
4670    </t>
4671    <t>
4672      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/46"/>:
4673      "RFC1700 references"
4674    </t>
4675    <t>
4676      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/47"/>:
4677      "inconsistency in date format explanation"
4678    </t>
4679    <t>
4680      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/48"/>:
4681      "Date reference typo"
4682    </t>
4683    <t>
4684      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/65"/>:
4685      "Informative references"
4686    </t>
4687    <t>
4688      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/66"/>:
4689      "ISO-8859-1 Reference"
4690    </t>
4691    <t>
4692      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/86"/>:
4693      "Normative up-to-date references"
4694    </t>
4695  </list>
4696</t>
4697<t>
4698  Other changes:
4699  <list style="symbols">
4700    <t>
4701      Update media type registrations to use RFC4288 template.
4702    </t>
4703    <t>
4704      Use names of RFC4234 core rules DQUOTE and WSP,
4705      fix broken ABNF for chunk-data
4706      (work in progress on <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>)
4707    </t>
4708  </list>
4709</t>
4710</section>
4711
4712<section title="Since draft-ietf-httpbis-p1-messaging-01">
4713<t>
4714  Closed issues:
4715  <list style="symbols">
4716    <t>
4717      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/19"/>:
4718      "Bodies on GET (and other) requests"
4719    </t>
4720    <t>
4721      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/55"/>:
4722      "Updating to RFC4288"
4723    </t>
4724    <t>
4725      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/57"/>:
4726      "Status Code and Reason Phrase"
4727    </t>
4728    <t>
4729      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/82"/>:
4730      "rel_path not used"
4731    </t>
4732  </list>
4733</t>
4734<t>
4735  Ongoing work on ABNF conversion (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>):
4736  <list style="symbols">
4737    <t>
4738      Get rid of duplicate BNF rule names ("host" -> "uri-host", "trailer" ->
4739      "trailer-part").
4740    </t>
4741    <t>
4742      Avoid underscore character in rule names ("http_URL" ->
4743      "http-URL", "abs_path" -> "path-absolute").
4744    </t>
4745    <t>
4746      Add rules for terms imported from URI spec ("absoluteURI", "authority",
4747      "path-absolute", "port", "query", "relativeURI", "host) -- these will
4748      have to be updated when switching over to RFC3986.
4749    </t>
4750    <t>
4751      Synchronize core rules with RFC5234.
4752    </t>
4753    <t>
4754      Get rid of prose rules that span multiple lines.
4755    </t>
4756    <t>
4757      Get rid of unused rules LOALPHA and UPALPHA.
4758    </t>
4759    <t>
4760      Move "Product Tokens" section (back) into Part 1, as "token" is used
4761      in the definition of the Upgrade header.
4762    </t>
4763    <t>
4764      Add explicit references to BNF syntax and rules imported from other parts of the specification.
4765    </t>
4766    <t>
4767      Rewrite prose rule "token" in terms of "tchar", rewrite prose rule "TEXT".
4768    </t>
4769  </list>
4770</t>
4771</section>
4772
4773<section title="Since draft-ietf-httpbis-p1-messaging-02" anchor="changes.since.02">
4774<t>
4775  Closed issues:
4776  <list style="symbols">
4777    <t>
4778      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/51"/>:
4779      "HTTP-date vs. rfc1123-date"
4780    </t>
4781    <t>
4782      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/64"/>:
4783      "WS in quoted-pair"
4784    </t>
4785  </list>
4786</t>
4787<t>
4788  Ongoing work on IANA Message Header Registration (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/40"/>):
4789  <list style="symbols">
4790    <t>
4791      Reference RFC 3984, and update header registrations for headers defined
4792      in this document.
4793    </t>
4794  </list>
4795</t>
4796<t>
4797  Ongoing work on ABNF conversion (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>):
4798  <list style="symbols">
4799    <t>
4800      Replace string literals when the string really is case-sensitive (HTTP-Version).
4801    </t>
4802  </list>
4803</t>
4804</section>
4805
4806<section title="Since draft-ietf-httpbis-p1-messaging-03" anchor="changes.since.03">
4807<t>
4808  Closed issues:
4809  <list style="symbols">
4810    <t>
4811      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/28"/>:
4812      "Connection closing"
4813    </t>
4814    <t>
4815      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/97"/>:
4816      "Move registrations and registry information to IANA Considerations"
4817    </t>
4818    <t>
4819      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/120"/>:
4820      "need new URL for PAD1995 reference"
4821    </t>
4822    <t>
4823      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/127"/>:
4824      "IANA Considerations: update HTTP URI scheme registration"
4825    </t>
4826    <t>
4827      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/128"/>:
4828      "Cite HTTPS URI scheme definition"
4829    </t>
4830    <t>
4831      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/129"/>:
4832      "List-type headers vs Set-Cookie"
4833    </t>
4834  </list>
4835</t>
4836<t>
4837  Ongoing work on ABNF conversion (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>):
4838  <list style="symbols">
4839    <t>
4840      Replace string literals when the string really is case-sensitive (HTTP-Date).
4841    </t>
4842    <t>
4843      Replace HEX by HEXDIG for future consistence with RFC 5234's core rules.
4844    </t>
4845  </list>
4846</t>
4847</section>
4848
4849<section title="Since draft-ietf-httpbis-p1-messaging-04" anchor="changes.since.04">
4850<t>
4851  Closed issues:
4852  <list style="symbols">
4853    <t>
4854      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/34"/>:
4855      "Out-of-date reference for URIs"
4856    </t>
4857    <t>
4858      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/132"/>:
4859      "RFC 2822 is updated by RFC 5322"
4860    </t>
4861  </list>
4862</t>
4863<t>
4864  Ongoing work on ABNF conversion (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>):
4865  <list style="symbols">
4866    <t>
4867      Use "/" instead of "|" for alternatives.
4868    </t>
4869    <t>
4870      Get rid of RFC822 dependency; use RFC5234 plus extensions instead.
4871    </t>
4872    <t>
4873      Only reference RFC 5234's core rules.
4874    </t>
4875    <t>
4876      Introduce new ABNF rules for "bad" whitespace ("BWS"), optional
4877      whitespace ("OWS") and required whitespace ("RWS").
4878    </t>
4879    <t>
4880      Rewrite ABNFs to spell out whitespace rules, factor out
4881      header value format definitions.
4882    </t>
4883  </list>
4884</t>
4885</section>
4886
4887<section title="Since draft-ietf-httpbis-p1-messaging-05" anchor="changes.since.05">
4888<t>
4889  Closed issues:
4890  <list style="symbols">
4891    <t>
4892      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/30"/>:
4893      "Header LWS"
4894    </t>
4895    <t>
4896      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/52"/>:
4897      "Sort 1.3 Terminology"
4898    </t>
4899    <t>
4900      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/63"/>:
4901      "RFC2047 encoded words"
4902    </t>
4903    <t>
4904      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/74"/>:
4905      "Character Encodings in TEXT"
4906    </t>
4907    <t>
4908      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/77"/>:
4909      "Line Folding"
4910    </t>
4911    <t>
4912      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/83"/>:
4913      "OPTIONS * and proxies"
4914    </t>
4915    <t>
4916      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/94"/>:
4917      "Reason-Phrase BNF"
4918    </t>
4919    <t>
4920      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/111"/>:
4921      "Use of TEXT"
4922    </t>
4923    <t>
4924      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/118"/>:
4925      "Join "Differences Between HTTP Entities and RFC 2045 Entities"?"
4926    </t>
4927    <t>
4928      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/134"/>:
4929      "RFC822 reference left in discussion of date formats"
4930    </t>
4931  </list>
4932</t>
4933<t>
4934  Final work on ABNF conversion (<eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/36"/>):
4935  <list style="symbols">
4936    <t>
4937      Rewrite definition of list rules, deprecate empty list elements.
4938    </t>
4939    <t>
4940      Add appendix containing collected and expanded ABNF.
4941    </t>
4942  </list>
4943</t>
4944<t>
4945  Other changes:
4946  <list style="symbols">
4947    <t>
4948      Rewrite introduction; add mostly new Architecture Section.
4949    </t>
4950    <t>
4951      Move definition of quality values from Part 3 into Part 1;
4952      make TE request header grammar independent of accept-params (defined in Part 3).
4953    </t>
4954  </list>
4955</t>
4956</section>
4957
4958<section title="Since draft-ietf-httpbis-p1-messaging-06" anchor="changes.since.06">
4959<t>
4960  Closed issues:
4961  <list style="symbols">
4962    <t>
4963      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/161"/>:
4964      "base for numeric protocol elements"
4965    </t>
4966    <t>
4967      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/162"/>:
4968      "comment ABNF"
4969    </t>
4970  </list>
4971</t>
4972<t>
4973  Partly resolved issues:
4974  <list style="symbols">
4975    <t>
4976      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/88"/>:
4977      "205 Bodies" (took out language that implied that there may be
4978      methods for which a request body MUST NOT be included)
4979    </t>
4980    <t>
4981      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/163"/>:
4982      "editorial improvements around HTTP-date"
4983    </t>
4984  </list>
4985</t>
4986</section>
4987
4988<section title="Since draft-ietf-httpbis-p1-messaging-07" anchor="changes.since.07">
4989<t>
4990  Closed issues:
4991  <list style="symbols">
4992    <t>
4993      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/93"/>:
4994      "Repeating single-value headers"
4995    </t>
4996    <t>
4997      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/157"/>:
4998      "IP addresses in URLs"
4999    </t>
5000    <t>
5001      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/188"/>:
5002      "pick IANA policy (RFC5226) for Transfer Coding / Content Coding"
5003    </t>
5004  </list>
5005</t>
5006<t>
5007  Partly resolved issues:
5008  <list style="symbols">
5009    <t>
5010      <eref target="http://tools.ietf.org/wg/httpbis/trac/ticket/148"/>:
5011      "update IANA requirements wrt Transfer-Coding values" (add the
5012      IANA Considerations subsection)
5013    </t>
5014  </list>
5015</t>
5016
5017</section>
5018
5019</section>
5020
5021</back>
5022</rfc>
Note: See TracBrowser for help on using the repository browser.